CoChat

Computation of the relativistic rate shift of a frequency standard

Petit, G., Wolf, P. · 1997 · IEEE Transactions on Instrumentation and Measurement
Cited by 23

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

Comparison of the frequencies of distant primary standards calls for the computation of their relativistic rate shift (gravitational+second-order Doppler shift) with an uncertainty lower than that implied by the accuracy of the standards. This computation is also required when using primary frequency standards to establish an accurate coordinate time, as in the case of the International Atomic Time TAI. The problem is addressed at several levels of uncertainty, valid for present and future primary standards. It is shown that, for clocks on Earth, the computation is easily performed with an uncertainty of a few parts in 10/sup 16/, but is ultimately limited to a few parts in 10/sup 17/, due to geophysical effects which presently cannot be modeled with smaller uncertainty. For clocks on board satellites, these limitations are less significant and an uncertainty of 10/sup -18/ is attainable, while on board moving vehicles close to the Earth an uncertainty of 10/sup -16/ could be reached.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/19.571812

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 13

  1. 10.1109/19.377788 · doi:10.1109/19.377788
  2. heindorff, 1995, the ptb primary clock cs3, Proc Symp Frequency Standards and Metrology, 413
  3. clairon, 1996, the lptf preliminary accuracy evaluation of cesium fountain frequency standard, Proceedings of 10th International Conference on European Frequency and Time, 218, 10.1049/cp:19960049 · DOI
  4. maleki, 1993, frequency standards from government laboratories over the next 25 years, Proc 25th PTTI Meet, 3267, 549
  5. vanicek, 1986, Geodesy The Concepts
  6. 1990, technical characteristics of the navstar gps, NATO Standardization Agreement (STANAG) 4294
  7. torge, 1989, Gravimetry
  8. bursa, 1995, report of the special commission sc3 fundamental constants, Travaux de l Association Internationale de Ge´ ode´ sie, 370
  9. lerch, 1992, geopotential models of the earth from satellite tracking, altimeter and surface gravity observations: gem-t3 and gem-t3s, NASA Tech Memo 104555
  10. 10.1007/s001900050038 · DOI
  11. wolf, 1995, relativistic theory for clock syntonization and the realization of geocentric coordinate times, Astron Astrophys, 304, 653
  12. 1991, international astronomical union resolution a4, IAU Trans, xxib
  13. milbert, 1992, gps and geoid90—the new level rod, GPS World, 38

Cited by

See all 23

Metadata

Authors
Petit, G., & Wolf, P.
Venue
IEEE Transactions on Instrumentation and Measurement
Published
1997-04
Volume
46
Issue
2
Pages
201-204
ISSN
0018-9456 (ISSN-L)
OpenAlex
W2119683026
Cited by
23
References
2
FWCI
0.50
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.