The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Extreme ultraviolet lithography
Abstract
Current microlithography used in high-volume integrated circuit manufacturing employs some form of optical projection technology. The most advanced tools use deep-ultraviolet (DUV) radiation having a wavelength of 248 nm and are used to print 250-nm features. These tools will likely be extended for use at the 180-nm generation and perhaps below. New DUV tools using 193-nm radiation are actively under development and are expected to be used for 130-nm generation and perhaps even 100-nm generation. Extending these DUV optical projection tools for manufacturing in the 100-200-nm region will be paced by the development of new high numerical aperture imaging systems and highly complex phase shift masks. For future generations of integrated circuits with minimum feature sizes below 100 nm, 193-nm tools will have great difficulty meeting all manufacturing requirements. This paper describes an alternate optical approach, for sub-100-nm generations, based on extreme ultraviolet radiation at around 13 nm, called extreme ultraviolet lithography (EUVL). This approach uses a laser-produced plasma source of radiation, a reflective mask, and a 4/spl times/ reduction all-reflective imaging system. The technology is currently in the engineering development phase for an alpha machine. This paper reviews its current status and describes the basic modules or building blocks of a generic EUVL exposure tool.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Soft x-ray reduction lithography using multilayer mirrors
Kinoshita, H., Kurihara, K., Ishii, Y., & Torii, Y. (1989) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.584507 · Cited by 270
Reduction imaging at 14 nm using multilayer-coated optics: Printing of features smaller than 0.1 μm
Bjorkholm, J. E., Bokor, J., Eichner, L., Freeman, R. R., Gregus, J., Jewell, T. E., Mansfield, W. M., Mac Dowell, A. A., Raab, E. L., Silfvast, W. T., et al. (1990) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.585106 · Cited by 161
Cited by
Gale, B. K., Jafek, A. R., Lambert, C. J., Goenner, B. L., Moghimifam, H., Nze, U. C., & Kamarapu, S. K. (2018) · Inventions · doi:10.3390/inventions3030060 · Cited by 511
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Metadata
- Authors
- Stulen, R. H., & Sweeney, D. W.
- Venue
- IEEE Journal of Quantum Electronics
- Published
- 1999-05
- Volume
- 35
- Issue
- 5
- Pages
- 694-699
- ISSN
- 0018-9197 (ISSN-L)
- OpenAlex
- W2104212315
- Cited by
- 196
- References
- 2
- FWCI
- 11.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extreme ultraviolet lithography. https://app.cochat.ai/papers/10.1109/3.760315
- The paper
- Stulen, R. H., & Sweeney, D. W. (1999). Extreme ultraviolet lithography. IEEE Journal of Quantum Electronics. https://doi.org/10.1109/3.760315
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.