The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Mn+1AXnphases in theTi−Si−Csystem studied by thin-film synthesis and ab initio calculations
Open accessAbstract
Thin films of ${M}_{n+1}A{X}_{n}$ layered compounds in the $\mathrm{Ti}\text{\ensuremath{-}}\mathrm{Si}\text{\ensuremath{-}}\mathrm{C}$ system were deposited on $\mathrm{MgO}(111)$ and ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)$ substrates held at $900\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ using dc magnetron sputtering from elemental targets of $\mathrm{Ti}$, $\mathrm{Si}$, and $\mathrm{C}$. We report on single-crystal and epitaxial deposition of ${\mathrm{Ti}}_{3}{\mathrm{SiC}}_{2}$ (the previously reported $MAX$ phase in the $\mathrm{Ti}\text{\ensuremath{-}}\mathrm{Si}\text{\ensuremath{-}}\mathrm{C}$ system), a previously unknown $MAX$ phase ${\mathrm{Ti}}_{4}{\mathrm{SiC}}_{3}$ and another type of structure having the stoichiometry of ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$. The latter two structures can be viewed as an intergrowth of 2 and 3 or 3 and 4 $M$ layers between each $A$ layer. In addition, epitaxial films of ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{3}{\mathrm{C}}_{\mathrm{x}}$ were deposited and ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{4}$ is also observed. First-principles calculations, based on density functional theory (DFT) of ${\mathrm{Ti}}_{n+1}{\mathrm{SiC}}_{n}$ for $n=1$,2,3,4 and the observed intergrown ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$ structures show that the calculated difference in cohesive energy between the $MAX$ phases reported here and competing phases ($\mathrm{TiC}$, ${\mathrm{Ti}}_{3}{\mathrm{SiC}}_{2}$, ${\mathrm{TiSi}}_{2}$, and ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{3}$) are very small. This suggests that the observed ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$ structures at least should be considered as metastable phases. The calculations show that the energy required for insertion of a $\mathrm{Si}$ layer in the $\mathrm{TiC}$ matrix is independent of how close the $\mathrm{Si}$ layers are stacked. Hardness and electrical properties can be related to the number of $\mathrm{Si}$ layers per $\mathrm{Ti}$ layer. This opens up for designed thin film structures the possibility to tune properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Self-interaction correction to density-functional approximations for many-electron systems
Perdew, J. P., & Zunger, A. (1981) · Physical Review B · doi:10.1103/physrevb.23.5048 · Cited by 20,887
Ground State of the Electron Gas by a Stochastic Method
Ceperley, D. M., & Alder, B. J. (1980) · Physical Review Letters · doi:10.1103/physrevlett.45.566 · Cited by 14,384
Improved tetrahedron method for Brillouin-zone integrations
Blöchl, P. E., Jepsen, O., & Andersen, O. K. (1994) · Physical Review B · doi:10.1103/physrevb.49.16223 · Cited by 7,297
The MN+1AXN phases: A new class of solids
Barsoum, M. W. (2000) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00006-6 · Cited by 3,665
Mechanical degradation and viscous dissipation inB2O3
Kieffer, J. (1994) · Physical Review B · doi:10.1103/physrevb.50.17 · Cited by 670
The MAX Phases: Unique New Carbide and Nitride Materials
Barsoum, M., & El-Raghy, T. (2001) · American Scientist · doi:10.1511/2001.28.736 · Cited by 516
The MAX Phases: Unique New Carbide and Nitride Materials
Barsoum, M., & El-Raghy, T. (2001) · American Scientist · doi:10.1511/2001.4.334 · Cited by 433
Corbett, J. D., Garcia, E., Guloy, A. M., Hurng, W. ‐., Kwon, Y., & Leon‐Escamilla, E. A. (1998) · Chemistry of Materials · doi:10.1021/cm980223c · Cited by 94
Cited by
Microstructural design of hard coatings
Mayrhofer, P. H., Mitterer, C., Hultman, L., & Clemens, H. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.002 · Cited by 1,008
Self-citationLayered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
Wang, X. H., & Zhou, Y. C. (2010) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(10)60064-3 · Cited by 655
Khazaei, M., Arai, M., Sasaki, T., Ranjbar, A., Liang, Y., & Yunoki, S. (2015) · Physical Review B · doi:10.1103/physrevb.92.075411 · Cited by 516
Shein, I. R., & Ivanovskii, A. L. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.07.011 · Cited by 386
Frey, N. C., Wang, J., Vega Bellido, G. I., Anasori, B., Gogotsi, Y., & Shenoy, V. B. (2019) · ACS Nano · doi:10.1021/acsnano.8b08014 · Cited by 346
Metadata
- Authors
- Palmquist, J.-P., Li, S., Persson, P. O. Å., Emmerlich, J., Wilhelmsson, O., Högberg, H., Katsnelson, M. I., Johansson, B., Ahuja, R., Eriksson, O., Hultman, L., & Jansson, U.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 2004-10-01
- Volume
- 70
- Issue
- 16
- ISSN
- 1098-0121 (ISSN-L)
- 1550-235X
- OpenAlex
- W2058231323
- Cited by
- 259
- References
- 10
- FWCI
- 8.54
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mn+1AXnphases in theTi−Si−Csystem studied by thin-film synthesis and ab initio calculations. https://app.cochat.ai/papers/10.1103/physrevb.70.165401
- The paper
- Palmquist, J.-P., Li, S., Persson, P. O. Å., Emmerlich, J., Wilhelmsson, O., Högberg, H., Katsnelson, M. I., Johansson, B., Ahuja, R., Eriksson, O., Hultman, L., & Jansson, U. (2004). Mn+1AXnphases in theTi−Si−Csystem studied by thin-film synthesis and ab initio calculations. Physical Review B. https://doi.org/10.1103/physrevb.70.165401
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.