CoChat
Sign Up
Cited by 264Forest ecology and managementForest Management and PolicyWood Treatment and Properties

A review of the effects of silviculture on timber quality of Sitka spruce

Macdonald, E.·2002·Forestry
DOI 10.1093/forestry/75.2.107
Open this paper in CoChat — free account

Abstract

This review focuses on timber quality with a particular emphasis on Sitka spruce and sawlog production, although issues pertaining to pulp and panel quality are also dealt with. The review is split into three broad areas. The first covers the factors controlling wood quality that operate within the timber itself and also at the whole‐tree scale. These include knots, grain angle, wood density, tracheid length, microfibril angle, juvenile wood and compression wood, tree/log size, growth rate, stem straightness and stem taper. The second section reviews the link between silviculture, site and genetics on these controlling factors and the consequences for wood quality for different end‐uses. The silvicultural factors reviewed are rotation length, initial spacing, respacing before canopy closure, thinning after canopy closure, nursing mixtures, pruning, cultivation, weed suppression and fertilizer use. Site factors include site quality, wind, slope, and snow and ice. There is a brief section on the role of genetic improvement on timber quality. Finally, the review provides conclusions and recommends that stands should be identified as being suitable for sawlogs or fibre products and then managed consistently throughout the rotation with a strong focus on the final wood product. For Sitka spruce, the objective of maximizing volume yield appears to be compromising batten performance and buyers should consider premiums for stands where quality has been provided rather than quantity. Long‐term forest plans and certification could play an increasing role in providing the assurance that good consistent silvicultural practice had been undertaken throughout the rotation, hence creating the possibility of offering clear premiums for high grade timber.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1093/forestry/75.2.107

Cites

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Cites

No references could be resolved yet.

