The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners
Abstract
In the boreal forest zone and in many forest areas, there exist gaps between the forest crowns. For example, in Finland, more than 30% of the first pulse data of laser scanning reflect directly from the ground without any interaction with the canopy. By increasing the number of pulses, it is possible to have samples from each individual tree and also from the gaps between the trees. Basically, this means that several laser pulses can be recorded per m/sup 2/. This allows detailed investigation of forest areas and the creation of a three-dimensional (3D) tree height model. Tree height model can be calculated from the digital terrain and crown models both obtained with the laser scanner data. By analyzing the 3D tree height model by using image vision methods, e.g., segmentation, it is possible to locate individual trees, estimate individual tree heights, crown area, and, by using that data, to derive the stem diameter, number of stems, basal area, and stem volume. The advantage of the method is the capability to measure directly physical dimensions from the trees and use that information to calculate the needed stand attributes. This paper demonstrates for the first time that it is possible to accurately estimate standwise forest attributes, especially stem volume (biomass), using high-pulse-rate laser scanners to provide data, from which individual trees can be detected and characteristics of trees such as height, location, and crown dimensions can be determined. That information can be applied to provide estimates for larger areas (stands). Using the new method, the following standard errors were demonstrated for mean height, basal area and stem volume: 1.8 m (9.9%), 2.0 m/sup 2//ha (10.2%), and 18.5 m/sup 3//ha (10.5%), respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Taper curve and volume functions for pine, spruce and birch.
Laasasenaho, J. (1982) · Jukuri (Natural Resources Institute Finland (Luke)) · Cited by 578
Estimating timber volume of forest stands using airborne laser scanner data
Næsset, E. (1997) · Remote Sensing of Environment · doi:10.1016/s0034-4257(97)00041-2 · Cited by 543
Estimating forest biomass and volume using airborne laser data
Nelson, R., Krabill, W., & Tonelli, J. (1988) · Remote Sensing of Environment · doi:10.1016/0034-4257(88)90028-4 · Cited by 400
Brandtberg, T., & Walter, F. (1998) · Machine Vision and Applications · doi:10.1007/s001380050091 · Cited by 215
Stem number estimation by kernel smoothing of aerial photos
Dralle, K., & Rudemo, M. (1996) · Canadian Journal of Forest Research · doi:10.1139/x26-137 · Cited by 142
Cited by
Isolating Individual Trees in a Savanna Woodland Using Small Footprint Lidar Data
Chen, Q., Baldocchi, D., Gong, P., & Kelly, M. (2006) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.72.8.923 · Cited by 589
Seeing the Trees in the Forest
Popescu, S. C., & Wynne, R. H. (2004) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.70.5.589 · Cited by 589
Identifying species of individual trees using airborne laser scanner
Holmgren, J., & Persson, Å. (2004) · Remote Sensing of Environment · doi:10.1016/s0034-4257(03)00140-8 · Cited by 544
Morsdorf, F., Kötz, B., Meier, E., Itten, K. I., & Allgöwer, B. (2006) · Remote Sensing of Environment · doi:10.1016/j.rse.2006.04.019 · Cited by 470
UAV lidar and hyperspectral fusion for forest monitoring in the southwestern USA
Sankey, T., Donager, J., McVay, J., & Sankey, J. B. (2017) · Remote Sensing of Environment · doi:10.1016/j.rse.2017.04.007 · Cited by 447
Brandtberg, T. (2003) · Remote Sensing of Environment · doi:10.1016/s0034-4257(03)00008-7 · Cited by 430
A review of remote sensing for mangrove forests: 1956–2018
Wang, L., Jia, M., Yin, D., & Tian, J. (2019) · Remote Sensing of Environment · doi:10.1016/j.rse.2019.111223 · Cited by 415
Morsdorf, F., Meier, E., Kötz, B., Itten, K. I., Dobbertin, M., & Allgöwer, B. (2004) · Remote Sensing of Environment · doi:10.1016/j.rse.2004.05.013 · Cited by 406
Korhonen, L., Korpela, I., Heiskanen, J., & Maltamo, M. (2011) · Remote Sensing of Environment · doi:10.1016/j.rse.2010.12.011 · Cited by 381
Näsi, R., Honkavaara, E., Lyytikäinen-Saarenmaa, P., Blomqvist, M., Litkey, P., Hakala, T., Viljanen, N., Kantola, T., Tanhuanpää, T., & Holopainen, M. (2015) · Remote Sensing · doi:10.3390/rs71115467 · Cited by 381
Tree‐centric mapping of forest carbon density from airborne laser scanning and hyperspectral data
Dalponte, M., & Coomes, D. A. (2016) · Methods in Ecology and Evolution · doi:10.1111/2041-210x.12575 · Cited by 379
Comparative testing of single-tree detection algorithms under different types of forest
Vauhkonen, J., Ene, L., Gupta, S., Heinzel, J., Holmgren, J., Pitkanen, J., Solberg, S., Wang, Y., Weinacker, H., Hauglin, K. M., et al. (2012) · Forestry · doi:10.1093/forestry/cpr051 · Cited by 377
Yu, X., Hyyppä, J., Vastaranta, M., Holopainen, M., & Viitala, R. (2011) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2010.08.003 · Cited by 373
3D lidar imaging for detecting and understanding plant responses and canopy structure
Omasa, K., Hosoi, F., & Konishi, A. (2006) · Journal of Experimental Botany · doi:10.1093/jxb/erl142 · Cited by 354
Generating pit-free canopy height models from airborne lidar
Khosravipour, A., Skidmore, A. K., Isenburg, M., Wang, T., & Hussin, Y. A. (2014) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.80.9.863 · Cited by 347
A voxel-based lidar method for estimating crown base height for deciduous and pine trees
Popescu, S. C., & Zhao, K. (2008) · Remote Sensing of Environment · doi:10.1016/j.rse.2007.06.011 · Cited by 346
A low-cost multi-sensoral mobile mapping system and its feasibility for tree measurements
Jaakkola, A., Hyyppä, J., Kukko, A., Yu, X., Kaartinen, H., Lehtomäki, M., & Lin, Y. (2010) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2010.08.002 · Cited by 339
Combined high-density lidar and multispectral imagery for individual tree crown analysis
Leckie, D., Gougeon, F., Hill, D., Quinn, R., Armstrong, L., & Shreenan, R. (2003) · Canadian Journal of Remote Sensing · doi:10.5589/m03-024 · Cited by 331
Yao, W., Krzystek, P., & Heurich, M. (2012) · Remote Sensing of Environment · doi:10.1016/j.rse.2012.03.027 · Cited by 324
Holmgren, J., Persson, Å., & Söderman, U. (2008) · International Journal of Remote Sensing · doi:10.1080/01431160701736471 · Cited by 319
Yu, X., Hyyppä, J., Kaartinen, H., & Maltamo, M. (2004) · Remote Sensing of Environment · doi:10.1016/j.rse.2004.02.001 · