The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A mechanism for the control of crack propagation in all-brittle systems
Abstract
The stress distribution close to the tip of a crack which has a finite tip radius and which is being opened either by means of a remotely applied tension field σy, 0 or by means of a concentrated force (e. g. a wedge driven into the crack) has been computed. It is shown that there exist tensile stresses (σx) parallel to the plane of the crack and ahead of the crack tip. The maximum value of the tension σx is an approximately constant fraction (~ 1/5) of the peak stress concentration σy, max. which usually causes crack propagation. Inside a brittle solid, if a plane of weakness or potential cleavage is present and is roughly normal to the plane of the original crack, this interface may break and produce a secondary crack in such a manner as to interfere with the progress of the primary crack. If the ratio of the adhesive strength of the interface to the general cohesive strength of the solid is in the right range large increases in the strength and toughness of otherwise brittle solids may result.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Stresses in a plate due to the presence of cracks and sharp corners
Inglis, C. E. (1913) · Medical Entomology and Zoology · Cited by 1,087
Cited by
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
The mechanical design of nacre
Jackson, A. P., Vincent, J. F. V., & Turner, R. M. (1988) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1988.0056 · Cited by 1,269
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Wang, B., Yang, W., McKittrick, J., & Meyers, M. A. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.06.001 · Cited by 873
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
“One prominent process is the Cook–Gordon mechanism of crack blunting [192].”
BackgroundStructure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Mechanical properties of mother of pearl in tension
Currey, J. D. (1977) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1977.0050 · Cited by 722
Brown, M. (1994) · Earth-Science Reviews · doi:10.1016/0012-8252(94)90009-4 · Cited by 618
The true toughness of human cortical bone measured with realistically short cracks
Koester, K. J., Ager, J. W., & Ritchie, R. O. (2008) · Nature Materials · doi:10.1038/nmat2221 · Cited by 558
Dental Functional Morphology: How Teeth Work
Lucas, P. W. (2004) · doi:10.1017/cbo9780511735011 · Cited by 550
Cotterell, B., & Kamminga, J. (1987) · American Antiquity · doi:10.2307/281378 · Cited by 349
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
The effect of acetylation on interfacial shear strength between plant fibres and various matrices
Khalil, H. P. S. A., Ismail, H., Rozman, H. D., & Ahmad, M. N. (2001) · European Polymer Journal · doi:10.1016/s0014-3057(00)00199-3 · Cited by 299
Deflection of dykes into sills at discontinuities and magma-chamber formation
Gudmundsson, A. (2011) · Tectonophysics · doi:10.1016/j.tecto.2009.10.015 · Cited by 286
Hill, C. A. S., & Abdul Khalil, H. P. S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001128)78:9<1685::aid-app150>3.0.co;2-u · Cited by 263
Timber—a review of the structure‐mechanical property relationship
Dinwoodie, J. M. (1975) · Journal of Microscopy · doi:10.1111/j.1365-2818.1975.tb04002.x · Cited by 117
Metadata
- Authors
- Cook, J., & Gordon, J. E.
- Venue
- Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1964-12-08
- Volume
- 282
- Issue
- 1391
- Pages
- 508-520
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W1998699977
- Cited by
- 779
- References
- 2
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.