The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Quantitative evaluation of induction motor broken bars by means of electrical signature analysis
Open accessAbstract
The paper reports the comparison and performance evaluation of different diagnostic procedures that use input electric signals to detect and quantify rotor breakage in induction machines supplied by the mains. Besides the traditional current signature analysis based on one-phase current spectrum lines at frequencies (1/spl plusmn/2s)f, the procedures based on analysis of the line at frequency 2sf in the spectrum respectively of electromagnetic torque, space vector current modulus and instantaneous power are considered. These last procedures have similar features and the comparison is developed on the basis of instantaneous torque. It is addressed that the speed ripple introduces two further terms in the instantaneous torque, decreasing the accuracy of the diagnosis. It is shown that there is a link between the angular displacement of the current sideband components at frequencies (1/spl plusmn/2s)f. This allows a more correct quantitative evaluation of the fault and shows the superiority of the side band current components diagnostic procedure over the other proposed methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
AI techniques in induction machines diagnosis including the speed ripple effect
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.658729 · Cited by 442
Self-citationMethods of Motor Current Signature Analysis
Kliman, G. B., & Stein, J. (1992) · Electric Machines & Power Systems · doi:10.1080/07313569208909609 · Cited by 330
Self-citationAn unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
Monitoring of defects in induction motors through air-gap torque observation
Hsu, J. S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464514 · Cited by 217
Schoen, R. R., & Habetler, T. G. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.649970 · Cited by 154
Filippetti, F., Martelli, M., Franceschini, G., et al. (2003) · doi:10.1109/ias.1992.244459 · Cited by 149
Self-citationSchoen, R. R., & Habetler, T. G. (2002) · Conference record · doi:10.1109/ias.1996.557108 · Cited by 143
Cited by
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Metadata
- Authors
- Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2001
- Volume
- 37
- Issue
- 5
- Pages
- 1248-1255
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W1904958519
- Cited by
- 483
- References
- 7
- FWCI
- 29.55
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative evaluation of induction motor broken bars by means of electrical signature analysis. https://app.cochat.ai/papers/10.1109/28.952499
- The paper
- Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B. (2001). Quantitative evaluation of induction motor broken bars by means of electrical signature analysis. IEEE Transactions on Industry Applications. https://doi.org/10.1109/28.952499
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.