Experimental observation of high intrinsic thermal conductivity of AlN
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Wurtzite AlN is an ultrawide bandgap semiconductor that has been developed for applications including power electronics and optoelectronics. Thermal management of these applications is the key for stable device performance and allowing for long lifetimes. However, the intrinsic high thermal conductivity of bulk AlN predicted by theoretical calculations has not been experimentally observed because of the difficulty in producing high-quality materials. This work reports the growth of thick (>15 \ensuremath{\mu}m) AlN layers by metal-organic chemical vapor deposition and experimental observation of intrinsic thermal conductivity from 130 to 480 K that matches density-functional-theory calculations for single crystal AlN, producing some of the highest values ever measured. Detailed material characterizations confirm the high quality of these AlN samples with one or two orders of magnitude lower impurity concentrations than commercially available bulk AlN. The thermal conductivity of these commercially available bulk AlN substrates are also measured as comparison. To interpret the reduced thermal conductivity, a simple Callaway model is built. This work demonstrates the possibility of obtaining theoretically high values of thermal conductivity in AlN and will impact the thermal management and reliability of future electronic and optoelectronics devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ShengBTE: A solver of the Boltzmann transport equation for phonons
Li, W., Carrete, J., A. Katcho, N., & Mingo, N. (2014) · Computer Physics Communications · doi:10.1016/j.cpc.2014.02.015 · Cited by 3,147
Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges
Tsao, J. Y., Chowdhury, S., Hollis, M. A., Jena, D., Johnson, N. M., Jones, K. A., Kaplar, R. J., Rajan, S., Van de Walle, C. G., Bellotti, E., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201600501 · Cited by 1,602 · cited 1×
“y using ShengBTE 33in a 12 × 12 ×12 Monkhorst-Pack grid. Thermal Model The thermal conductivity of non-metal crystalline material can be expressed as34-37 𝑘=1 3 ∑∫ ℏ𝜔�𝜆 𝑑𝑓�𝐸 𝑑� 𝜔cut−off 0 𝑣𝜆 2𝜏 𝑝 �,𝜆,(1) where 𝜔 is the phonon frequency, ℏ is the reduced Planck constant, 𝑣𝜆 is the modal phonon group velocity of phonon…”
Self-citationAnalysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
The intrinsic thermal conductivity of AIN
Slack, G. A., Tanzilli, R. A., Pohl, R. O., & Vandersande, J. W. (1987) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(87)90153-3 · Cited by 1,009
High Thermal Boundary Conductance across Bonded Heterogeneous GaN—SiC Interfaces
Mu, F., Cheng, Z., Shi, J., Shin, S., Xu, B., Shiomi, J., Graham, S., & Suga, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10106 · Cited by 159
Self-citationCheng, Z., Bougher, T., Bai, T., Wang, S. Y., Li, C., Yates, L., Foley, B. M., Goorsky, M., Cola, B. A., Faili, F., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16812 · Cited by 76
Self-citation
Metadata
- Authors
- Cheng, Z., Koh, Y. R., Mamun, A., Shi, J., Bai, T., Huynh, K., Yates, L., Liu, Z., Li, R., Lee, E., Liao, M. E., Wang, Y., Yu, H. M., Kushimoto, M., Luo, T., Goorsky, M. S., Hopkins, P. E., Amano, H., Khan, A., & Graham, S.
- Venue
- Physical Review Materials
- Publisher
- American Physical Society (APS)
- Published
- 2020-04-23
- Volume
- 4
- Issue
- 4
- ISSN
- 2475-9953 (ISSN-L)
- OpenAlex
- W2985969776
- Cited by
- 183
- References
- 6
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.