The DOI matches its Crossref record.
Mechanics of adhesive failure. II
Abstract
In the preceding Part I of this investigation a relation was derived among the measured failure energy, θ, the energy dissipated viscoelastically during joint separation, and an intrinsic failure energy θ0, for various rubber-to-polymer substrate joints. For some joints, θ0 was equal to the thermodynamic work of adhesion WA, but for others θ0 ≫ WA. By the use of a variety of microscopical and spectroscopical techniques it is shown in the present paper that when θ0 ≈ WA, joint failure is wholly interfacial, but that θ0 ≫ WA when substantial cohesive failure occurs during joint separation. It is shown that the intrinsic failure energy (which controls the total failure energy under given conditions) may be expressed as θ0 = iI + rJ0 + 8F, where i, r and s are the area fractions of interfacial failure, rubber cohesive failure and substrate cohesive failure respectively and I, J0 and F are the corresponding failure energies (per area). For purely interfacial failure, i = 1 and I = WA. For strong joints, however, about 70 to 80 % of the value of θ0 is provided by the term rJ0. The departures from interfacial failure, which occur only with etch-treated substrate films, can be attributed to covalent bonding across the interface during cure of the elastomer. The reactive groups in the substrate are C=C double bonds produced by the etching treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
Surface energy, surface topography and adhesion
Packham, D. E. (2003) · International Journal of Adhesion and Adhesives · doi:10.1016/s0143-7496(03)00068-x · Cited by 595
Adhesion phenomena in bonded joints
Baldan, A. (2012) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2012.04.007 · Cited by 531
The science of adhesion: Part 1 Surface and interfacial aspects
Kinloch, A. J. (1980) · Journal of Materials Science · doi:10.1007/bf00552302 · Cited by 484
Self-citationNetwork Formation and Physical Properties of Epoxy Resins for Future Practical Applications
Shundo, A., Yamamoto, S., & Tanaka, K. (2022) · JACS Au · doi:10.1021/jacsau.2c00120 · Cited by 387
Mechanics of adhesive failure. I
Andrews, E. H., & Kinloch, A. J. (1973) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1973.0032 · Cited by 291
Self-citationThe science of adhesion: Part 2 Mechanics and mechanisms of failure
Kinloch, A. J. (1982) · Journal of Materials Science · doi:10.1007/bf00540361 · Cited by 265
Self-citationCrack blunting and the strength of soft elastic solids
Hui, C.-Y., A., J., Bennison, S. J., & Londono, J. D. (2003) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2002.1057 · Cited by 257
Metadata
- Authors
- Andrews, E. H., & Kinloch, A. J.
- Venue
- Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1973-03-27
- Volume
- 332
- Issue
- 1590
- Pages
- 401-414
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W2161277553
- Cited by
- 183
- References
- 0
- FWCI
- 9.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.