Implementation of Reference Systems in Laboratory Medicine
Open accessThe DOI matches its Crossref record.
Abstract
In laboratory medicine, meaningful measurements are essential for the diagnosis, risk assessment, treatment, and follow-up of patients; therefore, methods applied in diagnostic measurements must be accurate, precise, specific, and comparable among laboratories (1). A given analytical measurement has only one true result, and the reliability of a measurement lies both in the result obtained and in the performance of a well-defined measurement procedure. Inadequate or incorrect analytical performance has consequences for the patient, the clinician, and the healthcare system. Poor-quality laboratory results may lead to incorrect interpretation by the physician, to a wrong diagnosis, and hence to treatment that impairs, or at least does not help, the patient’s situation. Measurement procedures in laboratory medicine should not be based on consensus but must follow the established rules of metrology as outlined in the International Vocabulary of Basic and General Terms in Metrology (VIM) (2). According to VIM, metrology includes all aspects of measurements in whatever fields of science or technology they occur. One key element of metrology is the traceability of a test result to the International System (SI), which ensures comparable results for different measurements of the same analyte in the same sample. “Traceability” is defined as the property of the result related to national or international standards through an unbroken chain of comparisons, each of which has stated uncertainties (2). The importance of these metrologic principles is described in an International Organization for Standardization (ISO)/European Committee for Standardization (CEN) standard (3). These rules must be followed if results of diagnostic measurements are to be comparable and true wherever in the world they are performed. Given the increased mobility of patients, comparable (true) test results are essential for a rational and cost-effective diagnostic approach. To reach these goals, international and regional organizations such as the ISO, the CEN, the IFCC, the International Union for Pure and Applied Chemistry (IUPAC), the International Council for Standardization in Hematology, and the NCCLS have agreed on a metrologically sound Reference System. In laboratory medicine, a Reference System consists of a network of reference laboratories that use Reference Methods and Certified Reference Materials (CRMs) for optimal measurement of analytes in various biological matrices (4)(5)(6)(7)(8). Reference laboratories, analytical centers of competence, perform measurements with the greatest competence and are considered expert institutions for quantifying certain well-defined analytes, using the best, internationally agreed-on measurement procedure. Their main responsibility is to assign target values to Reference Materials, using the best analytical method available. In addition, they establish for so-called routine methods the extent of associated analytical bias in comparison with primary methods, with established Reference Methods, or if no Reference Method has been developed, with designated comparison methods. Thus, these laboratories establish through a chain of comparisons the traceability of routine methods and their respective biases. According to the International Centre for Metrology, isotope dilution with mass spectrometry, coulometry, gravimetry, titrimetry, and determination of freezing-point depression are primary methods, yielding results in SI units (moles) without requiring reference to a standard (9). However, these kinds of methods are applicable only for the measurement of elements and of exactly defined metabolites, which is not the case for many of the analytes used for clinical diagnosis. In laboratory medicine, the exact definition of the analyte, its biological and clinical function, and the influence of the matrix are crucial elements when establishing a Reference Method. An analyst first must know what to measure before deciding by which means the analyte (enzyme, protein, isoform, or metabolite) can be measured. These two steps usually are formalized by an expert committee. The Reference Method (the highest possible level in the metrologic hierarchy) needs to be specific for the defined analyte, and the chemical, biochemical, or immunological reaction used in the method must be well defined and completely described. Moreover, a statement of the uncertainty of the measurement must be included. These methods must be reproducible in time and space, which means that if the description of the method is followed, the true values obtained in a certain sample must be within the described uncertainty. When based on the most up-to-date knowledge, Reference Methods are considered “Definitive Methods”. In cases where no Reference Method is available for an analyte, a so-called designated comparison method can be established according to the principles mentioned above. After extensive analytical investigations, such method
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
for the IOF-IFCC Bone Marker Standards Working Group, Vasikaran, S., Eastell, R., Bruyère, O., Foldes, A. J., Garnero, P., Griesmacher, A., McClung, M., Morris, H. A., Silverman, S., et al. (2011) · Osteoporosis International · doi:10.1007/s00198-010-1501-1 · Cited by 1,212
“Standardisation and the establishment of a reference system [147] for the BTMs is the route to achieve this.”
BackgroundHoelzel, W., Weykamp, C., Jeppsson, J.-O., Miedema, K., Barr, J. R., Goodall, I., Hoshino, T., John, W. G., Kobold, U., Little, R., et al. (2004) · Clinical Chemistry · doi:10.1373/clinchem.2003.024802 · Cited by 690
“All of these national initiatives were important steps toward improvement of the comparability of HbA1c test results, but national standardization programs based on different DCMs cannot replace uniform worldwide standardization anchored on a metrologically sound international reference measurement system (15, 16) com…”
BackgroundReference intervals: the way forward
Ceriotti, F., Hinzmann, R., & Panteghini, M. (2009) · Annals of Clinical Biochemistry: International Journal of Laboratory Medicine · doi:10.1258/acb.2008.008170 · Cited by 199
Van Uytfanghe, K., Stöckl, D., Kaufman, J. M., Fiers, T., De Leenheer, A., & Thienpont, L. M. (2005) · Clinical Biochemistry · doi:10.1016/j.clinbiochem.2004.12.001 · Cited by 71
Thyrotropin Isoforms: Implications for Thyrotropin Analysis and Clinical Practice
Estrada, J. M., Soldin, D., Buckey, T. M., Burman, K. D., & Soldin, O. P. (2014) · Thyroid® · doi:10.1089/thy.2013.0119 · Cited by 64
Metadata
- Authors
- Müller, M. M.
- Venue
- Clinical Chemistry
- Publisher
- Oxford University Press (OUP)
- Published
- 2000-12-01
- Volume
- 46
- Issue
- 12
- Pages
- 1907-1909
- ISSN
- 0009-9147 (ISSN-L)
- 1530-8561
- OpenAlex
- W2170520545
- Cited by
- 99
- References
- 0
- FWCI
- 2.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Implementation of Reference Systems in Laboratory Medicine. https://app.cochat.ai/papers/10.1093/clinchem/46.12.1907
- The paper
- Müller, M. M. (2000). Implementation of Reference Systems in Laboratory Medicine. Clinical Chemistry. https://doi.org/10.1093/clinchem/46.12.1907
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.