The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems
Abstract
A breakdown of the electrical insulation system causes catastrophic failure of the electrical machine and brings large process downtime losses. To determine the conditions of the stator insulation system of motor drive systems, various testing and monitoring methods have been developed. This paper presents an in-depth literature review of testing and monitoring methods, categorizing them into online and offline methods, each of which is further grouped into specific areas according to their physical nature. The main focus of this paper is on testing and monitoring techniques that diagnose the condition of the turn-to-turn insulation of low-voltage machines, which is a rapidly expanding area for both research and product development efforts. In order to give a compact overview, the results are summarized in two tables. In addition to monitoring methods on turn-to-turn insulation, some of the most common methods to assess the stator's phase-to-ground and phase-to-phase insulation conditions are included in the tables as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors
Bonnett, A. H., & Soukup, G. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148460 · Cited by 593
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
Condition monitoring and fault diagnosis of electrical machines-a review
Nandi, S., & Toliyat, H. A. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.799956 · Cited by 531
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors
Bonnett, A. K., & Soukup, G. C. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239667 · Cited by 489
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair
Stone, G. C., Culbert, I., Boulter, E. A., & Dhirani, H. (2014) · doi:10.1002/9781118886663 · Cited by 453
AI techniques in induction machines diagnosis including the speed ripple effect
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.658729 · Cited by 442
Cited by
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Survey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Kim, K.-H. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2060463 · Cited by 184
Haje Obeid, N., Battiston, A., Boileau, T., & Nahid-Mobarakeh, B. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2743419 · Cited by 98
Metadata
- Authors
- Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-12
- Volume
- 55
- Issue
- 12
- Pages
- 4127-4136
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2117171612
- Cited by
- 490
- References
- 62
- FWCI
- 27.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems. https://app.cochat.ai/papers/10.1109/tie.2008.2004665
- The paper
- Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008). A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2008.2004665
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
