A survey of the literature on the use of high velocity oxy‐fuel spray technology for high temperature corrosion and erosion‐corrosion resistant coatings
The DOI matches its Crossref record.
Abstract
Purpose: This paper seeks to summarise the results of available research on the use of high velocity oxy‐fuel (HVOF) thermal‐spray technique to provide protection against high temperature corrosion and erosion‐corrosion of materials. Design/methodology/approach: This paper describes one of the recent thermal‐spray processes, namely HVOF thermal‐spray technology and presents a survey of the studies on the use of this technique to provide protection against corrosion and erosion‐corrosion of high temperature alloys, with a special emphasis on boiler steels. Findings: High temperature corrosion and erosion‐corrosion are serious problems observed in steam‐powered electricity generation plants, gas turbines, internal combustion engines, fluidized bed combustors, industrial waste incinerators and recovery boilers in paper and pulp industries. These problems can be prevented by changing the material or altering the environment, or by separating the component surface from the environment. Corrosion prevention by the use of coatings for separating materials from the environment is gaining importance in surface engineering. Amongst various surface modifying techniques, thermal spraying has developed relatively rapidly due to the use of advanced coating formulations and improvements in coating application technology. One of the variants of thermal spraying, namely HVOF has gained popularity in recent times due to its flexibility for in‐situ applications and superior coating properties. Research limitations/implications: This review covers mainly information that has been reported previously in the open literature, international journals and some well‐known textbooks. Practical implications: The paper presents a concise summary of information for scientists and academics, planning to start their research work in the area of surface engineering. Originality/value: This paper fulfils an identified information/resources need and offers practical help to an individual starting out on a career in the area of surface engineering for erosion‐corrosion and wear.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The 2016 Thermal Spray Roadmap
Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., Dolatabadi, A., et al. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0473-x · Cited by 334
Oksa, M., Auerkari, P., Salonen, J., & Varis, T. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.04.006 · Cited by 78
Improving hot corrosion resistance of Cr 3 C 2 –20NiCr coatings with CNT reinforcements
Goyal, K., & Goyal, R. (2020) · Surface Engineering · doi:10.1080/02670844.2019.1662645 · Cited by 42
“The thermal spray coatings are porous in nature, and porosity strongly in fl uences the coating properties [31 – 33].”
BackgroundOksa, M., Varis, T., & Ruusuvuori, K. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.04.025 · Cited by 26
Ansari, M. S., Bansal, A., Chawla, V., & Aggarwal, V. (2021) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/ac0171 · Cited by 2
Metadata
- Authors
- Kaur, M., Singh, H., & Prakash, S.
- Venue
- Anti-Corrosion Methods and Materials
- Publisher
- Emerald
- Published
- 2008-03-21
- Volume
- 55
- Issue
- 2
- Pages
- 86-96
- ISSN
- 0003-5599 (ISSN-L)
- OpenAlex
- W1964570543
- Cited by
- 50
- References
- 0
- FWCI
- 0.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A survey of the literature on the use of high velocity oxy‐fuel spray technology for high temperature corrosion and erosion‐corrosion resistant coatings. https://app.cochat.ai/papers/10.1108/00035590810859467
- The paper
- Kaur, M., Singh, H., & Prakash, S. (2008). A survey of the literature on the use of high velocity oxy‐fuel spray technology for high temperature corrosion and erosion‐corrosion resistant coatings. Anti-Corrosion Methods and Materials. https://doi.org/10.1108/00035590810859467
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.