The DOI matches its Crossref record.
Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems
Abstract
In this paper, filtering techniques are investigated to reduce the motor terminal overvoltage, ringing, and dv/dt in inverter-fed AC motor drive systems where long leads are required. Analysis is presented to show that the distributed LC of a cable and the pulse-width modulated (PWM) inverter switching action lead to motor terminal voltage reflections and ringing that stress the turn insulation and contribute to bearing currents. First- and second-order shunt filter designs are analyzed and compared. Detailed design equations to match the filter impedance to the cable surge impedance and to determine the filter component values are presented. It is demonstrated that a first-order shunt filter connected at the motor terminals significantly reduces the overvoltage stress and ringing, and also lowers the dv/dt of the PWM switching pulse. Simulation and experimental results are presented to verify the proposed filter designs for 50-ft and 100-ft cable lengths for 460-V PWM insulated gate bipolar transistor (IGBT) AC motor drive systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Teichmann, R., & Bernet, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847285 · Cited by 578
An active circuit for cancellation of common-mode voltage generated by a PWM inverter
Ogasawara, S., Ayano, H., & Akagi, H. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.712285 · Cited by 394
Metadata
- Authors
- von Jouanne, A., Rendusara, D. A., Enjeti, P. N., & Gray, J. W.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1996
- Volume
- 32
- Issue
- 4
- Pages
- 919-926
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W4248986441
- Cited by
- 179
- References
- 0
- FWCI
- 6.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems. https://app.cochat.ai/papers/10.1109/28.511650
- The paper
- von Jouanne, A., Rendusara, D. A., Enjeti, P. N., & Gray, J. W. (1996). Filtering techniques to minimize the effect of long motor leads on PWM inverter-fed AC motor drive systems. IEEE Transactions on Industry Applications. https://doi.org/10.1109/28.511650
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.