Research works printed but not linked: 53

  1. Baldwin, E. 1993 Leader breakage in upland spruce plantations. Scot. For. 47(2), 5-29.
  2. Brazier, J.D. 1986 Growth features and structural wood performance. In Proceedings Division 18th IUFRO World Congress, Yugoslavia, pp. 37-49.
  3. Brazier, J.D., Hands, R. and Seal, D.T. 1985 Structural wood yields for Sitka spruce: the effect of planting spacing. For. B. Timber 14(9), 34-37.
  4. Briggs, D.G. and Smith, W.R. 1986 Effect of silvicul- tural practices on wood properties of conifers: a review. In Douglas Fir: Stand Management for the Future. C. Oliver, D. Hanley and J. Johnson (eds). University of Washington Press, Seattle, pp. 108-117.
  5. Bryan, J. and Pearson, F.G.O. 1955 The quality of Sitka spruce grown in Great Britain. Emp. For. Rev. 34, 144-149.
  6. Cave, I.D. and Walker, J.C.F. 1994 Stiffness of wood in fast-grown plantation softwoods: the influence of microfibril angle. For. Prod. J. 44(5), 43-48.
  7. Cowdrey, D.R. and Preston, R.D. 1966 Elasticity and microfibrillar angle in the wood of Sitka spruce. Proc. R. Soc. Lond. 166B, 245-272.
  8. Cown, D.J. and McConchie, D.L. 1981 Effects of thin- ning and fertiliser application on wood properties of Pinus radiata. N. Z. J. For. Sci. 11(2), 79-91.
  9. Cown, D.J., Walford, B. and Kimberley, M.O. 1995 Cross-grain effect on tensile strength and bending stiffness of Pinus radiata structural lumber. N. Z. J. For. Sci. 25(2), 256-262.
  10. Davies E.J.M. 1979 The future development of even- aged plantations: management implications. In The Ecology of Even-Aged Forest Plantations. E.D. Ford, D.C. Malcolm and J. Atterson (eds). Proceedings of the Meeting of Division I. IUFRO, Edinburgh, Sep- tember 1978. IUFRO, pp. 465-480.
  11. Desch, H.E. and Dinwoodie, J.M. 1996 Timber Struc- ture, Properties, Conversion and Use. MacMillan Press, London.
  12. Dickson, R.L. and Walker, J.C.F. 1997 Selecting wood quality characteristics for pines. In Timber Man- agement Toward Wood Quality and End-Product Value. S.Y. Zhang, R. Gosselin and G. Chauret (eds). Proceedings of the CTIA/IUFRO International Wood Quality Workshop, Quebec City. Part IV, pp. 45-52.
  13. Dinwoodie, J.M. 1961 Tracheid and fibre length in timber: a review of literature. Forestry 34, 125-144.
  14. Elliott, G.K. 1970 Wood Density in Conifers. Technical Communication No. 8. Commonwealth Forestry Bureau, Oxford, England.
  15. Faivre Rampant, P., Anselin, F., Arcade, A., Lesage, M.C., Millier, F., Pâques, L.E., Prat, D. and Rozen- berg, P. 1997 Investigation of wood quality through molecular markers in larch. In Timber Management Toward Wood Quality and End-Product Value. S.Y. Zhang, R. Gosselin and G. Chauret (eds). Proceed- ings of the CTIA/IUFRO International Wood Quality Workshop, Quebec City. Part IV, pp, 63-68.
  16. Forest Enterprise 1996 Strategic review -thinning. Unpublished internal report. Forestry Commission 1993 Classification and presen- tation of softwood sawlogs. Forestry Commission Field Book 9. HMSO, London. Forestry Commission 1996 Towards a Framework for Forestry -an Issues Paper for the Home Grown Timber Advisory Committee. HGTAC Paper 36/96.
  17. Gardiner, B.A. and Quine, C.P. 2000 Management of forests to reduce the risk of abiotic damage: a review with particular reference to the effects of strong winds. For. Ecol. Manage. 135, 261-277.
  18. Gibson, J. 1995 Provenance variation in wood proper- ties of Sitka spruce. Unpublished MSc thesis, Bangor University.
  19. Harding, T. 1988 British softwoods: properties and uses. Forestry Commission Bulletin 77. HMSO, London.
  20. Harris, J.M. 1989 Spiral Grain and Wave Phenomena in Wood Formation. Springer-Verlag, Berlin.
  21. Henman, D.W. 1963 Pruning conifers for the produc- tion of quality timber. Forestry Commission Bulletin No. 35. HMSO, London.
  22. Hibberd, B.G. (ed.) 1991 Forestry practice. Forestry Commission Handbook 6. HMSO, London.
  23. Hsu, E.W. 1997 Wood quality requirements for panel products. In Timber Management Toward Wood Quality and End-Product Value. S.Y. Zhang, R. Gosselin and G. Chauret (eds). Proceedings of the CTIA/IUFRO International Wood Quality Work- shop, Quebec City. Part I, pp. 7-10.
  24. Klem, G.S. 1968 Quality of wood from fertilised forests. Tappi 51(11), 99A-103A.
  25. Kollmann, F.F.P. and Côté, W.A. 1968 Principles of Wood Science and Technology. 1. Solid Wood. Springer-Verlag, Berlin.
  26. Lee, S.J. 2001 Revised predicted gains from Sitka spruce seed orchards. For. Br. Timber 30(3), 6.
  27. Low, A.J. 1964 Compression wood in conifers: a review of literature. Forestry Abstracts 25(3), 25(4), xxxv-li.
  28. Macdonald, E.C. 1990 Effects of fertilizer application on the wood quality of Sitka spruce. Unpublished MSc thesis, Aberdeen University.
  29. Megraw, R.A. 1986 Effect of silvicultural practices on wood quality. In TAPPI 1996 Research and Develop- ment Conference. TAPPI, Raleigh, California, pp. 27-34.
  30. Moore, D.G. 1973 The oceanic forest: a study in profit- ability. Scot. For. 27(2), 93-102.
  31. Ni Dhubhain, A., Evertson, J.A. and Gardiner, J.J. 1988 The influence of compression wood on the strength properties of Sitka spruce. For. Prod. J. 38(9), 67-69.
  32. Nixon, C.J. and Worrell, R. 1999 The potential for the natural regeneration of conifers in Britain. Forestry Commission Bulletin 120. Forestry Commission, Edinburgh.
  33. Ogilvie, J.F. and Taylor, C.S. 1984 Chemical silviculture (chemical thinning and respacement). Scot. For. 38(2), 83-88.
  34. Panshin, A.J., de Zeeuw, C. and Brown, H.P. 1964 Text- book of Wood Technology, Vol. I. McGraw-Hill, New York.
  35. Parker, M.L., Hunt, K., Warren, W.G. and Kennedy, R.W. 1976 Effect of thinning and fertilisation on intra-ring characteristics and Kraft pulp yield of Douglas fir. In Applied Polymer Symposium. John Wiley and Sons. No. 28, pp. 1075-1086.
  36. Phillips, E.W.J. 1941 The inclination of the fibrils in the cell wall and its relation to the compression strength of timber. Empire Forestry Journal 20, 74-78.
  37. Rendle, B.J. 1959 Juvenile and adult wood. J. Inst. Wood Sci. 1(5), 58-61.
  38. Rook, D.A. (ed.) 1992 Super Sitka for the 90s. Forestry Commission Bulletin 103. HMSO, London.
  39. Rozenberg, P. and Cahalan, C. 1997 Spruce and wood quality: genetic aspects (A review). Silv. Genet. 46, 270-279.
  40. Schaible, R. 1994 Letter to the Editor. Forestry 67(4), 351.
  41. Shepard, R.K. 1982 Fertilisation effects on specific gravity and diameter growth of red spruce. Wood Sci. 14(3), 138-144.
  42. Siddiqui, K.M., Gladstone, W.T. and Marton, R. 1972 Influence of fertilisation on wood and pulp properties of Douglas fir. In Proceedings of the Symposium on the Effect of Growth Acceleration on the Properties of Wood. Madison, Wisconsin.
  43. Taylor, C.M.A. 1991 Forest fertilisation in Britain. Forestry Commission Bulletin 95. HMSO, London.
  44. Taylor, C.M.A. and Tabbush, P.M. 1990 Nitrogen deficiency in Sitka spruce plantations. Forestry Com- mission Bulletin 89. HMSO, London.
  45. Timell, T.E. 1986 Compression Wood in Gym- nosperms. Springer-Verlag, Berlin.
  46. Tranquart, V. 1995 Spiral grain in Sitka spruce (Picea sitchensis). Unpublished MSc thesis, Bangor Uni- versity.
  47. van Buijtenen, J.P. 1997 Marker aided selection for wood quality. In Timber Management Toward Wood Quality and End-Product Value. S.Y. Zhang, R. Gos- selin and G. Chauret (eds). Proceedings of the CTIA/IUFRO International Wood Quality Work- shop, Quebec City. Part IV, pp. 11-18.
  48. Watson, B. and Cameron, A 1995 Some effects of nursing species on stem form, branching habit and compression wood content of Sitka spruce. Scot. For. 49(3), 146-154.
  49. Yang, K.C. 1987 Wood properties, wood qualities and silvicultural treatments. Q. J. Chin. For. 20(2), 7-27.
  50. Zhang, S.Y. 1997 Wood quality: its definition, impact and implications for value-added timber manage- ment and end uses. In Timber Management Toward Wood Quality and End-Product Value. S.Y. Zhang, R. Gosselin and G. Chauret (eds). Proceedings of the CTIA/IUFRO International Wood Quality Work- shop, Quebec City. Part I, pp. 17-39.
  51. Zobel, B.J. and Jett, J.B. 1995 Genetics of Wood Pro- duction. Springer-Verlag, Berlin.
  52. Zobel, B.J. and Sprague, J.R. 1998 Juvenile Wood in Forest Trees. Springer-Verlag, Berlin.
  53. Zobel, B.J. and van Buijtenen, J.P. 1989 Wood Vari- ation: Its Causes and Control. Springer-Verlag, Berlin.

