The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process
Abstract
Purpose: Binder jetting (BJ) process is an additive manufacturing (AM) process in which powder materials are selectively joined by binder materials. Products can be manufactured layer-by-layer directly from three-dimensional model data. The quality properties of the products fabricated by the BJ AM process are significantly affected by the process parameters. To improve the product quality, the optimal process parameters need to be identified and controlled. This research works with the 420 stainless steel powder material. Design/methodology/approach: This study focuses on four key printing parameters and two end-product quality properties. Sixteen groups of orthogonal experiment designed by the Taguchi method are conducted, and then the results are converted to signal-to-noise ratios and analyzed by analysis of variance. Findings: Five sets of optimal parameters are concluded and verified by four group confirmation tests. Finally, by taking the optimal parameters, the end-product quality properties are significantly improved. Originality/value: These optimal parameters can be used as a guideline for selecting proper printing parameters in BJ to achieve the desired properties and help to improve the entire BJ process ability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design optimization of cutting parameters for turning operations based on the Taguchi method
Yang, W. H., & Tarng, Y. S. (1998) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(98)00079-x · Cited by 1,302
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Jaisingh Sheoran, A., & Kumar, H. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2019.11.296 · Cited by 342
Metadata
- Authors
- Chen, H., & Zhao, Y. F.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2016-04-18
- Volume
- 22
- Issue
- 3
- Pages
- 527-538
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2297981365
- Cited by
- 204
- References
- 1
- FWCI
- 9.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process. https://app.cochat.ai/papers/10.1108/rpj-11-2014-0149
- The paper
- Chen, H., & Zhao, Y. F. (2016). Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-11-2014-0149
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.