The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Straight velocity boundaries in the lattice Boltzmann method
Open accessAbstract
Various ways of implementing boundary conditions for the numerical solution of the Navier-Stokes equations by a lattice Boltzmann method are discussed. Five commonly adopted approaches are reviewed, analyzed, and compared, including local and nonlocal methods. The discussion is restricted to velocity Dirichlet boundary conditions, and to straight on-lattice boundaries which are aligned with the horizontal and vertical lattice directions. The boundary conditions are first inspected analytically by applying systematically the results of a multiscale analysis to boundary nodes. This procedure makes it possible to compare boundary conditions on an equal footing, although they were originally derived from very different principles. It is concluded that all five boundary conditions exhibit second-order accuracy, consistent with the accuracy of the lattice Boltzmann method. The five methods are then compared numerically for accuracy and stability through benchmarks of two-dimensional and three-dimensional flows. None of the methods is found to be throughout superior to the others. Instead, the choice of a best boundary condition depends on the flow geometry, and on the desired trade-off between accuracy and stability. From the findings of the benchmarks, the boundary conditions can be classified into two major groups. The first group comprehends boundary conditions that preserve the information streaming from the bulk into boundary nodes and complete the missing information through closure relations. Boundary conditions in this group are found to be exceptionally accurate at low Reynolds number. Boundary conditions of the second group replace all variables on boundary nodes by new values. They exhibit generally much better numerical stability and are therefore dedicated for use in high Reynolds number flows.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Numerical recipes in C: the art of scientific computing
(1993) · Choice Reviews Online · doi:10.5860/choice.30-5638 · Cited by 17,933
LATTICE BOLTZMANN METHOD FOR FLUID FLOWS
Chen, S., & Doolen, G. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.329 · Cited by 7,314
Lattice BGK Models for Navier-Stokes Equation
Qian, Y. H., D'Humières, D., & Lallemand, P. (1992) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/17/6/001 · Cited by 5,303
Numerical Recipes in C: The Art of Scientific Computing.
Birchenhall, C., Press, W. H., Teukolsky, S. A., Vetterling, W. T., & Flannery, B. P. (1994) · The Economic Journal · doi:10.2307/2234664 · Cited by 4,355
The Lattice Boltzmann Equation for Fluid Dynamics and Beyond
Succi, S. (2001) · doi:10.1093/oso/9780198503989.001.0001 · Cited by 4,188
The Lattice Boltzmann Equation: For Fluid Dynamics and Beyond
Yeomans, J. M. (2001) · Cited by 2,947
Discrete lattice effects on the forcing term in the lattice Boltzmann method
Guo, Z., Zheng, C., & Shi, B. (2002) · Physical Review E · doi:10.1103/physreve.65.046308 · Cited by 2,410
On pressure and velocity boundary conditions for the lattice Boltzmann BGK model
Zou, Q., & He, X. (1997) · Physics of Fluids · doi:10.1063/1.869307 · Cited by 2,226
Crimins, F. (2003) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-003-0001-6 · Cited by 2,000
Womersley, J. R. (1955) · The Journal of Physiology · doi:10.1113/jphysiol.1955.sp005276 · Cited by 1,835
Cited by
Multiphase lattice Boltzmann simulations for porous media applications: A review
Liu, H., Kang, Q., Leonardi, C. R., Schmieschek, S., Narváez, A., Jones, B. D., Williams, J. R., Valocchi, A. J., & Harting, J. (2016) · Computational Geosciences · doi:10.1007/s10596-015-9542-3 · Cited by 464
Palabos: Parallel Lattice Boltzmann Solver
Latt, J., Malaspinas, O., Kontaxakis, D., Parmigiani, A., Lagrava, D., Brogi, F., Belgacem, M. B., Thorimbert, Y., Leclaire, S., Li, S., et al. (2021) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2020.03.022 · Cited by 446
Self-citationWang, M., Chen, Y.-F., Ma, G.-W., Zhou, J.-Q., & Zhou, C.-B. (2016) · Advances in Water Resources · doi:10.1016/j.advwatres.2016.08.006 · Cited by 292
OpenLB—Open source lattice Boltzmann code
Krause, M. J., Kummerländer, A., Avis, S. J., Kusumaatmaja, H., Dapelo, D., Klemens, F., Gaedtke, M., Hafen, N., Mink, A., Trunk, R., et al. (2021) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2020.04.033 · Cited by 203
Numerical evaluation of thermal comfort using a large eddy lattice Boltzmann method
Siodlaczek, M., Gaedtke, M., Simonis, S., Schweiker, M., Homma, N., & Krause, M. J. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.107618 · Cited by 30
Metadata
- Authors
- Latt, J., Chopard, B., Malaspinas, O., Deville, M., & Michler, A.
- Venue
- Physical Review E
- Publisher
- American Physical Society (APS)
- Published
- 2008-05-13
- Volume
- 77
- Issue
- 5
- Pages
- 056703-056703
- ISSN
- 1539-3755 (ISSN-L)
- 1550-2376
- OpenAlex
- W2013976274
- Cited by
- 354
- References
- 19
- FWCI
- 15.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Straight velocity boundaries in the lattice Boltzmann method. https://app.cochat.ai/papers/10.1103/physreve.77.056703
- The paper
- Latt, J., Chopard, B., Malaspinas, O., Deville, M., & Michler, A. (2008). Straight velocity boundaries in the lattice Boltzmann method. Physical Review E. https://doi.org/10.1103/physreve.77.056703
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.