The DOI matches its Crossref record.
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Abstract
Recent developments in high energy magnets have created widespread interest in the area of permanent magnet (PM) motors. The use of PM synchronous motors or brushless motors to replace conventional DC or induction type motors has not been as speedy as anticipated earlier. This paper deals with the temperature effects of PM motors using neodymium magnets on the torque production capability and on the efficiency of the motor. When PM motors are designed to operate in a wide temperature range, the reversible demagnetization of the neodymium magnets with temperature and the increase in winding resistance with temperature influence the maximum torque capability at rated speed and efficiency of the PM motor. The maximum torque at rated speed is limited due to the fixed DC link voltage of the inverter feeding the motor. In this paper, it is shown that over an operating range of -40/spl deg/C to 150/spl deg/C the maximum torque capability and efficiency of the motor can vary over a wide range. It is also shown that for certain designs, a near flat maximum torque versus temperature characteristic may be obtained. The major factors influencing these variations are identified. The discussion in this paper is concentrated on PM motors with a trapezoidal back EMF waveform. The idea could be extended to sinusoidal back EMF motors and to PM DC motors.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Mohamed, Y. A.-R. I. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895074 · Cited by 324
Nonlinear control of interior permanent-magnet synchronous motor
Rahman, M. A., Vilathgamuwa, D. M., Uddin, M. N., & Tseng, K.-J. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808932 · Cited by 303
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Metadata
- Authors
- Sebastian, T.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1995
- Volume
- 31
- Issue
- 2
- Pages
- 353-357
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W4254212786
- Cited by
- 246
- References
- 0
- FWCI
- 0.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Temperature effects on torque production and efficiency of PM motors using NdFeB magnets. https://app.cochat.ai/papers/10.1109/28.370284
- The paper
- Sebastian, T. (1995). Temperature effects on torque production and efficiency of PM motors using NdFeB magnets. IEEE Transactions on Industry Applications. https://doi.org/10.1109/28.370284
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.