Preliminary Development of a Novel Resorbable Synthetic Polymer Fiber Scaffold for Anterior Cruciate Ligament Reconstruction
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
We are developing novel resorbable fiber-based scaffolds for reconstruction of the anterior cruciate ligament (ACL). For the first time, we report fabrication of fibers from poly(DTE carbonate) polymer. Poly(L-lactic acid) fibers were also fabricated for comparison purposes. The study was performed in three phases. In phase I, first-generation fibers were found to promote tissue ingrowth in a subcutaneous model. In phase II, second-generation fibers were fabricated from poly(DTE carbonate) and poly(L-lactic acid), with diameters of 79 and 72 microm, ultimate tensile strengths of 230 and 299 MPa, moduli of 3.1 and 4.9 GPa, and molecular weights of 65000 and 170000, respectively. These fibers were evaluated on the basis of molecular weight retention, strength retention, and cytocompatibility. After 30 weeks of incubation in phosphate-buffered saline, poly(DTE carbonate) and poly(L-lactic acid) fibers had 87 and 7% strength retention, respectively. Similar trends were observed for molecular weight loss. Fibroblasts attached and proliferated equally well on both scaffold types in vitro. Finally, in phase III, a prototype ACL reconstruction device was fabricated from poly(DTE carbonate) fibers with strength values comparable to those of the normal ACL (57 MPa). Collectively, these data suggest that poly(DTE carbonate) fibers are potentially useful for development of resorbable scaffolds for ACL reconstruction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ligament tissue engineering: An evolutionary materials science approach
Laurencin, C. T., & Freeman, J. W. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.073 · Cited by 304
Cited by
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Biodegradable polymers applied in tissue engineering research: a review
Martina, M., & Hutmacher, D. W. (2007) · Polymer International · doi:10.1002/pi.2108 · Cited by 449
Lu, H. H., Cooper, J. A., Manuel, S., Freeman, J. W., Attawia, M. A., Ko, F. K., & Laurencin, C. T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.050 · Cited by 380
Metadata
- Authors
- Bourke, S. L., Kohn, J., & Dunn, M. G.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2004-01
- Volume
- 10
- Issue
- 1-2
- Pages
- 43-52
- ISSN
- 1076-3279 (ISSN-L)
- 1557-8690
- OpenAlex
- W2048149237
- Cited by
- 91
- References
- 1
- FWCI
- 4.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.