Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.

4D spinless topological insulator in a periodic electric circuit

Open access
Yu, Rui, Zhao, Y X, Schnyder, Andreas P · 2020 · National Science Review

Abstract

According to the mathematical classification of topological band structures, there exist a number of fascinating topological states in dimensions larger than three with exotic boundary phenomena and interesting topological responses. While these topological states are not accessible in condensed matter systems, recent works have shown that synthetic systems, such as photonic crystals or electric circuits, can realize higher-dimensional band structures. Here, we argue that, because of its symmetry properties, the 4D spinless topological insulator is particularly well suited for implementation in these synthetic systems. We explicitly construct a 2D electric circuit lattice, whose resonance frequency spectrum simulates the 4D spinless topological insulator. We perform detailed numerical calculations of the circuit lattice and show that the resonance frequency spectrum exhibits pairs of 3D Weyl boundary states, a hallmark of the nontrivial topology. These pairs of 3D Weyl states with the same chirality are protected by classical time-reversal symmetry that squares to +1, which is inherent in the proposed circuit lattice. We also discuss how the simulated 4D topological band structure can be observed in experiments.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1093/nsr/nwaa065

Cites

61 of 61 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1. Topological properties of the 4D model Hamiltonian. (a) The second Chern number C2 as a function of m (in unit of t). For −t/2 < m < t, C2 = −2. (b) The band structures for a slab geometry confined in the }{}$\boldsymbol{r}_{1}$ direction, with m = 0. The k-line in the (k2, k3, k4) space is chosen to cross the point }{}$w$1 = 2π(5/12, 1/3, −1/3) along the k2 direction. The bulk part of the band structure (gray) is obtained by projecting the eigenvalues of the Hamiltonian (1) with k1 ∈ [0, 2π]. The boundary states (red lines) are the eigenstates of the boundary effective Hamiltonian (3) in the range of k2 ∈ 2π(1/3, 2/3), between the two vertical blue dashed lines. (c and d) The bulk band structures and the boundary Weyl states along the k3 and k4 directions, respectively. The boundary states appear in the whole range of k3, 4 ∈ [0, 2π]. The local band structure around the point }{}$w$2 is related to that around }{}$w$1 by time-reversal symmetry.
Figure 1. Topological properties of the 4D model Hamiltonian. (a) The second Chern number C2 as a function of m (in unit of t). For −t/2 < m < t, C2 = −2. (b) The band structures for a slab geometry confined in the }{}$\boldsymbol{r}_{1}$ direction, with m = 0. The k-line in the (k2, k3, k4) space is chosen to cross the point }{}$w$1 = 2π(5/12, 1/3, −1/3) along the k2 direction. The bulk part of the band structure (gray) is obtained by projecting the eigenvalues of the Hamiltonian (1) with k1 ∈ [0, 2π]. The boundary states (red lines) are the eigenstates of the boundary effective Hamiltonian (3) in the range of k2 ∈ 2π(1/3, 2/3), between the two vertical blue dashed lines. (c and d) The bulk band structures and the boundary Weyl states along the k3 and k4 directions, respectively. The boundary states appear in the whole range of k3, 4 ∈ [0, 2π]. The local band structure around the point }{}$w$2 is related to that around }{}$w$1 by time-reversal symmetry.CC BY · PubMed Central
Figure 2. The 4D circuit lattice realized on a 2D plane. (a), A 2D sub-circuit lattice containing 3 × 3 unit cells in a }{}$\boldsymbol{r}_{3}$-}{}$\boldsymbol{r}_{4}$ plane of the 4D circuit lattice, and (b and c) two basic components used in the 2D sub-circuit. In panel (a), the small dark blue rectangle exemplifies a unit cell consisting of four nodes, a, b, c, d, denoted by black dots. All nodes on the plane are labeled by αij, where α = a, b, c, d, and i (j) is the lattice index for the }{}$\boldsymbol{r}_{3}$ (}{}$\boldsymbol{r}_{4}$) direction. Each node in the plane is connected to ground through the component illustrated in panel (b), which contains a capacitor and an inductor connected in parallel. On the plane, within each unit cell, connections are made between a to b, b to c, c to d, and d to a. Node a (c) in each unit cell is connected to node b (d) in a neighbor cell if the two cells are separated by the vector (0,0,1,0) or (0,0,0,1) [(0, 0, −1, 0) or (0, 0, 0, −1)]. The two types of connections are indicated by solid and dashed red lines, respectively. As illustrated in panel (c), each solid (dashed) line indicates the component containing a capacitor with capacitance C (−C). The Born-von Karman periodic boundary conditions are implemented by connecting the nodes on the right (top) edge to the corresponding nodes on the left (bottom) edge. To facilitate the connections on the (}{}$\boldsymbol{r}_{1}$, }{}$\boldsymbol{r}_{2}$) plane, we connect all nodes to the black squares on the edges with the same indices by wires, which are not explicitly shown to make the figure neat. Moreover, black squares with the same label are equipotential. (d) The two-port sub-circuit as an effective capacitor with capacitance −C. A detailed derivation for this result is given in the Supplementary data. (e) The circuit lattice with 2 × 3 blocks in the }{}$\boldsymbol{r}_{1}$-}{}$\boldsymbol{r}_{2}$ plane. Here, each block is a copy of the 2D sub-circuit in panel (a), with the lattice indices on the }{}$\boldsymbol{r}_{1}$ and }{}$\boldsymbol{r}_{2}$ plane indicated at the center. Each a (b) node is connected to a d (c) node if they are separated by the vector (1,0,0,0) or (0,1,0,0), and each a (c) node is connected to another a (c) node if they are separated by (0, ±1, ±1, 0). The blue lines indicate wires, and the solid red lines are again specified in panel (c). In addition, wires are connected at a crossing point if it is marked as a blue square. Otherwise, they just go across each other without connection.
