CoChat

Conformations of a highly expressed Z19 α-zein studied with AlphaFold2 and MD simulations

Open access
Christensen, Niels Johan · 2023 · PLoS ONE

Preprint — published as 10.1371/journal.pone.0293786

The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.

Abstract

α-zeins are amphiphilic maize proteins with interesting material properties suitable for numerous applications, e.g., in renewable plastics, foods, therapeutics and additive manufacturing (3D-printing). To exploit their full potential, molecular-level insights are essential. Since α-zeins have resisted experimental atomic-resolution characterization, molecular models have been central to elucidating their structure, but deep-learning α-zein models are largely unexplored. Therefore, this work studies an AlphaFold2 model of a highly expressed zein with molecular dynamics (MD) simulations. The mature protein sequence of the α-zein cZ19C2 gave a loosely packed model with 7 α-helical segments connected by turns/loops and 68% total α-helicity. Compact tertiary structure was limited to a C-terminal bundle of three α-helices, each aligning well with the published repeat sequence NPAAYLQQQQLLPFNQLA(V/A)(L/A). The model was subjected to MD simulations in water containing 0, 3, 23, 50, and 100 mol% ethanol for 400 ns, with extension of selected simulations to the μs timescale. Although the simulations gave structurally diverse endpoints, several patterns were observed: In water and ≤ 2 mol% ethanol, the model rapidly formed compact globular structures, largely preserving the C-terminal bundle. At ≥ 50 mol% ethanol, extended conformations prevailed, consistent with previous SAXS studies. Tertiary structure was partially stabilized in water and in 2 mol% and 23 mol% ethanol, but was disrupted in ≥ 50 mol% ethanol. Averaged results indicated slightly increased helicity with ethanol concentration. Multiple copies of a globular model conformation rapidly formed branched aggregates in aqueous all-atom and coarse-grained MD simulations. β-sheet content was typically <1% across all simulations. In aqueous simulations with glycidyl methacrylate (GMA), 55% of GMA was found within 4 Å of the model. Pre-reaction complexes for methacrylation were indicated by GMA epoxide carbons within 2.9 – 3.3 Å of side chain hydroxyl oxygens, suggesting accessibility of reactive sites in compact α-zein conformations.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1101/2023.10.20.563246

Cites

89 of 89 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig 1 Topological tree for α-zein protein sequences. Zein names are from the studies [23, 29, 30]. UniProtKB IDs are given in brackets. Expressed sequence tag (EST) percentages are given for the three most expressed randomly chosen clones in B73 endosperm [30]. The cZ19C2 zein studied here is indicated by a grey background. The tree excludes signal peptides. The tree was built with MEGA11 [32] using a multiple sequence alignment of the mature α-zein sequences carried out with the integrated CLUSTAL W [33]. The Maximum Likelihood method and the JTT matrix-based model were used to infer the evolutionary history [34]. The tree with the highest log likelihood (-2686.46) is shown. The initial tree(s) for the heuristic search were automatically obtained using the Neighbor-Join and BioNJ algorithms on a pairwise distance matrix estimated with the JTT model. The topology with the highest log likelihood value was selected. This analysis included 17 amino acid sequences, with a total of 276 positions in the final dataset. Branch lines do not scale with branch lengths; however, the branch lengths, measured in the number of substitutions per site, are displayed next to the branches.
Fig 1 Topological tree for α-zein protein sequences. Zein names are from the studies [23, 29, 30]. UniProtKB IDs are given in brackets. Expressed sequence tag (EST) percentages are given for the three most expressed randomly chosen clones in B73 endosperm [30]. The cZ19C2 zein studied here is indicated by a grey background. The tree excludes signal peptides. The tree was built with MEGA11 [32] using a multiple sequence alignment of the mature α-zein sequences carried out with the integrated CLUSTAL W [33]. The Maximum Likelihood method and the JTT matrix-based model were used to infer the evolutionary history [34]. The tree with the highest log likelihood (-2686.46) is shown. The initial tree(s) for the heuristic search were automatically obtained using the Neighbor-Join and BioNJ algorithms on a pairwise distance matrix estimated with the JTT model. The topology with the highest log likelihood value was selected. This analysis included 17 amino acid sequences, with a total of 276 positions in the final dataset. Branch lines do not scale with branch lengths; however, the branch lengths, measured in the number of substitutions per site, are displayed next to the branches.CC BY · PubMed Central
Fig 2 Overall α-zein sequence organization. As an example, the segmentation of gZ19AB1 [28] is indicated by residue numbers. Numbers in brackets exclude the signal peptide.
Fig 2 Overall α-zein sequence organization. As an example, the segmentation of gZ19AB1 [28] is indicated by residue numbers. Numbers in brackets exclude the signal peptide.CC BY · PubMed Central
Fig 3 Consensus sequence comparison and AlphaFold2 model. A: Qualitative consensus sequence alignment. Top row (grey background) is the consensus repeat sequence by Geraghty et al.[25] The other rows contain the mature protein sequence of cZ19C2 (UniProtKB ID: P06677) manually aligned with the consensus repeat sequence in segments of up to 20 amino acids. Green background indicates amino acids matching the consensus sequence. Black background indicates gaps. B: AlphaFold2 model. Residues corresponding to the first amino acid of each row in (A) are indicated by black labels. The α-helices I–VII are annotated in purple. Gln and Asn are shown in green and orange stick representation, respectively. The protein backbone is shown as ribbons coloured by secondary structure. α-carbons are shown as spheres coloured by sequence position (red: N-terminal, blue: C-terminal). C: pLDDT scores indicated by ribbon colour. D: Predicted aligned error (PAE) matrix.
Fig 3 Consensus sequence comparison and AlphaFold2 model. A: Qualitative consensus sequence alignment. Top row (grey background) is the consensus repeat sequence by Geraghty et al.[25] The other rows contain the mature protein sequence of cZ19C2 (UniProtKB ID: P06677) manually aligned with the consensus repeat sequence in segments of up to 20 amino acids. Green background indicates amino acids matching the consensus sequence. Black background indicates gaps. B: AlphaFold2 model. Residues corresponding to the first amino acid of each row in (A) are indicated by black labels. The α-helices I–VII are annotated in purple. Gln and Asn are shown in green and orange stick representation, respectively. The protein backbone is shown as ribbons coloured by secondary structure. α-carbons are shown as spheres coloured by sequence position (red: N-terminal, blue: C-terminal). C: pLDDT scores indicated by ribbon colour. D: Predicted aligned error (PAE) matrix.CC BY · PubMed Central
Fig 4 Snapshots from 400 ns MD simulations in 100 mol% water. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 4 Snapshots from 400 ns MD simulations in 100 mol% water. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 5 Snapshots from 400 ns MD simulations in 2 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 5 Snapshots from 400 ns MD simulations in 2 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 6 Snapshots from 400 ns MD simulations in 23 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 6 Snapshots from 400 ns MD simulations in 23 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 7 Snapshots from 400 ns MD simulations in 50 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 7 Snapshots from 400 ns MD simulations in 50 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 8 Snapshots from 400 ns MD simulations in 100 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each 400 ns simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 8 Snapshots from 400 ns MD simulations in 100 mol% ethanol. A, D, G: AlphaFold2 structure before simulation. B, E, H: Superimposition of 10 snapshots from the last 100 ns of each 400 ns simulation. C, F, I: Snapshots at 400 ns. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 9 Time series averages for 400 ns MD simulations. A: Backbone RMSD relative to the AlphaFold2 structure. B: Radius of gyration (Rg). C: Solvent accessible surface area (SASA). D: Total helicity (sum of α- and 310-helicity). Values for each ethanol concentration were averaged over the last 100 ns of each simulation time series and then over the three simulations (seed 1–3) per concentration. Error bars indicate standard deviation across seeds seed 1–3. For the associated time series see S3 Fig in S1 File.
Fig 9 Time series averages for 400 ns MD simulations. A: Backbone RMSD relative to the AlphaFold2 structure. B: Radius of gyration (Rg). C: Solvent accessible surface area (SASA). D: Total helicity (sum of α- and 310-helicity). Values for each ethanol concentration were averaged over the last 100 ns of each simulation time series and then over the three simulations (seed 1–3) per concentration. Error bars indicate standard deviation across seeds seed 1–3. For the associated time series see S3 Fig in S1 File.CC BY · PubMed Central
Fig 10 Least-mobile substructures in the 400 ns MD simulations. The graphs for each simulation show the lowest RMSD of Cα-atoms after superpositions of all subsets of size ϕ (fraction of the total number of Cα atoms). The analysis was carried out on the last 100 ns of each simulation with MDLovoFit [82].
Fig 10 Least-mobile substructures in the 400 ns MD simulations. The graphs for each simulation show the lowest RMSD of Cα-atoms after superpositions of all subsets of size ϕ (fraction of the total number of Cα atoms). The analysis was carried out on the last 100 ns of each simulation with MDLovoFit [82].CC BY · PubMed Central
Fig 11 Helicity per residue. The height of the blue bars in the foreground indicates the helicity in percent from MD simulations (sum of 310 and α-helicity of the last 100 ns of each 400 ns simulation averaged over all 15 × 400 ns MD simulations.) The uniform orange bars in the background indicate positions of α-helical residues in the AlphaFold2 model.
Fig 11 Helicity per residue. The height of the blue bars in the foreground indicates the helicity in percent from MD simulations (sum of 310 and α-helicity of the last 100 ns of each 400 ns simulation averaged over all 15 × 400 ns MD simulations.) The uniform orange bars in the background indicate positions of α-helical residues in the AlphaFold2 model.CC BY · PubMed Central
Fig 12 Large-scale motion of helices in C-terminal bundle during a 400 ns ethanol simulation (seed 1). A: Initial AlphaFold2 structure. B: Disruption of the α-helical bundle. C: Full extension of the helix-N164-helix hairpin. D: Partial reconstitution of the hairpin. The ribbon representation is colored by secondary structure (see legend in Fig 3B).
Fig 12 Large-scale motion of helices in C-terminal bundle during a 400 ns ethanol simulation (seed 1). A: Initial AlphaFold2 structure. B: Disruption of the α-helical bundle. C: Full extension of the helix-N164-helix hairpin. D: Partial reconstitution of the hairpin. The ribbon representation is colored by secondary structure (see legend in Fig 3B).CC BY · PubMed Central
Fig 13 SAXS predictions from MD simulations and fitting to published experimental data. Predictions from MD frames at t = 0 ns, 100 ns, 200 ns, 300 ns, 400 ns of the (seed 1) 400 ns 100% ethanol simulation (red) and fit to experimental SAXS (black) from [41]. (A, C, E, G, I): MD predictions against experimental SAXS. (B, D, F, H, J): MD predictions against experimental SAXS extrapolated to q = 0 (blue) from the linear low q region of the Guinier plot using SAXSMoW2 [84].
Fig 13 SAXS predictions from MD simulations and fitting to published experimental data. Predictions from MD frames at t = 0 ns, 100 ns, 200 ns, 300 ns, 400 ns of the (seed 1) 400 ns 100% ethanol simulation (red) and fit to experimental SAXS (black) from [41]. (A, C, E, G, I): MD predictions against experimental SAXS. (B, D, F, H, J): MD predictions against experimental SAXS extrapolated to q = 0 (blue) from the linear low q region of the Guinier plot using SAXSMoW2 [84].CC BY · PubMed Central
Fig 14 Snapshots from extended MD simulations. Grey arrows indicate approximate directions of rearrangement. Cα atoms are shown as spheres, coloured by residue position (red: N-terminal, blue: C-terminal). Labelled residues are discussed in the main text. Rotation has been used to highlight features in select snapshots, including the identical initial structures. In the case of 2 mol% ethanol (B), instead of the 2 μs endpoint the structure at 1971 ns is presented to provide a clearer view of the β-structure.
Fig 14 Snapshots from extended MD simulations. Grey arrows indicate approximate directions of rearrangement. Cα atoms are shown as spheres, coloured by residue position (red: N-terminal, blue: C-terminal). Labelled residues are discussed in the main text. Rotation has been used to highlight features in select snapshots, including the identical initial structures. In the case of 2 mol% ethanol (B), instead of the 2 μs endpoint the structure at 1971 ns is presented to provide a clearer view of the β-structure.CC BY · PubMed Central
Fig 15 Monomer preparation for multiple α-zein simulations. A: Endpoint for the extended 1 μs GROMACS MD simulation (seed 3) in water. B: Structure after additional 500 ns Desmond MD simulation in water. This structure was used for both all-atom and coarse-grained simulations of multiple monomers. α-carbons are shown as spheres coloured by sequence position (red: N-terminal, blue: C-terminal).
Fig 15 Monomer preparation for multiple α-zein simulations. A: Endpoint for the extended 1 μs GROMACS MD simulation (seed 3) in water. B: Structure after additional 500 ns Desmond MD simulation in water. This structure was used for both all-atom and coarse-grained simulations of multiple monomers. α-carbons are shown as spheres coloured by sequence position (red: N-terminal, blue: C-terminal).CC BY · PubMed Central
Fig 16 All-atom MD simulations of 6 copies of the globular α-zein monomer. A: Initial configuration. B: Structure after 500 ns MD simulation in water (space filling representation). C: Ribbon representation of (B). D: Representative interactions between zein monomers 1 and 6.
Fig 16 All-atom MD simulations of 6 copies of the globular α-zein monomer. A: Initial configuration. B: Structure after 500 ns MD simulation in water (space filling representation). C: Ribbon representation of (B). D: Representative interactions between zein monomers 1 and 6.CC BY · PubMed Central
Fig 17 Coarse grained MD simulations. A: All-atom MD equilibrated structure before coarse graining with heavy atoms and polar hydrogens shown in ball and stick representation. B: Martini coarse-grained structure. C: Initial setup with 73 zein copies in a water box. D-F: Final MD snapshots at 375 ns for simulations started from seed 1, 2, and 3 respectively. G-I: Alternative visualization of the final MD snapshots for seed 1,2, and 3 showing the largest zein cluster across the periodic images of the simulation box. Water and chloride ions are not shown. Each zein monomer has randomly been assigned colors from a blue-red palette.
Fig 17 Coarse grained MD simulations. A: All-atom MD equilibrated structure before coarse graining with heavy atoms and polar hydrogens shown in ball and stick representation. B: Martini coarse-grained structure. C: Initial setup with 73 zein copies in a water box. D-F: Final MD snapshots at 375 ns for simulations started from seed 1, 2, and 3 respectively. G-I: Alternative visualization of the final MD snapshots for seed 1,2, and 3 showing the largest zein cluster across the periodic images of the simulation box. Water and chloride ions are not shown. Each zein monomer has randomly been assigned colors from a blue-red palette.CC BY · PubMed Central
Fig 18 Interaction between glycidyl methacrylate (GMA) and α-zein during MD. The inset structures show the initial (t = 0 ns) and final (t = 257 ns) configuration of α-zein (white ribbons) and 48 GMA molecules. Red indicates GMA molecules more than 4 Å from the protein. Green indicates GMA molecules within 4 Å of the protein.
Fig 18 Interaction between glycidyl methacrylate (GMA) and α-zein during MD. The inset structures show the initial (t = 0 ns) and final (t = 257 ns) configuration of α-zein (white ribbons) and 48 GMA molecules. Red indicates GMA molecules more than 4 Å from the protein. Green indicates GMA molecules within 4 Å of the protein.CC BY · PubMed Central
Fig 19 α-zein sites with high residence times for glycidyl methacrylate (GMA) during MD. GMA is shown as ball and stick models, zein residues within 4 Å of GMA are shown in stick representation, zein backbone shown in ribbon representation. A: GMA binding persisting for ∼50% of the simulation time. B: GMA binding persisting for ∼15% of the simulation time.
Fig 19 α-zein sites with high residence times for glycidyl methacrylate (GMA) during MD. GMA is shown as ball and stick models, zein residues within 4 Å of GMA are shown in stick representation, zein backbone shown in ribbon representation. A: GMA binding persisting for ∼50% of the simulation time. B: GMA binding persisting for ∼15% of the simulation time.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 89 references

