Production system design elements influencing productivity and ergonomics: A case study of parallel and serial flow strategies
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Purpose: The purpose of this paper is to investigate a strategic change from parallel cell‐based assembly (old) to serial‐line assembly (new) in a Swedish company with special reference to how production system design elements affect both productivity and ergonomics. Design/methodology/approach: Multiple methods, including records and video analysis, questionnaires, interviews, biomechanical modelling, and flow simulation were applied. Findings: The new system, unlike the old, showed the emergence of system and balance losses as well as vulnerability to disturbances and difficulty handling all product variants. Nevertheless, the new system as realised partially overcame productivity barriers in the operation and management of the old system. The new system had impaired ergonomics due to decreased physical variation and increased repetitiveness with cycle times that were 6 per cent of previous thus increasing repetitiveness, and significantly reducing perceived influence over work. Workstations' uneven exposure to physical tasks such as nut running created a potential problem for workload management. The adoption of teamwork in the new system contributed to significantly increased co‐worker support – an ergonomic benefit. Practical implications: Design decisions made early in the development process affect both ergonomics and productivity in the resulting system. While the time pattern of physical loading appeared to be controlled by flow and work organisation elements, the amplitude of loading was determined more by workstation layout. Psychosocial conditions appear to be affected by a combination of system elements including layout, flow, and work organisation elements. Strategic use of parallelisation elements in assembly, perhaps in hybrid forms from configurations observed here, appears to be a viable design option for improved performance by reducing the fragility and ergonomic problems of assembly lines. Originality/value: The interacting design elements examined here pose potential “levers” of control by which productivity and ergonomics could be jointly optimised for improved total system performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Job Demands, Job Decision Latitude, and Mental Strain: Implications for Job Redesign
Karasek, R. A. (1979) · Administrative Science Quarterly · doi:10.2307/2392498 · Cited by 12,597
Psychophysical scaling with applications in physical work and the perception of exertion
Borg, G. (1990) · Scandinavian Journal of Work, Environment & Health · doi:10.5271/sjweh.1815 · Cited by 1,817 · cited 1×
“Question instruments included perceived physical workload assessed using Borg’s RP-10 scale (Borg, 1990), tested with paired t-tests.”
MethodParker, S. K. (2003) · Journal of Applied Psychology · doi:10.1037/0021-9010.88.4.620 · Cited by 438 · cited 2×
“Line systems have long been criticised for reducing operators’ control of their work (Ellegård et al., 1992a; Eijnatten et al., 1993) and have been associated with reduced commitment and job depression (Parker, 2003).”
Background
Cited by
Neumann, W. P., Winkelhaus, S., Grosse, E. H., & Glock, C. H. (2021) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107992 · Cited by 583
Self-citationErgonomics contributions to company strategies
Dul, J., & Neumann, W. P. (2009) · Applied Ergonomics · doi:10.1016/j.apergo.2008.07.001 · Cited by 431
Self-citationWestgaard, R. H., & Winkel, J. (2011) · Applied Ergonomics · doi:10.1016/j.apergo.2010.07.002 · Cited by 298
Self-citationNew methodological framework to improve productivity and ergonomics in assembly system design
Battini, D., Faccio, M., Persona, A., & Sgarbossa, F. (2011) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2010.12.001 · Cited by 284
Grosse, E. H., Sgarbossa, F., Berlin, C., & Neumann, W. P. (2023) · International Journal of Production Research · doi:10.1080/00207543.2023.2246783 · Cited by 249
Self-citation
Metadata
- Authors
- Neumann, W. P., Winkel, J., Medbo, L., Magneberg, R., & Mathiassen, S. E.
- Venue
- International Journal of Operations & Production Management
- Publisher
- Emerald
- Published
- 2006-08-01
- Volume
- 26
- Issue
- 8
- Pages
- 904-923
- ISSN
- 0144-3577 (ISSN-L)
- OpenAlex
- W2075302088
- Cited by
- 133
- References
- 3
- FWCI
- 10.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production system design elements influencing productivity and ergonomics: A case study of parallel and serial flow strategies. https://app.cochat.ai/papers/10.1108/01443570610678666
- The paper
- Neumann, W. P., Winkel, J., Medbo, L., Magneberg, R., & Mathiassen, S. E. (2006). Production system design elements influencing productivity and ergonomics: A case study of parallel and serial flow strategies. International Journal of Operations & Production Management. https://doi.org/10.1108/01443570610678666
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.