Stator Winding Monitoring
The DOI matches its Crossref record.
Abstract
Partial discharge tests can determine which motor and generator stator windings are experiencing insulation problems. A deteriorated winding has a PD activity which can be 30 times or more higher than a winding in good condition. This great difference in PD activity enables even nonspecialized maintenance personnel to identify the few motors or generators in a company which need further investigation and/or maintenance. There are several advantages to on-line partial discharge tests. Machines in good condition require less attention. The overall effect is lower maintenance costs. After implementing on-line partial discharge tests, as well as other monitoring such as flux probing or current harmonic analysis and improved temperature sensing, companies can often confidently extend the outage between major machine inspections. This saves on outage costs and reduces the risk of a stator fault due to human error during maintenance. Finally, on older machines, if there has been no increase in partial discharge activity over time, then the life of the stator winding can be confidently extended, saving a considerable capital expenditure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Metadata
- Authors
- Stone, G., & Kapler, J.
- Venue
- IEEE Industry Applications Magazine
- Published
- 1998-09
- Volume
- 4
- Issue
- 5
- Pages
- 15-20
- ISSN
- 1077-2618 (ISSN-L)
- 1558-0598
- OpenAlex
- W1978067281
- Cited by
- 99
- References
- 0
- FWCI
- 0.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stator Winding Monitoring. https://app.cochat.ai/papers/10.1109/2943.715501
- The paper
- Stone, G., & Kapler, J. (1998). Stator Winding Monitoring. IEEE Industry Applications Magazine. https://doi.org/10.1109/2943.715501
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.