Figure 2. The 4D circuit lattice realized on a 2D plane. (a), A 2D sub-circuit lattice containing 3 × 3 unit cells in a }{}$\boldsymbol{r}_{3}$-}{}$\boldsymbol{r}_{4}$ plane of the 4D circuit lattice, and (b and c) two basic components used in the 2D sub-circuit. In panel (a), the small dark blue rectangle exemplifies a unit cell consisting of four nodes, a, b, c, d, denoted by black dots. All nodes on the plane are labeled by αij, where α = a, b, c, d, and i (j) is the lattice index for the }{}$\boldsymbol{r}_{3}$ (}{}$\boldsymbol{r}_{4}$) direction. Each node in the plane is connected to ground through the component illustrated in panel (b), which contains a capacitor and an inductor connected in parallel. On the plane, within each unit cell, connections are made between a to b, b to c, c to d, and d to a. Node a (c) in each unit cell is connected to node b (d) in a neighbor cell if the two cells are separated by the vector (0,0,1,0) or (0,0,0,1) [(0, 0, −1, 0) or (0, 0, 0, −1)]. The two types of connections are indicated by solid and dashed red lines, respectively. As illustrated in panel (c), each solid (dashed) line indicates the component containing a capacitor with capacitance C (−C). The Born-von Karman periodic boundary conditions are implemented by connecting the nodes on the right (top) edge to the corresponding nodes on the left (bottom) edge. To facilitate the connections on the (}{}$\boldsymbol{r}_{1}$, }{}$\boldsymbol{r}_{2}$) plane, we connect all nodes to the black squares on the edges with the same indices by wires, which are not explicitly shown to make the figure neat. Moreover, black squares with the same label are equipotential. (d) The two-port sub-circuit as an effective capacitor with capacitance −C. A detailed derivation for this result is given in the Supplementary data. (e) The circuit lattice with 2 × 3 blocks in the }{}$\boldsymbol{r}_{1}$-}{}$\boldsymbol{r}_{2}$ plane. Here, each block is a copy of the 2D sub-circuit in panel (a), with the lattice indices on the }{}$\boldsymbol{r}_{1}$ and }{}$\boldsymbol{r}_{2}$ plane indicated at the center. Each a (b) node is connected to a d (c) node if they are separated by the vector (1,0,0,0) or (0,1,0,0), and each a (c) node is connected to another a (c) node if they are separated by (0, ±1, ±1, 0). The blue lines indicate wires, and the solid red lines are again specified in panel (c). In addition, wires are connected at a crossing point if it is marked as a blue square. Otherwise, they just go across each other without connection.CC BY · PubMed Central
Figure 3. The band structures for the 4D circuit lattice with periodic boundary conditions (PBCs) and open boundary conditions (OBCs). For each figure, the results obtained from simulation are plotted by gray dots, while in comparison, those from the model Hamiltonian are presented by red dashed lines. (a and b) The bulk band structure along the k1 (k2) direction passing through the origin of the BZ for the PBCs. (c–h) The voltage intensities along various k-lines crossing one of the Weyl points, }{}$w$1, under the OBCs for the }{}$\boldsymbol{r}_{1}$-direction and PBCs for the other directions. In simulation, we assume nine layers for the }{}$\boldsymbol{r}_{1}$-direction. (c) The voltage intensity of the bottom four layers, contributed from all the four types of nodes, along the k2-direction. From the intensity distribution, we observe that the in-gap boundary Weyl states exist in the interval from k2 = 2π/3 to 4π/3, as marked by the two vertical (blue) lines. The simulation result agrees with the analytic result from the model Hamiltonian, particularly well in the interval. (d) The voltage intensity from the 5th layer to the top edge layer. The surface Weyl states disappear as the pulse source added on the bottom boundary cannot excite the surface Weyl states on the top boundary, demonstrating the local nature of the surface states. (e and f) The voltage intensities on the bottom four layers from the a, b and c, d nodes, respectively. The intensity appears to be dominated by the c and d components rather than the a and b components, consistent with the analytic result from the model Hamiltonian. (g and h) The band structures along k3 and k4 directions, respectively. The linear dispersion relations in the vicinity of the }{}$w$1 point along all directions on the boundary demonstrate that the }{}$w$1 point is a 3D Weyl point.
Figure 3. The band structures for the 4D circuit lattice with periodic boundary conditions (PBCs) and open boundary conditions (OBCs). For each figure, the results obtained from simulation are plotted by gray dots, while in comparison, those from the model Hamiltonian are presented by red dashed lines. (a and b) The bulk band structure along the k1 (k2) direction passing through the origin of the BZ for the PBCs. (c–h) The voltage intensities along various k-lines crossing one of the Weyl points, }{}$w$1, under the OBCs for the }{}$\boldsymbol{r}_{1}$-direction and PBCs for the other directions. In simulation, we assume nine layers for the }{}$\boldsymbol{r}_{1}$-direction. (c) The voltage intensity of the bottom four layers, contributed from all the four types of nodes, along the k2-direction. From the intensity distribution, we observe that the in-gap boundary Weyl states exist in the interval from k2 = 2π/3 to 4π/3, as marked by the two vertical (blue) lines. The simulation result agrees with the analytic result from the model Hamiltonian, particularly well in the interval. (d) The voltage intensity from the 5th layer to the top edge layer. The surface Weyl states disappear as the pulse source added on the bottom boundary cannot excite the surface Weyl states on the top boundary, demonstrating the local nature of the surface states. (e and f) The voltage intensities on the bottom four layers from the a, b and c, d nodes, respectively. The intensity appears to be dominated by the c and d components rather than the a and b components, consistent with the analytic result from the model Hamiltonian. (g and h) The band structures along k3 and k4 directions, respectively. The linear dispersion relations in the vicinity of the }{}$w$1 point along all directions on the boundary demonstrate that the }{}$w$1 point is a 3D Weyl point.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 61 references

