Indirect fabrication of collagen scaffold based on inkjet printing technique
The DOI matches its Crossref record.
Abstract
Purpose: This paper presents a new indirect scaffold fabrication method for soft tissue based on rapid prototyping (RP) technique and preliminary characterization for collagen scaffolds. Design/methodology/approach: This paper introduces the processing steps for indirect scaffold fabrication based on the inkjet printing technology. The scaffold morphology was characterized by scanning electron microscopy. The designs of the scaffolds are presented and discussed. Findings: Theoretical studies on the inkjet printing process are presented. Previous research showed that the availability of biomaterial that can be processed on a commercial RP system is very limited. This is due mainly to the unfavorable machine processing parameters such as high working temperature and restrictions on the form of raw material input. The process described in this paper overcomes these problems while retaining the strength of RP techniques. Technical challenges of the process are presented as well. Research limitations/implications: Harnessing the ability of RP techniques to control the internal morphology of the scaffold, it is possible to couple the design of the scaffold with controlled cell‐culture condition to modulate the behavior of the cells. However, this is just initial work, further development will be needed. Practical implications: This method enables the designer to manipulate the scaffold at three different length scales, namely the macroscopic scale, intermediate scale and the cellular scale. Originality/value: The work presented in this paper focuses on important processing steps for indirect scaffold fabrication using thermal‐sensitive natural biomaterial. A mathematical model is proposed to estimate the height of a printed line.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
“Inkjet printing process [97–100] Sodium alginate To build complex tissues composed of multiple cell types (Hydrogel scaffold) Biosensor development, microdeposition of active proteins on cellulose, biochips and acellular polymeric scaffolds”
MethodA Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Self-citationAdditive fabrication technologies applied to medicine and health care: a review
Giannatsis, J., & Dedoussis, V. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1308-1 · Cited by 389
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Self-citation
Metadata
- Authors
- Yeong, W., Chua, C., Leong, K., Chandrasekaran, M., & Lee, M.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2006-08-01
- Volume
- 12
- Issue
- 4
- Pages
- 229-237
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2059301100
- Cited by
- 116
- References
- 0
- FWCI
- 3.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Indirect fabrication of collagen scaffold based on inkjet printing technique. https://app.cochat.ai/papers/10.1108/13552540610682741
- The paper
- Yeong, W., Chua, C., Leong, K., Chandrasekaran, M., & Lee, M. (2006). Indirect fabrication of collagen scaffold based on inkjet printing technique. Rapid Prototyping Journal. https://doi.org/10.1108/13552540610682741
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.