Physical Properties of Poly(Lactic Acid) and Starch Composites with Various Blending Ratios
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Two‐phase polymer blends of poly(lactic acid) (PLA) and corn or wheat starches at various ratios were prepared by using a laboratory‐scale twin‐screw extruder and compression molding. The blends were characterized for thermal transitions, mechanical properties, and water absorption. Starch and PLA were immiscible polymers, and the thermal behavior of PLA was not affected by starch. Crystallinity of the blends decreased in some degree as starch content increased 20–40%. Tensile strength and elongation of the blends decreased as starch content increased, but modulus increased as starch content increased up to 70%. As starch content increased to >60%, the PLA phase became discontinuous, and water absorption of the blends increased sharply. Blends made from wheat starch gave slightly better mechanical properties than those made from corn starch, and no differences in other properties were observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Biodegradable blends and composites of polycaprolactone and starch derivatives
Koenig, M. F., & Huang, S. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90934-t · Cited by 336
Cited by
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Biodegradable films and composite coatings: past, present and future
Tharanathan, R. N. (2003) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(02)00280-7 · Cited by 1,243
Advances in Edible Coatings for Fresh Fruits and Vegetables: A Review
Dhall, R. K. (2013) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.541568 · Cited by 884
Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride
Zhang, J.-F., & Sun, X. (2004) · Biomacromolecules · doi:10.1021/bm0400022 · Cited by 494
Self-citationRecent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Metadata
- Authors
- Ke, T., & Sun, X.
- Venue
- Cereal Chemistry
- Publisher
- Wiley
- Published
- 2000-11
- Volume
- 77
- Issue
- 6
- Pages
- 761-768
- ISSN
- 0009-0352 (ISSN-L)
- 1943-3638
- OpenAlex
- W2005041161
- Cited by
- 156
- References
- 2
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.