The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mass production of 2D materials by intermediate-assisted grinding exfoliation
Open accessAbstract
The scalable and high-efficiency production of 2D materials is a prerequisite to their commercial use. Currently, only graphene and graphene oxide can be produced on a ton scale, and the inability to produce other 2D materials on such a large scale hinders their technological applications. Here we report a grinding exfoliation method that uses micro-particles as force intermediates to resolve applied compressive forces into a multitude of small shear forces, inducing the highly efficient exfoliation of layer materials. The method, referred to as intermediate-assisted grinding exfoliation (iMAGE), can be used for the large-scale production of many 2D materials. As an example, we have exfoliated bulk h-BN into 2D h-BN with large flake sizes, high quality and structural integrity, with a high exfoliation yield of 67%, a high production rate of 0.3 g h−1 and a low energy consumption of 3.01 × 106 J g−1. The production rate and energy consumption are one to two orders of magnitude better than previous results. Besides h-BN, this iMAGE technology has been used to exfoliate various layer materials such as graphite, black phosphorus, transition metal dichalcogenides, and metal oxides, proving its universality. Molybdenite concentrate, a natural low-cost and abundant mineral, was used as a demo for the large-scale exfoliation production of 2D MoS2 flakes. Our work indicates the huge potential of the iMAGE method to produce large amounts of various 2D materials, which paves the way for their commercial application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Mounet, N., Gibertini, M., Schwaller, P., Campi, D., Merkys, A., Marrazzo, A., Sohier, T., Castelli, I. E., Cepellotti, A., Pizzi, G., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-017-0035-5 · Cited by 1,863
Luo, Y., Tang, L., Khan, U., Yu, Q., Cheng, H.-M., Zou, X., & Liu, B. (2019) · Nature Communications · doi:10.1038/s41467-018-07792-9 · Cited by 713 · cited 4×
“[11] As for the chemical synthesis strategy, solvothermal treatment has been used to synthesize different kinds of 2D materials including not only TMDCs[12] but also even hard-for-CVD-synthesised MxOy[13] and b-P[14], however, the quantity is still small.”
MethodInfluentialSelf-citation
Cited by
Structure, Properties and Applications of Two‐Dimensional Hexagonal Boron Nitride
Roy, S., Zhang, X., Puthirath, A. B., Meiyazhagan, A., Bhattacharyya, S., Rahman, M. M., Babu, G., Susarla, S., Saju, S. K., Tran, M. K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101589 · Cited by 871
Tang, L., Tan, J., Nong, H., Liu, B., & Cheng, H.-M. (2021) · Accounts of Materials Research · doi:10.1021/accountsmr.0c00063 · Cited by 271
Self-citationZhang, C., Luo, Y., Tan, J., Yu, Q., Yang, F., Zhang, Z., Yang, L., Cheng, H.-M., & Liu, B. (2020) · Nature Communications · doi:10.1038/s41467-020-17121-8 · Cited by 266
Self-citation
Metadata
- Authors
- Zhang, C., Tan, J., Pan, Y., Cai, X., Zou, X., Cheng, H.-M., & Liu, B.
- Venue
- National Science Review
- Publisher
- Oxford University Press (OUP)
- Published
- 2019-10-21
- Volume
- 7
- Issue
- 2
- Pages
- 324-332
- ISSN
- 2053-714X (ISSN-L)
- 2095-5138
- OpenAlex
- W2981699736
- Cited by
- 167
- References
- 3
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mass production of 2D materials by intermediate-assisted grinding exfoliation. https://app.cochat.ai/papers/10.1093/nsr/nwz156
- The paper
- Zhang, C., Tan, J., Pan, Y., Cai, X., Zou, X., Cheng, H.-M., & Liu, B. (2020). Mass production of 2D materials by intermediate-assisted grinding exfoliation. National Science Review. https://doi.org/10.1093/nsr/nwz156
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.