Crystals for quartz resonators
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
This paper briefly describes the hydrothermal growth process and then discusses the important defects in quartz (twins, inclusions, dislocations, and impurities) and the correlations among them. The properties of quartz are reviewed and tabulated under the headings of intrinsic properties and defect-related properties. Resonator theory and fabrication techniques are outlined, with particular reference to aspects related to defects in the crystals. At this stage, it is possible to list the circuit design factors which must be taken into account when the application calls for very high performance. The paper then looks at the approach of a device maker faced with problems caused by impurities, inclusions, dislocations, and other nonideal properties of real crystals. This question leads to a specification of the crystals suitable for device use. The major parameter of this specification is the infrared $Q$, which must exceed about 1.8 million for satisfactory performance and yield. Acceptance test procedures are discussed, and finally the present state of the subject and the future prospects are briefly described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effective ionic radii in oxides and fluorides
Shannon, R. D., & Prewitt, C. T. (1969) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740869003220 · Cited by 8,627
Samsonov, G. V. (1973) · Springer eBooks · doi:10.1007/978-1-4615-9597-7 · Cited by 1,377
American institute of physics handbook
Carnahan, C. (1963) · Proceedings of the IEEE · doi:10.1109/proc.1963.2730 · Cited by 400
Handbook of Chemistry and Physics
Atkinson, H. H. (1963) · Physics Bulletin · doi:10.1088/0031-9112/14/11/014 · Cited by 309
Fundamentals of Crystal Growth I
Rosenberger, F. E. (1979) · Springer Series in Solid-State Sciences · doi:10.1007/978-3-642-81275-0 · Cited by 292
Design of Resonant Piezoelectric Devices
Holland, R., & EerNisse, E. P. (1969) · Medical Entomology and Zoology · Cited by 227
Thermal expansion and the high–low transformation in quartz. I. High-temperature X-ray studies
Ackermann, R. J., & Sorrell, C. A. (1974) · Journal of Applied Crystallography · doi:10.1107/s0021889874010211 · Cited by 114
The lattice constants of a-quartz
Brice, J. C. (1980) · Journal of Materials Science · doi:10.1007/bf00552441 · Cited by 49
Self-citation
Cited by
EPR of iron centres in silicon dioxide
Weil, J. A. (1994) · Applied Magnetic Resonance · doi:10.1007/bf03162478 · Cited by 25
Thin-film quartz for high-coherence piezoelectric phononic crystal resonators
Emser, A. L., Metzger, C., Rose, B. C., & Lehnert, K. W. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.22.064032 · Cited by 8
Metadata
- Authors
- Brice, J. C.
- Venue
- Reviews of Modern Physics
- Publisher
- American Physical Society (APS)
- Published
- 1985-01-01
- Volume
- 57
- Issue
- 1
- Pages
- 105-146
- ISSN
- 0034-6861 (ISSN-L)
- OpenAlex
- W2091972181
- Cited by
- 217
- References
- 8
- FWCI
- 9.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.