The DOI matches its Crossref record.
An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface
Abstract
The flow of fluid associated with the impact of water drops of radius R at a speed V onto unyielding dry metal surfaces of known roughness Ra is described. Spatial dimensions of the deforming drop are normalized by transformations of the kind x' — x/R, and time scales are normalized according to t' = tV/R, to permit comparison of events where or differ. It is shown that the primary influence of the surface roughness parameter Ra is the determination of the condition for the ejection of secondary droplets by the excitation of an instability in the developing watersheet; provided Ra≪ R, it is possible to evaluate the condition to a high degree of accuracy, and for Ra = 0.84 μm it is found to be α4/3RV1.69 > 7.4, where α is the eccentricity of the drop at the moment of impact. Deceleration of the drop apex does not commence until > 0.6, contrary to the prediction of Engel (1955) but in good agreement with that of Savic & Boult (1957). Close examination of the very early stages of impact suggests strongly that the so-called watersheet originates at a moment t' — 0.01 after first contact, regardless of the absolute values of R, V or Ra; the initial normalized watersheet velocity is of order 5. Where there is ejected material, its normalized velocity at the moment of ejection is of the order of 20 % greater than that of the watersheet substrate. Simple calculations also suggest that initial fluid velocities greater than 10 are required immediately before the initiation of the watersheet (t'< 0.01). Impacts at speeds considerably greater than the appropriate terminal fall speed in air show no deviations in character from those investigated at much lower speeds. A simple subsidiary experiment also suggests that greater impact velocities are required to produce splashing on inclined targets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…
Yarin, A. L. (2006) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.38.050304.092144 · Cited by 2,677
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Drop Impact on a Solid Surface
Josserand, C., & Thoroddsen, S. T. (2016) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-122414-034401 · Cited by 1,579
Time evolution of liquid drop impact onto solid, dry surfaces
Rioboo, R., Marengo, M., & Tropea, C. (2002) · Experiments in Fluids · doi:10.1007/s00348-002-0431-x · Cited by 937
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model
O'Rourke, P. J., & Amsden, A. A. (2000) · SAE Technical Paper Series · doi:10.4271/2000-01-0271 · Cited by 651
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Aussillous, P., & Quéré, D. (2006) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2005.1581 · Cited by 467
Drop impact and wettability: From hydrophilic to superhydrophobic surfaces
Antonini, C., Amirfazli, A., & Marengo, M. (2012) · Physics of Fluids · doi:10.1063/1.4757122 · Cited by 400
Review of MXene electrochemical microsupercapacitors
Jiang, Q., Lei, Y., Liang, H., Xi, K., Xia, C., & Alshareef, H. N. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.01.018 · Cited by 397
Droplet splashing on a thin liquid film
Josserand, C., & Zaleski, S. (2003) · Physics of Fluids · doi:10.1063/1.1572815 · Cited by 396
Modeling the splash of a droplet impacting a solid surface
Bussmann, M., Chandra, S., & Mostaghimi, J. (2000) · Physics of Fluids · doi:10.1063/1.1321258 · Cited by 381
On the spreading of impacting drops
Wildeman, S., Visser, C. W., Sun, C., & Lohse, D. (2016) · Journal of Fluid Mechanics · doi:10.1017/jfm.2016.584 · Cited by 371
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Precursors to Splashing of Liquid Droplets on a Solid Surface
Mandre, S., Mani, M., & Brenner, M. P. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.134502 · Cited by 282
Dynamics of droplet impact on solid surface with different roughness
Tang, C., Qin, M., Weng, X., Zhang, X., Zhang, P., Li, J., & Huang, Z. (2017) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2017.07.002 · Cited by 264
Modeling Fuel Film Formation and Wall Interaction in Diesel Engines
Stanton, D. W., & Rutland, C. J. (1996) · SAE Technical Paper Series · doi:10.4271/960628 · Cited by 263
Light to Shape the Future: From Photolithography to 4D Printing
del Barrio, J., & Sánchez‐Somolinos, C. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900598 · Cited by 258
The splash/non-splash boundary upon a dry surface and thin fluid film
Wal, R. L. V., Berger, G. M., & Mozes, S. D. (2006) · Experiments in Fluids · doi:10.1007/s00348-005-0045-1 · Cited by 255
Metadata
- Authors
- Stow, C. D., & Hadfield, M. G.
- Venue
- Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1981-01-07
- Volume
- 373
- Issue
- 1755
- Pages
- 419-441
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W1993383901
- Cited by
- 530
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.