The theory of wedge indentation of ductile materials
The DOI matches its Crossref record.
Abstract
The theoretical solution for the deformation produced by a rigid frictionless wedge penetrating a plastic material is presented in this paper. The solution determines the form of the lip and the deformation in the material squeezed out towards the surface. The variation with wedge angle of the force required for penetration is determined in terms of the yield stress in a tensile test. The deformation of a grid of squares on a plane normal to the axis of the wedge is shown in figure 9 for a 30° semi-angle wedge. Close agreement is obtained with experiments as shown by comparing figure 9 with the photographs in figure 10 (plate 4). Lead blocks were used with a grid of squares scribed before penetration. This investigation is a first step towards the correlation of hardness test results with the deformation properties of a material under other conditions of stress, e.g. the tensile test. The average strain due to wedge indentation is shown to correspond to an equivalent reduction of area in a tensile test which increases with increasing wedge angle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microwedge Machining for the Manufacture of Directional Dry Adhesives
Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M. (2013) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4023161 · Cited by 112
“The process bears resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to…”
Background
Metadata
- Authors
- Hill, R., Lee, E. H., & Tupper, S. J.
- Venue
- Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1947-01-30
- Volume
- 188
- Issue
- 1013
- Pages
- 273-289
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W2056204039
- Cited by
- 242
- References
- 0
- FWCI
- 28.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The theory of wedge indentation of ductile materials. https://app.cochat.ai/papers/10.1098/rspa.1947.0009
- The paper
- Hill, R., Lee, E. H., & Tupper, S. J. (1947). The theory of wedge indentation of ductile materials. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. https://doi.org/10.1098/rspa.1947.0009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.