The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
Open accessAbstract
The Selective Laser Melting (SLM) process generates large thermal gradients during rapid melting of metallic powdered feedstock. During solidification certain alloys suffer from thermally induced micro-cracking which cannot be eliminated by process optimisation. An alloy’s crack susceptibility may reduce by increasing its Thermal Shock Resistance (TSR), potentially achieved through an increase in tensile strength. This hypothesis is investigated with Hastelloy X, a common nickel-base superalloy of known high crack susceptibility when processing SLM. It is demonstrated that through consideration of the imposed rapid solidification conditions, Hastelloy X can be made to form a supersaturated solid solution in the as deposited state. The fundamental solid solution strengthening (SSS) effect is exploited to generate an increase in lattice stress, by increasing the most potent SSS elements present within the alloy, whilst maintaining specification composition. The modified alloy displayed a 65% reduction in cracking and an increase in elevated temperature tensile strength, lending support to the initial hypothesis and identifying a possible approach for developing further SLM crack resistant versions of well-known alloy compositions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Model for solute redistribution during rapid solidification
Aziz, M. J. (1982) · Journal of Applied Physics · doi:10.1063/1.329867 · Cited by 1,094
Superalloys: A Technical Guide
Donachie, M. J., & Donachie, S. J. (2002) · Cited by 1,055
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
The Theory of Moving Sources of Heat and Its Application to Metal Treatments
Rosenthal, D. (1946) · Journal of Fluids Engineering · doi:10.1115/1.4018624 · Cited by 744
Roberts, I. A., Wang, C., Esterlein, R., et al. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 705
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Alloys-by-design: Application to new superalloys for additive manufacturing
Tang, Y. T., Panwisawas, C., Ghoussoub, J. N., Gong, Y., Clark, J. W. G., Németh, A. A. N., McCartney, D. G., & Reed, R. C. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.09.023 · Cited by 678
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Metadata
- Authors
- Harrison, N. J., Todd, I., & Mumtaz, K.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2015-08
- Volume
- 94
- Pages
- 59-68
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2112485956
- Cited by
- 690
- References
- 19
- FWCI
- 36.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach. https://app.cochat.ai/papers/10.1016/j.actamat.2015.04.035
- The paper
- Harrison, N. J., Todd, I., & Mumtaz, K. (2015). Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach. Acta Materialia. https://doi.org/10.1016/j.actamat.2015.04.035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.