Metadata

Authors
Christensen, N. J.
Affiliations
University of Copenhagen (DK)
Corresponding author
Christensen, Niels Johan
Venue
PLoS ONE
Publisher
openRxiv
Published
2023-10-24
Volume
19
Issue
5
Pages
e0293786-e0293786
ISSN
1932-6203 (ISSN-L)
OpenAlex
W4396731495
Cited by
7
References
89
Citations by year
2026: 4 · 2025: 2 · 2024: 1
FWCI
0.95
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • PLoS ONE (publishedVersion, cc-by)
  • bioRxiv (Cold Spring Harbor Laboratory) (acceptedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Research at the University of Copenhagen (University of Copenhagen) (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Villum Fonden (40932)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein Structure and Dynamics
  • Life Sciences › Agricultural and Biological Sciences › Food Science › Proteins in Food Systems
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Structural Biology › Enzyme Structure and Function
Keywords
alpha-zein, protein tertiary structure, protein conformation, ethanol concentration effects, protein aggregation, glycidyl methacrylate, methacrylation, protein cross-linking, alpha-helix content, β-sheet content, 3D printing materials
MeSH terms
Amino Acid Sequence, Zea mays, Protein Conformation, Water, Zein, Molecular Dynamics Simulation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Conformations of a highly expressed Z19 α-zein studied with AlphaFold2 and MD simulations. https://app.cochat.ai/papers/10.1101/2023.10.20.563246
The paper
Christensen, N. J. (2023). Conformations of a highly expressed Z19 α-zein studied with AlphaFold2 and MD simulations. PLoS ONE. https://doi.org/10.1101/2023.10.20.563246

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.