The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Spatial reasoning for the automatic recognition of machinable features in solid models
Abstract
Discusses an automatic feature recognizer that decomposes the total volume to be machined into volumetric features that satisfy stringent conditions for manufacturability, and correspond to operations typically performed in 3-axis machining centers. Unlike most of the previous research, the approach is based on general techniques for dealing with features with intersecting volumes. Feature interactions are represented explicitly in the recognizer's output, to facilitate spatial reasoning in subsequent planning stages. A generate-and-test strategy is used. OPS-5 production rules generate hints or clues for the existence of features, and post them on a blackboard. The clues are assessed, and those judged promising are processed to ensure that they correspond to actual features, and to gather information for process planning. Computational geometry techniques are used to produce the largest volumetric feature compatible with the available data. The feature's accessibility, and its interactions with others are analyzed. The validity tests ensure that the proposed features are accessible, do not intrude into the desired part, and satisfy other machinability conditions. The process continues until it produces a complete decomposition of the volume to be machined into fully-specified features.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Representations for Rigid Solids: Theory, Methods, and Systems
Requicha, A. G. (1980) · ACM Computing Surveys · doi:10.1145/356827.356833 · Cited by 1,436
Self-citationA blackboard architecture for control
Hayes-Roth, B. (1985) · Artificial Intelligence · doi:10.1016/0004-3702(85)90063-3 · Cited by 1,138
GPS : a case study in generality and problem solving
Ernst, G. W., & Newell, A. (1969) · Cited by 503
Boolean operations in solid modeling: Boundary evaluation and merging algorithms
Requicha, A. A. G., & Voelcker, H. B. (1985) · Proceedings of the IEEE · doi:10.1109/proc.1985.13108 · Cited by 307
Self-citationSet Membership Classification: A Unified Approach to Geometric Intersection Problems
Tilove (1980) · IEEE Transactions on Computers · doi:10.1109/tc.1980.1675470 · Cited by 294
Geometric reasoning for recognition of three-dimensional object features
Marefat, M., & Kashyap, R. L. (1990) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.58868 · Cited by 171
Brown (1982) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.1982.1674167 · Cited by 164
Feature extraction from boundary models of three-dimensional objects
Floriani, L. D. (1989) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.31442 · Cited by 119
Spyridi, A. J., & Requicha, A. A. G. (2002) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.1990.126176 · Cited by 117
Self-citation(1986) · doi:10.1609/aimag.v7i2.537
Cited by
Topology matching for fully automatic similarity estimation of 3D shapes
Hilaga, M., Shinagawa, Y., Kohmura, T., & Kunii, T. L. (2001) · Proceedings of the 28th annual conference on Computer graphics and interactive techniques · doi:10.1145/383259.383282 · Cited by 2,187
Manufacturing feature recognition from solid models: a status report
Han, J., Pratt, M., & Regli, W. C. (2000) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.897789 · Cited by 279
Metadata
- Authors
- Vandenbrande, J. H., & Requicha, A. A. G.
- Venue
- IEEE Transactions on Pattern Analysis and Machine Intelligence
- Published
- 1993
- Volume
- 15
- Issue
- 12
- Pages
- 1269-1285
- ISSN
- 0162-8828 (ISSN-L)
- OpenAlex
- W2105687228
- Cited by
- 316
- References
- 10
- FWCI
- 35.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Spatial reasoning for the automatic recognition of machinable features in solid models. https://app.cochat.ai/papers/10.1109/34.250845
- The paper
- Vandenbrande, J. H., & Requicha, A. A. G. (1993). Spatial reasoning for the automatic recognition of machinable features in solid models. IEEE Transactions on Pattern Analysis and Machine Intelligence. https://doi.org/10.1109/34.250845
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.