Cited by

See all 106

Metadata

Authors
Yu, R., Zhao, Y. X., & Schnyder, A. P.
Affiliations
  • Wuhan University (CN)
  • Collaborative Innovation Center of Advanced Microstructures (CN)
  • Max Planck Institute for Solid State Research (DE)
Corresponding author
  • Yu, Rui
  • Zhao, Y X
Venue
National Science Review
Published
2020-04-15
Volume
7
Issue
8
Pages
1288-1295
ISSN
  • 2053-714X (ISSN-L)
  • 2095-5138
OpenAlex
W3016566822
Cited by
106
References
61
Citations by year
2026: 7 · 2025: 19 · 2024: 12 · 2023: 19 · 2022: 17 · 2021: 19 · 2020: 13
FWCI
6.91
Type
journal article
Language
en
Open access
Locations
  • National Science Review (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • arXiv (Cornell University)
Funders
  • National Key Research and Development Program of China (2017YFA0303402, 2017YFA0304700)
  • National Natural Science Foundation of China (11874048, 11674077)
  • Glaucoma Research Foundation (HKU 173057/17P)
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Topological Materials and Phenomena
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Advanced Condensed Matter Physics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Mechanics and Non-Hermitian Physics
Keywords
time-reversal symmetry, higher-dimensional topology, photonic crystals

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: 4D spinless topological insulator in a periodic electric circuit. https://app.cochat.ai/papers/10.1093/nsr/nwaa065
The paper
Yu, R., Zhao, Y. X., & Schnyder, A. P. (2020). 4D spinless topological insulator in a periodic electric circuit. National Science Review. https://doi.org/10.1093/nsr/nwaa065

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.