The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme
Abstract
The distinct element method as proposed by Cundall and Strack uses the computationally efficient, explicit, central difference time integration scheme. A limitation of this scheme is that it is only conditionally stable, so small time steps must be used. Some researchers have proposed using an implicit time integration scheme to avoid the stability issues arising from the explicit time integrator typically used in these simulations. However, these schemes are computationally expensive and can require a significant number of iterations to form the stiffness matrix that is compatible with the contact state at the end of each time step. In this paper, a new, simple approach for calculating the critical time increment in explicit discrete element simulations is proposed. Using this approach, it is shown that the critical time increment is a function of the current contact conditions. Considering both two‐ and three‐dimensional scenarios, the proposed refined estimates of the critical time step indicate that the earlier recommendations contained in the literature can be unconservative, in that they often overestimate the actual critical time step. A three‐dimensional simulation of a problem with a known analytical solution illustrates the potential for erroneous results to be obtained from discrete element simulations, if the time‐increment exceeds the critical time step for stable analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Golub, G. (2012) · doi:10.56021/9781421407944 · Cited by 34,505
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Zienkiewicz, O. C. (1989) · Cited by 14,802
Nonlinear finite elements for continua and structures
(2001) · Choice Reviews Online · doi:10.5860/choice.38-3926 · Cited by 4,585
The stress-dilatancy relation for static equilibrium of an assembly of particles in contact
Rowe, P. W. (1962) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1962.0193 · Cited by 1,644
Numerical simulations of deviatoric shear deformation of granular media
Thornton, C. (2000) · Géotechnique · doi:10.1680/geot.2000.50.1.43 · Cited by 1,202
Crystallography and crystal defects
(2012) · Choice Reviews Online · doi:10.5860/choice.49-6893 · Cited by 676
Sack, R. L. (1989) · Medical Entomology and Zoology · Cited by 23
Cited by
Assessment of rolling resistance models in discrete element simulations
Ai, J., Chen, J.-F., Rotter, J. M., & Ooi, J. Y. (2011) · Powder Technology · doi:10.1016/j.powtec.2010.09.030 · Cited by 1,073
Meier, C., Weissbach, R., Weinberg, J., Wall, W. A., & Hart, A. J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.10.037 · Cited by 298
A coupled FEM/DEM approach for hierarchical multiscale modelling of granular media
Guo, N., & Zhao, J. (2014) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4702 · Cited by 295
Chrono: An Open Source Multi-physics Dynamics Engine
Tasora, A., Serban, R., Mazhar, H., Pazouki, A., Melanz, D., Fleischmann, J., Taylor, M., Sugiyama, H., & Negrut, D. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-40361-8_2 · Cited by 261
Chen, H., Wei, Q., Wen, S., Li, Z., & Shi, Y. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.08.004 · Cited by 260
Metadata
- Authors
- O'Sullivan, C., & Bray, J. D.
- Venue
- Engineering Computations
- Publisher
- Emerald
- Published
- 2004-03-01
- Volume
- 21
- Issue
- 2/3/4
- Pages
- 278-303
- ISSN
- 0264-4401 (ISSN-L)
- OpenAlex
- W1990063023
- Cited by
- 293
- References
- 8
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme. https://app.cochat.ai/papers/10.1108/02644400410519794
- The paper
- O'Sullivan, C., & Bray, J. D. (2004). Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme. Engineering Computations. https://doi.org/10.1108/02644400410519794
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.