The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
3D-Printed Wood: Programming Hygroscopic Material Transformations
Open accessAbstract
Abstract Rapid advances in digital fabrication technologies and new materials development allow for direct control and programmability of physical material transformations. By utilizing multimaterial 3D printing technologies and anisotropic material compositions, we can physically program hygroscopic materials such as wood to precisely sense and self-transform based on fluctuations in the environment. While wood remains one of the most common building materials in use today, it is still predominantly designed to be industrially standardized rather than taking advantage of its inherent anisotropic properties. This research aims to enhance wood's anisotropic and hygroscopic properties by designing and 3D printing custom wood grain structures to promote tunable self-transformation. In this article we present new methods for designing hygroscopic wood transformations and custom techniques for energy activation. A differentiated printing method promotes wood transformation solely through the design of custom-printed wood fibers. Alternatively, a multimaterial printing method allows for greater control and intensified wood transformations through the precise design of multimaterial prints composed of both synthetic wood and polymers. The presented methods, techniques, and material tests demonstrate the first successful results of differentiated printed wood for self-transforming behavior, suggesting a new approach for programmable material and responsive architectures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Self-citation
Cited by
Recent advancements of plant-based natural fiber–reinforced composites and their applications
Li, M., Pu, Y., Thomas, V. M., Yoo, C. G., Ozcan, S., Deng, Y., Nelson, K., & Ragauskas, A. J. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108254 · Cited by 755
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Mazzanti, V., Malagutti, L., & Mollica, F. (2019) · Polymers · doi:10.3390/polym11071094 · Cited by 666
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Faber, J. A., Arrieta, A. F., & Studart, A. R. (2018) · Science · doi:10.1126/science.aap7753 · Cited by 434
3D printing with cellulose materials
Wang, Q., Sun, J., Yao, Q., Ji, C., Liu, J., & Zhu, Q. (2018) · Cellulose · doi:10.1007/s10570-018-1888-y · Cited by 324
Metadata
- Authors
- Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S.
- Venue
- 3D Printing and Additive Manufacturing
- Publisher
- SAGE Publications
- Published
- 2015-09
- Volume
- 2
- Issue
- 3
- Pages
- 106-116
- ISSN
- 2329-7662 (ISSN-L)
- 2329-7670
- OpenAlex
- W1766653913
- Cited by
- 202
- References
- 1
- FWCI
- 197.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.