The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Comparison of density measurement techniques for additive manufactured metallic parts
Abstract
Purpose: In the optimisation of processing parameters for additive manufactured parts using, e.g. selective laser melting (SLM) or electron beam melting, the measurement of the part densities is essential and of high interest. However, there is no common standard. Different institutes and system providers are using their own principles and guidelines. This study investigates the accuracies of the three measurement principles: Archimedes method, microscopic analysis of cross sections and X‐ray scanning. Design/methodology/approach: A total of 15 test samples on five density levels (densities between 90 and 99.5 per cent) were produced using the SLM process. The samples are analysed regarding the accuracy of the measurement principles and their reproducibility taking into account influencing parameters like the buoyancy of a sample in air (Archimedes method) or different magnifications of a cross section. Findings: The Archimedes method shows a very high accuracy (±0.08 per cent for high densities) and repeatability (±<0.1 per cent) on all density levels. In contrast to the Archimedes method, taking a micrograph of a specific cross section allows to influence the resulting density and the coefficient of variation reaches values>4 per cent. However, for low porosities, mean densities are comparable to the results of the Archimedes method even though calculated densities are typically somewhat too high. The advantage of the image guided analysis (2D and 3D) is getting more information about the distribution, size and form of pores in the part. Originality/value: The findings do not only refer to metallic parts but generally to all parts having a specific porosity. The study is a contribution to the American Society for Testing and Materials initiative F42 “Additive Manufacturing Technology” and especially to the subcommittee “test methods”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Fundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
The manufacturing of hard tools from metallic powders by selective laser melting
Abe, F., Osakada, K., Shiomi, M., Uematsu, K., & Matsumoto, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00522-2 · Cited by 390
Spierings, A. B., & Levy, G. N. (2009) · doi:10.26153/tsw/15113 · Cited by 193
Self-citationMechanical characterization of porous structures by the combined use of micro-CT and in-situ loading
Kerckhofs, G., Schrooten, J., Elicegui, L., Bael, S. V., Moesen, M., Lomov, S. V., & Wevers, M. (2008) · ORBi (University of Liège) · Cited by 9
Cited by
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Metadata
- Authors
- Spierings, A. B., Schneider, M., & Eggenberger, R.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2011-08-02
- Volume
- 17
- Issue
- 5
- Pages
- 380-386
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W1988871411
- Cited by
- 613
- References
- 5
- FWCI
- 9.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of density measurement techniques for additive manufactured metallic parts. https://app.cochat.ai/papers/10.1108/13552541111156504
- The paper
- Spierings, A. B., Schneider, M., & Eggenberger, R. (2011). Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyping Journal. https://doi.org/10.1108/13552541111156504
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.