Internal lean practices and operational performance: The contingency perspective of industry clockspeed
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Purpose: The purpose of this research is to examine the effect of internal lean practices on multiple operational performance dimensions, and assess the contingency perspective of these relationships with respect to industry clockspeed. Design/methodology/approach: The study is based on empirical data gathered from 228 manufacturing companies in the Republic of Ireland. The relationships between the constructs are analyzed through regression analysis. Findings: The results indicate that the relationships between internal lean practices and quality, delivery, flexibility and cost were found to be positive and significant. Further, industry clockspeed was found to moderate the relationship between internal lean practices and quality, delivery and flexibility, but not cost. Practical implications: While internal lean practices can improve operational performance, managers should be aware that internal lean practices are not universally applicable, and the rate of change within an industry should be considered at the time of implementing lean principles. Originality/value: Much of the lean literature tends to be biased towards its effectiveness. However, empirical evidence shows that not all lean implementation have led to positive results, which has been attributed to the general complexity in the relationship between internal lean practices and performance. We propose to investigate further this relationship by disaggregating operational performance into four of its dimensions, namely quality, delivery, flexibility and cost, and by investigating the possible contingency effect of industry clockspeed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hu, L., & Bentler, P. M. (1999) · Structural Equation Modeling A Multidisciplinary Journal · doi:10.1080/10705519909540118 · Cited by 108,788
Baron, R. M., & Kenny, D. A. (1986) · Journal of Personality and Social Psychology · doi:10.1037/0022-3514.51.6.1173 · Cited by 91,532
Podsakoff, P. M., MacKenzie, S. B., Lee, J.-Y., & Podsakoff, N. P. (2003) · Journal of Applied Psychology · doi:10.1037/0021-9010.88.5.879 · Cited by 82,194
Structural equation models with unobservable variables and measurement error: Algebra and statistics
Fornell, C., & Larcker, D. F. (1981) · Journal of Marketing Research · doi:10.1177/002224378101800313 · Cited by 13,287
A Caution Regarding Rules of Thumb for Variance Inflation Factors
O’brien, R. M. (2007) · Quality & Quantity · doi:10.1007/s11135-006-9018-6 · Cited by 11,217
Structural Equation Modelling: Guidelines for Determining Model Fit
Hooper, D., Coughlan, J., & Mullen, M. R. (2008) · Dublin Institute of Technology · doi:10.21427/d7cf7r · Cited by 8,746
Chin, W. W., Marcolin, B. L., & Newsted, P. R. (2003) · Information Systems Research · doi:10.1287/isre.14.2.189.16018 · Cited by 6,479 · cited 1×
“Ordinary least square (OLS) analyses were carried out in three steps following a hierarchical process (Chin et al., 2003).”
MethodReliability and Validity Assessment
Carmines, E., & Zeller, R. (1979) · doi:10.4135/9781412985642 · Cited by 5,884
Differentiation and Integration in Complex Organizations
Lawrence, P. R., & Lorsch, J. W. (1967) · Administrative Science Quarterly · doi:10.2307/2391211 · Cited by 3,937 · cited 3×
“Contingency theory is a major theoretical lens that considers this view, which naturally poses a threat to the one-way approach to organize a company (Lawrence and Lorsch, 1967).”
BackgroundThe impact of supply chain integration on performance: A contingency and configuration approach
Flynn, B. B., Huo, B., & Zhao, X. (2010) · Journal of Operations Management · doi:10.1016/j.jom.2009.06.001 · Cited by 3,310 · cited 2×
“In other words, the contingency argument suggests that the environment that an organization operates within shapes its structure, and therefore, in order to maximize performance organizations should match their structures and processes to the environment (Flynn et al., 2010).”
