The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys
Abstract
A simple analytical embedded-atom method (EAM) model is developed. The model includes a long-range force. In this model, the electron-density function is taken as a decreasing exponential function, the two-body potential is defined as a function like a form given by Rose et al. [Phys. Rev. B 33, 7983 (1986)], and the embedding energy is assumed to be an universal form recently suggested by Banerjea and Smith. The embedding energy has a positive curvature. The model is applied to seven fcc metals (Al, Ag, Au, Cu, Ni, Pd, and Pt) and their binary alloys. All the considered properties, whether for pure metal systems or for alloy systems, are predicted to be satisfactory at least qualitatively. The model resolves the problems of Johnson's model for predicting the properties of the alloys involving metal Pd. However, more importantly, (i) by investigating the structure stability of seven fcc metals using the present model, we found that the stability energy is dominated by both the embedding energy and the pair potential for fcc-bcc stability while the pair potential dominates and is underestimated for fcc-hcp stability; and (ii) we find that the predicted total energy as a function of lattice parameter is in good agreement with the equation of state of Rose et al. for all seven fcc metals, and that this agreement is closely related to the electron density, i.e., the lower the contribution from atoms of the second-nearest neighbor to host density, the better the agreement becomes. We conclude the following: (i) for an EAM, where angle force is not considered, the long-range force is necessary for a prediction of the structure stability; or (ii) the dependence of the electron density on angle should be considered so as to improve the structure-stability energy. The conclusions are valid for all EAM models where an angle force is not considered. \textcopyright{} 1996 The American Physical Society.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hohenberg, P., & Kohn, W. (1964) · Physical Review · doi:10.1103/physrev.136.b864 · Cited by 53,541
A Simplex Method for Function Minimization
Nelder, J. A., & Mead, R. (1965) · The Computer Journal · doi:10.1093/comjnl/7.4.308 · Cited by 28,905
Introduction to Solid State Physics
Kittel, C., & Fan, H. Y. (1957) · American Journal of Physics · doi:10.1119/1.1934457 · Cited by 22,240
Daw, M. S., & Baskes, M. I. (1984) · Physical Review B · doi:10.1103/physrevb.29.6443 · Cited by 7,263
Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys
Foiles, S. M., Baskes, M. I., & Daw, M. S. (1986) · Physical Review B · doi:10.1103/physrevb.33.7983 · Cited by 4,637
Selected values of the thermodynamic properties of binary alloys
Hultgren, R., Desai, P. D., Hawkins, D. T., Gleiser, M., & Kelley, K. K. (1973) · CERN Document Server (European Organization for Nuclear Research) · Cited by 3,316
A simple empirical N-body potential for transition metals
Finnis, M. W., & Sinclair, J. E. (1984) · Philosophical Magazine A · doi:10.1080/01418618408244210 · Cited by 3,159
Adsorbate-substrate and adsorbate-adsorbate interactions of Na and K adlayers on Al(111)
Neugebauer, J., & Scheffler, M. (1992) · Physical Review B · doi:10.1103/physrevb.46.16067 · Cited by 2,842
Semiempirical, Quantum Mechanical Calculation of Hydrogen Embrittlement in Metals
Daw, M. S., & Baskes, M. I. (1983) · Physical Review Letters · doi:10.1103/physrevlett.50.1285 · Cited by 2,712
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Cited by
The General Utility Lattice Program ( GULP )
Gale, J. D., & Rohl, A. L. (2003) · Molecular Simulation · doi:10.1080/0892702031000104887 · Cited by 2,265
An embedded-atom potential for the Cu–Ag system
Williams, P. L., Mishin, Y., & Hamilton, J. C. (2006) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/14/5/002 · Cited by 577
Alloys created between immiscible elements
MA, E. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2004.07.001 · Cited by 388
The diffusion behaviors at the Cu-Al solid-liquid interface: A molecular dynamics study
Mao, A., Zhang, J., Yao, S., Wang, A., Wang, W., Li, Y., Qiao, C., Xie, J., & Jia, Y. (2020) · Results in Physics · doi:10.1016/j.rinp.2020.102998 · Cited by 115
Dynamic Weld evolution during ultrasonic welding of Cu–Al joints
Ma, Q., Song, C., Zhou, J., Zhang, L., & Ji, H. (2021) · Materials Science and Engineering: A · doi:10.1016/j.msea.2021.141724 · Cited by 76
Metadata
- Authors
- Cai, J., & Ye, Y. Y.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 1996-09-15
- Volume
- 54
- Issue
- 12
- Pages
- 8398-8410
- ISSN
- 0163-1829 (ISSN-L)
- 1095-3795
- OpenAlex
- W2062075560
- Cited by
- 423
- References
- 21
- FWCI
- 15.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys. https://app.cochat.ai/papers/10.1103/physrevb.54.8398
- The paper
- Cai, J., & Ye, Y. Y. (1996). Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys. Physical Review B. https://doi.org/10.1103/physrevb.54.8398
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.