Cited by

Sorted by citations

Authors
Macdonald, E.
Affiliations
University of the Highlands and Islands (GB)
Corresponding author
Macdonald, E.
Venue
Forestry
Publisher
Oxford University Press (OUP)
Published
2002-02-01
Volume
75
Issue
2
Pages
107-138
ISSN
  • 0015-752X (ISSN-L)
  • 1464-3626
DOI
10.1093/forestry/75.2.107
OpenAlex
W2124296295
Cited by
264
References
0
Citations by year
2026: 9 · 2025: 8 · 2024: 11 · 2023: 11 · 2022: 13 · 2021: 13 · 2020: 18 · 2019: 16 · 2018: 15 · 2017: 14 · 2016: 6 · 2015: 14 · 2014: 10 · 2013: 22 · 2012: 9
FWCI
3.12
Type
journal article
Language
en
Open access
closed
Locations
Forestry An International Journal of Forest Research (publishedVersion)
Topics
  • Physical Sciences › Environmental Science › Nature and Landscape Conservation › Forest ecology and management
  • Physical Sciences › Environmental Science › Global and Planetary Change › Forest Management and Policy
  • Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
Keywords
Sitka spruce, wood quality, silviculture, sawlog production, knots, grain angle, wood density, tracheid length, microfibril angle, juvenile wood, compression wood, tree size, growth rate, stem straightness, stem taper, thinning, rotation length, initial spacing, site quality, genetic improvement, fiber products, forest certification

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review