BackgroundResultLean manufacturing: context, practice bundles, and performance
Shah, R., & Ward, P. T. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00108-0 · Cited by 2,897 · cited 10×
“Internal lean practices are described in the literature as a manufacturing system that encompasses manufacturing practices such as pull-production systems, set-up time reduction, JIT and quality management (Cua et al., 2001; Shah and Ward, 2003; Simpson and Power, 2005; Li et al., 2005; Jayaram et al., 2008; So and Su…”
BackgroundResultInfluentialStrategy‐making and environment: The third link
Miller, D., & Friesen, P. H. (1983) · Strategic Management Journal · doi:10.1002/smj.4250040304 · Cited by 1,986 · cited 1×
“Environmental dynamism can arise from many sources, including the rate of change of innovation in the company’s principal industries, the introduction of new products and services, and the uncertainty or unpredictability of competitors’ actions and customers’ preferences (Lawrence and Lorsch, 1967; Miller and Friesen,…”
BackgroundContingency research in operations management practices
Sousa, R., & Voss, C. A. (2008) · Journal of Operations Management · doi:10.1016/j.jom.2008.06.001 · Cited by 996
Contingency Perspectives of Organizational Strategy: A Critical Review of the Empirical Research
Ginsberg, A., & Venkatraman, N. (1985) · The Academy of Management Review · doi:10.2307/258125 · Cited by 725
KANNAN, V (2005) · Omega · doi:10.1016/j.omega.2004.03.012 · Cited by 720 · cited 6×
“JIT techniques go hand in hand with machine set-up time reduction and quality management as they are seen as part of the overall strategy to reduce inventories and utilize resources more efficiently (Karlsson and Åhlström, 1996; Kannan and Tan, 2005).”
BackgroundMethodInfluentialThe impact of just-in-time manufacturing on firm performance in the US
Huson, M., & Nanda, D. (1995) · Journal of Operations Management · doi:10.1016/0272-6963(95)00011-g · Cited by 261 · cited 4×
“Finally, with regard to “cost” reduction, internal lean practices have been found to be effective, which corroborates the traditional view that manufacturing practices, which aim to increase productivity such as lean, will minimize cost as its most obvious benefit (Huson and Nanda, 1995; Cua et al., 2001).”
BackgroundInfluential
Cited by
Sheel, A., & Nath, V. (2019) · Management Research Review · doi:10.1108/mrr-12-2018-0490 · Cited by 262
Prajogo, D., Oke, A., & Olhager, J. (2016) · International Journal of Operations & Production Management · doi:10.1108/ijopm-03-2014-0129 · Cited by 253
Internal lean practices and performance: The role of technological turbulence
Chavez, R., Yu, W., Jacobs, M., Fynes, B., Wiengarten, F., & Lecuna, A. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.10.005 · Cited by 200
“Accordingly, our study offers the first contribution to the lean literature that specifically studies the contingency role of TT and complements recent empirical work (Browning and Heath, 2009; Azadegan et al., 2013; Chavez et al., 2013).”
BackgroundSelf-citationThe lean and resilient management of the supply chain and its impact on performance
Ruiz-Benítez, R., López, C., & Real, J. C. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.06.009 · Cited by 169
Antony, J., Psomas, E., Garza-Reyes, J. A., & Hines, P. (2021) · Production Planning & Control · doi:10.1080/09537287.2020.1776410 · Cited by 116
“…Beraldin, Danese, and Romano 2019; Birkie 2016; Birkie and Trucco 2016; Boyle, Scherrer-Rathje, and Stuart 2011; Camuffo, Stefano, and Paolino 2017; Chavez et al. 2013; Chavez et al. 2015; Dun, Hicks, and Wilderom 2017; Fullerton, Kennedy, and Widener 2014; Galeazzo 2019; Galeazzo and Furlan 2018;…”
BackgroundInfluential
Metadata
- Authors
- Chavez, R., Gimenez, C., Fynes, B., Wiengarten, F., & Yu, W.
- Venue
- International Journal of Operations & Production Management
- Publisher
- Emerald
- Published
- 2013-04-19
- Volume
- 33
- Issue
- 5
- Pages
- 562-588
- ISSN
- 0144-3577 (ISSN-L)
- OpenAlex
- W1518820754
- Cited by
- 148
- References
- 16
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.