The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Heat sink optimization with application to microchannels
Abstract
The equations governing the fluid dynamics and combined conduction/convection heat transfer in a heat sink are presented in dimensionless form for both laminar and turbulent flow. A scheme presented for solving these equations permits the determination of heat sink dimensions that display the lowest thermal resistance between the hottest portion of the heat sink and the incoming fluid. Results from the present method are applied to heat sinks reported by previous investigators to study effects of their restrictions regarding the nature of the flow (laminar or turbulent), the ratio of fin thickness to channel width, or the aspect ratio of the fluid channel. Results indicate that when the pressure drop through the channels is small, laminar solutions yield lower thermal resistance than turbulent solutions. Conversely, when the pressure drop is large, the optimal thermal resistance is found in the turbulent region. With the relaxation of these constraints, configurations and dimensions found using the present procedure produce significant improvement in thermal resistance over those presented by all three previous studies.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of heat and mass transfer
Larkin, A. V. (2018) · BSU Digital Library (Belarusian State University) · Cited by 8,034
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
New equations for heat and mass transfer in turbulent pipe and channel flow
Gnielinski, V. (1976) · Medical Entomology and Zoology · Cited by 4,037
(1999) · Cryogenic Heat Transfer · doi:10.1201/b15230-9 · Cited by 3,534
Handbook of Single-Phase Convective Heat Transfer
Martin, H. (1988) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(88)87007-7 · Cited by 1,620
Handbook of single-phase convective heat transfer
Kakaç, S., Shah, R. K., & Aung, W. (1987) · Wiley eBooks · Cited by 1,358
Optimal Thermal Design of Forced Convection Heat Sinks-Analytical
Knight, R. W., Goodling, J. S., & Hall, D. J. (1991) · Journal of Electronic Packaging · doi:10.1115/1.2905412 · Cited by 218
Self-citationHeat-transfer microstructures for integrated circuits
Tuckerman, D. B. (1984) · Cited by 214
Narrow Channel Forced Air Heat Sink
Goldberg, N. (1984) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/tchmt.1984.1136326 · Cited by 82
VLSI Packaging Technique Using Liquid-Cooled Channels
KISHIMOTO, T., & Ohsaki, T. (1986) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/tchmt.1986.1136661 · Cited by 75
Cited by
Qu, W., & Mudawar, I. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00337-4 · Cited by 1,033
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Recent advances in application of nanofluids in heat transfer devices: A critical review
Sajid, M. U., & Ali, H. M. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.057 · Cited by 544
Forced convective heat transfer across a pin fin micro heat sink
Peles, Y., Koşar, A., Mishra, C., Kuo, C.-J., & Schneider, B. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.03.017 · Cited by 473
Heat and fluid flow in high-power LED packaging and applications
Luo, X., Hu, R., Liu, S., & Wang, K. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.05.003 · Cited by 460
Optimization of thermal design of heat sinks: A review
Ahmed, H. E., Salman, B. H., Kherbeet, A. S., & Ahmed, M. I. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.099 · Cited by 452
Lin, L., Zhao, J., Lu, G., Wang, X.-D., & Yan, W.-M. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.05.013 · Cited by 356
Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
Dixit, T., & Ghosh, I. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.024 · Cited by 339
Development of heat sink device by using topology optimization
Koga, A. A., Lopes, E. C. C., Villa Nova, H. F., Lima, C. R. D., & Silva, E. C. N. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.05.007 · Cited by 320
High Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities
Kandlikar, S. G. (2005) · Heat Transfer Engineering · doi:10.1080/01457630591003655 · Cited by 282
Forced air cooling by using manifold microchannel heat sinks
Kim, Y. H., Chun, W. C., Kim, J. T., Pak, B. C., & Baek, B. J. (1998) · KSME International Journal · doi:10.1007/bf02945732 · Cited by 58
Nonneman, J., TrJollyn, I., Clarie, N., Weckx, S., Sergeant, P., & De Paepe, M. (2018) · 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2018.8419541 · Cited by 13
Metadata
- Authors
- Knight, R. W., Hall, D. J., Goodling, J. S., & Jaeger, R. C.
- Venue
- IEEE Transactions on Components, Hybrids, and Manufacturing Technology
- Published
- 1992
- Volume
- 15
- Issue
- 5
- Pages
- 832-842
- ISSN
- 0148-6411 (ISSN-L)
- OpenAlex
- W2126249528
- Cited by
- 409
- References
- 10
- FWCI
- 4.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.