The DOI matches its Crossref record.
New developments in fused deposition modeling of ceramics
Abstract
Purpose: To shift from rapid prototyping (RP) to agile fabrication by broadening the material selection, e.g. using ceramics, hence improving the properties (e.g. mechanical properties) of fused deposition modeling (FDM) products. Design/methodology/approach: This paper presents the development of a novel extrusion system, based on the FDM technology. The new set‐up, consisting of a mini‐extruder mounted on a high‐precision positioning system, is fed with bulk material in granulated form, instead that with the more common filament. Findings: Previous research showed that the applications of new materials with specific characteristics in a commercial FDM system are limited by the use of intermediate precursors, i.e. a filament. The new design described in this paper overcomes the problem thanks to the new feeding system. Research limitations/implications: The work presented in this paper is only the starting point for further development. The new system design was tested and encouraging improvements of the final product were achieved. However, several parameters, e.g. size of the feeding granules, still need to be optimized. Practical implications: This configuration opens up opportunities for the use of wider range of materials, making the FDM to become a viable alternative manufacturing process for specialty products. Originality/value: The mini‐extruder deposition system developed in this study exploits the advantages of the RP technologies: ability to shorten the product design and development time; suitability for automation; and ability to build many geometrically complex shapes. Hence, applying the described technology, it will be possible to manufacture customer‐driven product with important cost and time (from design to final product) savings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Additive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Metadata
- Authors
- Bellini, A., Shor, L., & Guceri, S. I.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2005-09-01
- Volume
- 11
- Issue
- 4
- Pages
- 214-220
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W1978923859
- Cited by
- 216
- References
- 0
- FWCI
- 6.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New developments in fused deposition modeling of ceramics. https://app.cochat.ai/papers/10.1108/13552540510612901
- The paper
- Bellini, A., Shor, L., & Guceri, S. I. (2005). New developments in fused deposition modeling of ceramics. Rapid Prototyping Journal. https://doi.org/10.1108/13552540510612901
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.