The DOI matches its Crossref record; 44 of the 46 references it cites were found in a registry or an index.
Microwedge Machining for the Manufacture of Directional Dry Adhesives
Abstract
Directional dry adhesives are inspired by animals such as geckos and are a particularly useful technology for climbing applications. Previously, they have generally been manufactured using photolithographic processes. This paper presents a micromachining process that involves making cuts in a soft material using a sharp, lubricated tool to create closely spaced negative cavities of a desired shape. The machined material becomes a mold into which an elastomer is cast to create the directional adhesive. The trajectory of the tool can be varied to avoid plastic flow of the mold material that may adversely affect adjacent cavities. The relationship between tool trajectory and resulting cavity shape is established through modeling and process characterization experiments. This micromachining process is much less expensive than previous photolithographic processes used to create similar features and allows greater flexibility with respect to the microscale feature geometry, mold size, and mold material. The micromachining process produces controllable, directional adhesives, where the normal adhesion increases with shear loading in a preferred direction. This is verified by multi-axis force testing on a flat glass substrate. Upon application of a post-treatment to decrease the roughness of the engaging surfaces of the features after casting, the adhesives significantly outperform comparable directional adhesives made from a photolithographic mold.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adhesive chosen for this task consists of polydimethylsiloxane (PDMS) slanted microwedges (roughly 100 mm tall), which adhere well to glass and can be repositioned many times without degradation [4,5]”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
In the citing paper
“While other dry adhesive materials produce larger adhesive stresses, PDMS microwedges are especially suitable for climbing because they exhibit controllable adhesion that can be effectively switched on or off in a fraction of a second by applying a shear stress.”
From Human climbing with efficiently scaled gecko-inspired dry adhesives (2015) · cites this paper as [4]
Citations
Cites
The Mathematical Theory Of Plasticity
Hill, R. (1998) · doi:10.1093/oso/9780198503675.001.0001 · Cited by 7,830
Petry, F. E. (1997) · Kluwer Academic Publishers eBooks · Cited by 2,303
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949 · cited 1×
“Machining processes have been used previously to create stamps for soft lithography [27] and synthetic adhesive structures [11, 28] using nano-indenters and AFM tips, but neither fabrication nor testing of macroscopic adhesive arrays (∼ 1 cm) has been demonstrated and the aspect ratio of the resulting features has bee…”
MethodSpringer Handbook of Nanotechnology
(2010) · Springer Handbooks · doi:10.1007/978-3-642-02525-9 · Cited by 1,473
Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707586 · Cited by 1,318 · cited 1×
“In the second case, the plastic region is restricted to a single shear plane, and elsewhere the material is rigid, in a similar manner to the Merchant model of orthogonal machining [32, 33].”
ResultPrinciples and applications of tribology
(2013) · Choice Reviews Online · doi:10.5860/choice.51-0907 · Cited by 856
Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707596 · Cited by 768 · cited 2×
“…resemblance to two classical problems from plane-strain plasticity theory: oblique wedge indenting [29,30], in which a rigid wedge-shaped tool penetrates the work surface, and orthogonal machining [31–33], in which the tool removes a thin strip of material by moving parallel to the work surface.”
BackgroundResultCarbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-Off
Qu, L., Dai, L., Stone, M., Xia, Z., & Wang, Z. L. (2008) · Science · doi:10.1126/science.1159503 · Cited by 745 · cited 1×
“Controllability can be achieved by using switchable structures [9,10] or by creating directional adhesive features whose adhesion generation is a function of applied shear load [11–24].”
BackgroundSmooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661 · cited 1×
“However, the use of such adhesives in applications such as climbing has been much more limited, with just a few examples reported [2–8].”
