The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
Abstract
In this paper, we examine prospects for the manufacture of patient-specific biomedical implants replacing hard tissues (bone), particularly knee and hip stems and large bone (femoral) intramedullary rods, using additive manufacturing (AM) by electron beam melting (EBM). Of particular interest is the fabrication of complex functional (biocompatible) mesh arrays. Mesh elements or unit cells can be divided into different regions in order to use different cell designs in different areas of the component to produce various or continually varying (functionally graded) mesh densities. Numerous design elements have been used to fabricate prototypes by AM using EBM of Ti-6Al-4V powders, where the densities have been compared with the elastic (Young) moduli determined by resonant frequency and damping analysis. Density optimization at the bone–implant interface can allow for bone ingrowth and cementless implant components. Computerized tomography (CT) scans of metal (aluminium alloy) foam have also allowed for the building of Ti-6Al-4V foams by embedding the digital-layered scans in computer-aided design or software models for EBM. Variations in mesh complexity and especially strut (or truss) dimensions alter the cooling and solidification rate, which alters the α -phase (hexagonal close-packed) microstructure by creating mixtures of α / α ′ (martensite) observed by optical and electron metallography. Microindentation hardness measurements are characteristic of these microstructures and microstructure mixtures ( α / α ′) and sizes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Brunette, D. M., Tengvall, P., Textor, M., & Thomsen, P. (2001) · Engineering Materials · doi:10.1007/978-3-642-56486-4 · Cited by 1,547
Bones: Structure and Mechanics
Currey, J. D. (2002) · Cited by 1,125
Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial
Bobyn, J. D., Stackpool, G. J., Hacking, S. A., Tanzer, M., & Krygier, J. J. (1999) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.81b5.0810907 · Cited by 1,037
Bones: Structure and Mechanics
Currey, J. D. (2002) · Princeton University Press eBooks · doi:10.1515/9781400849505 · Cited by 1,000
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Self-citationPorous Metals and Metallic Foams: Current Status and Recent Developments
Lefebvre, L. ‐., Banhart, J., & Dunand, D. C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800241 · Cited by 846
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Self-citationMechanical Behavior of Metallic Foams
Gibson, L. J. (2000) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.30.1.191 · Cited by 516
Advanced metal powder based manufacturing of complex components by electron beam melting
Gaytan, S. M., Murr, L. E., Medina, F. R., et al. (2009) · Materials Technology · doi:10.1179/106678509x12475882446133 · Cited by 211
Self-citationNovel titanium foam for bone tissue engineering
Wen, C. E., Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., & Mabuchi, M. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0382 · Cited by 210
Macropore tissue ingrowth: a quantitative and qualitative study on hydroxyapatite ceramic
van Blitterswijk, C. A., Grote, J. J., Kuijpers, W., Daems, W. T., & de Groot, K. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90071-2 · Cited by 198
Anisotropic yield behavior of bone under combined axial force and torque
Cezayirlioglu, H., Bahniuk, E., Davy, D. T., & Heiple, K. G. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90045-4 · Cited by 164 · cited 1×
“1.5 g cm−3) (Cezayirlioglu et al. 1985; Currey 2002), using the MATERIALISE dode-thin element (figures 5a and 7).”
MethodInfluentialSchliephake, H., Neukam, F. W., & Klosa, D. (1991) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/s0901-5027(05)80698-8 · Cited by 126
Cited by
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Self-citationThompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Metadata
- Authors
- Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., & Bracke, J.
- Venue
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2010-04-28
- Volume
- 368
- Issue
- 1917
- Pages
- 1999-2032
- ISSN
- 1364-503X (ISSN-L)
- 1471-2962
- OpenAlex
- W2036352099
- Cited by
- 636
- References
- 17
- FWCI
- 23.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.