Chemometric Modelling based on 2D-Fluorescence Spectra without a Calibration Measurement
Open accessThe DOI matches its Crossref record.
Abstract
Motivation: 2D fluorescence spectra provide information from intracellular compounds. Fluorophores like trytophan, tyrosine and phenylalanin as well as NADH and flavins make the corresponding measurement systems very important for bioprocess supervision and control. The evaluation is usually based on chemometric modelling using for their calibration procedure off-line measurements of the desired process variables. Due to the data driven approach lots of off-line measurements are required. Here a methodology is presented, which enables to perform a calibration procedure of chemometric models without any further measurement. Results: The necessary information for the calibration procedure is provided by means of the a priori knowledge about the process, i.e. a mathematical model, whose model parameters are estimated during the calibration procedure, as well as the fact that the substrate should be consumed at the end of the process run. The new methodology for chemometric calibration is applied for a batch cultivation of aerobically grown S. cerevisiae on the glucose Schatzmann medium. As will be presented the chemometric models, which are determined by this method, can be used for prediction during new process runs. Availability:The MATHLAB routine is free available on request from the authors. Contact: Hitzmann@IFTC.Uni-Hannover.de * To whom correspondence should be addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Optimization and scale up of industrial fermentation processes
Schmidt, F. R. (2005) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-005-0003-0 · Cited by 362
“For analysis, interpretation and correlation of the obtained signals and data through chemometric modelling (Boehl et al. 2003; Solle et al. 2003), neural network tools (e.g. Unscrambler 9.0, Camo, Norway) seem to gain an increasing important role (Ferreira et al. 2001).”
InfluentialSensor systems for bioprocess monitoring
Biechele, P., Busse, C., Solle, D., Scheper, T., & Reardon, K. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201500014 · Cited by 224
“There has been a considerable effort to produce such a representative data basis for process variables and corresponding spectroscopic data [211, 212].”
BackgroundSelf-citationBetween the Poles of Data‐Driven and Mechanistic Modeling for Process Operation
Solle, D., Hitzmann, B., Herwig, C., Pereira Remelhe, M., Ulonska, S., Wuerth, L., Prata, A., & Steckenreiter, T. (2017) · Chemie Ingenieur Technik · doi:10.1002/cite.201600175 · Cited by 134
Self-citationSensors in Disposable Bioreactors Status and Trends
Glindkamp, A., Riechers, D., Rehbock, C., Hitzmann, B., Scheper, T., & Reardon, K. F. (2009) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/10_2009_10 · Cited by 65
Self-citation
Metadata
- Authors
- Solle, D., Geissler, D., Stärk, E., Scheper, T., & Hitzmann, B.
- Venue
- Bioinformatics
- Publisher
- Oxford University Press (OUP)
- Published
- 2003-01-22
- Volume
- 19
- Issue
- 2
- Pages
- 173-177
- ISSN
- 1367-4803 (ISSN-L)
- 1367-4811
- OpenAlex
- W2116649014
- Cited by
- 41
- References
- 0
- FWCI
- 3.49
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chemometric Modelling based on 2D-Fluorescence Spectra without a Calibration Measurement. https://app.cochat.ai/papers/10.1093/bioinformatics/19.2.173
- The paper
- Solle, D., Geissler, D., Stärk, E., Scheper, T., & Hitzmann, B. (2003). Chemometric Modelling based on 2D-Fluorescence Spectra without a Calibration Measurement. Bioinformatics. https://doi.org/10.1093/bioinformatics/19.2.173
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.