BackgroundSelf-citationFrictional adhesion: a new angle on gecko attachment
Autumn, K., Dittmore, A., Santos, D., Spenko, M., & Cutkosky, M. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02486 · Cited by 651 · cited 2×
“Whether post-treated or not, the micro-machined adhe-sives are controllable because they have the property of frictional adhesion [12]: the adhesion increases as the shear load increases, and the adhesion goes to zero as the shear load is removed because the limit curve goes through the origin.”
BackgroundResultSelf-citation
Research works printed but not linked: 3
- 1941, Chip Formation, Friction and High Quality Machined Surfaces, 299
- 1957, The Use of Paraffin Wax as a Model Material to Simulate the Plastic Deformation of Metals, J. Iron Steel Inst., London, 185, 375
- 1973, Engineering Plasticity
Cited by
A Soft Robotic Gripper With Gecko-Inspired Adhesive
Glick, P., Suresh, S. A., Ruffatto, D., Cutkosky, M., Tolley, M. T., & Parness, A. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792688 · Cited by 381
Self-citationJiang, H., Hawkes, E. W., Fuller, C., Estrada, M. A., Suresh, S. A., Abcouwer, N., Han, A. K., Wang, S., Ploch, C. J., Parness, A., et al. (2017) · Science Robotics · doi:10.1126/scirobotics.aan4545 · Cited by 337
“The microwedge shapes are formed by creating a mold in soft wax and then cast onto a prepared backing, using the process detailed in (46) and (47).”
MethodSelf-citationA Survey on Load Transportation Using Multirotor UAVs
Villa, D. K. D., Brandão, A. S., & Sarcinelli-Filho, M. (2020) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-019-01088-w · Cited by 247
“To adhere into smooth surfaces, the FlyCroTugs uses a square 25-by-25 mm 2 pad of directional gecko-like dry adhesives [85], capable of generating shear forces up to 45 N in that surfaces.”
MethodEngineering Micropatterned Dry Adhesives: From Contact Theory to Handling Applications
Hensel, R., Moh, K., & Arzt, E. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800865 · Cited by 195
From grasping to manipulation with gecko-inspired adhesives on a multifinger gripper
Ruotolo, W., Brouwer, D., & Cutkosky, M. R. (2021) · Science Robotics · doi:10.1126/scirobotics.abi9773 · Cited by 162
“2 of 13 The adhesives used for testing consist of a directional, microwedge design as presented in (21)—but our purpose is to address the hand design considerations necessary for efficient use of any directional adhesive, independent of the material properties and force limits of that particular implementation.”
MethodSelf-citation
Metadata
- Authors
- Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M.
- Affiliations
- Los Alamos National Laboratory (US)
- Stanford University (US)
- e-mail:
- Corresponding author
- Day, Paul
- Eason, Eric V.
- Christensen, David
- Cutkosky, Mark
- ORCID
- Cutkosky, Mark
- Venue
- Journal of Micro and Nano-Manufacturing
- Publisher
- ASME International
- Published
- 2013-03-01
- Volume
- 1
- Issue
- 1
- ISSN
- 2166-0468 (ISSN-L)
- 2166-0476
- OpenAlex
- W2125778968
- Cited by
- 112
- References
- 46
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 7 · 2023: 10 · 2022: 9 · 2021: 17 · 2020: 7 · 2019: 13 · 2018: 7 · 2017: 9 · 2016: 6 · 2015: 9 · 2014: 4 · 2013: 4
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Micro and Nano-Manufacturing (publishedVersion)
- Funders
- National Science Foundation
- Hertz Foundation
- Defense Advanced Research Projects Agency
- Los Alamos National Laboratory
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Keywords
- micromachining, mold making, cavity geometry, tool trajectory, gecko-inspired adhesion, shear adhesion, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microwedge Machining for the Manufacture of Directional Dry Adhesives. https://app.cochat.ai/papers/10.1115/1.4023161
- The paper
- Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M. (2013). Microwedge Machining for the Manufacture of Directional Dry Adhesives. Journal of Micro and Nano-Manufacturing. https://doi.org/10.1115/1.4023161
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.