CoChat

Comparative study of hot corrosion behavior of bare and plasma sprayed Al 2 O 3 -40%TiO 2 coated T-91, A-1 boiler steel and Superfer800H superalloy in Na 2 SO 4 -60%V 2 O 5 salt environment

Ansari, Mohd Shadab, Bansal, Amit, Chawla, Vikas, Aggarwal, Vivek · 2021 · Surface Topography: Metrology and Properties

The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.

Abstract

In the present study, the bi-layer NiCrAlY/Al 2 O 3 -40%TiO 2 coating was deposited on the three substrates (A-1, T-91, & Superfer800H) by utilizing a plasma spray technique. NiCrAlY was used as a bond coat for ensuring a proper mechanical anchorage of the topcoat (Al 2 O 3 -40%TiO 2 ) on to it. The hot corrosion behavior of the coated as well as uncoated substrate was evaluated in an aggressive environment of Na 2 SO 4 -60%V 2 O 5 molten salt at 900 °C for 50 cycles (1 h of heating followed by 20 min of cooling at ambient temperature). Thermogravimetric analysis was done to establish the corrosion kinetics of the coated as well as the uncoated substrate. The surface morphology of the as-sprayed and corroded products was analyzed by using a scanning electron microscope (SEM) system, and various phases formed were analyzed by utilizing an x-ray Diffraction (XRD) apparatus. Iron oxide (Fe 2 O 3 ) is the principal phase formed in the tested uncoated substrate which is non-protective in nature; whereas the presence of Al, and Ti oxides along with some minor oxides of Ni, and Cr were observed in the oxide scale of the tested coated substrate, which are protective and remain stable even at harsh environment condition. The weight gain shown by the coated substrate is less as compared to the uncoated substrate, which indicates the usefulness of the coating.

Overview

Integrity signals

Registry

Crossref · 10.1088/2051-672x/ac0171

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

1 retracted

Show all 44 references

Research works printed but not linked: 11

  1. Khanna, 1998, Trans. Indian Inst. Met., 51, 279
  2. Liu, 2005, Journal of the European Society, 25, 133
  3. Mangla, 2017, International. Journal. of Engineering. Science. and Research. Technology, 6, 674
  4. Chatha, 2013, Thermal Spray Technology, 22, 838, 10.1007/s11666-013-9899-6 · DOI · Paper page
  5. Priyantha, 2003, Surface and Coating Technology, 31, 163
  6. Chawla, 2008, J. Aust. Ceram. Soc., 44, 56
  7. Chawla, 2010, Journal of Minerals and Materials Characterization and Engineering, 593–606, 2010
  8. Mehta, 2018, Journal of Material Science and Mechanical Engineering, 5, 181
  9. Simms, 2004, Material Science Forum, 461–464, 941, 10.4028/www.scientific.net/msf.461-464.941 · DOI
  10. Chawla, 2011, J. Australas. Ceram. Soc., 47, 48
  11. Sheng-Kai, 2015, Transactions of Nonferrous Metals Society of China, 25, 175, 10.1016/s1003-6326(15)63593-2 · DOI

Cited by

See all 2

Metadata

Authors
Ansari, M. S., Bansal, A., Chawla, V., & Aggarwal, V.
Affiliations
Punjab Technical University (IN)
Corresponding author
Ansari, Mohd Shadab
Venue
Surface Topography: Metrology and Properties
Published
2021-05-28
Volume
9
Issue
2
Pages
025029
ISSN
2051-672X (ISSN-L)
OpenAlex
W3162210757
Cited by
2
References
43
Citations by year
2024: 2
FWCI
0.26
Type
journal article
Language
en
Open access
closed
Licence
Locations
Surface Topography Metrology and Properties (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
  • Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
Keywords
hot corrosion, plasma-sprayed coatings, Al2O3-TiO2 coatings, NiCrAlY bond coat, corrosion kinetics, oxide scale, protective oxide scale, weight gain, iron oxide formation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comparative study of hot corrosion behavior of bare and plasma sprayed Al 2 O 3 -40%TiO 2 coated T-91, A-1 boiler steel and Superfer800H superalloy in Na 2 SO 4 -60%V 2 O 5 salt environment. https://app.cochat.ai/papers/10.1088/2051-672x/ac0171
The paper
Ansari, M. S., Bansal, A., Chawla, V., & Aggarwal, V. (2021). Comparative study of hot corrosion behavior of bare and plasma sprayed Al 2 O 3 -40%TiO 2 coated T-91, A-1 boiler steel and Superfer800H superalloy in Na 2 SO 4 -60%V 2 O 5 salt environment. Surface Topography: Metrology and Properties. https://doi.org/10.1088/2051-672x/ac0171

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.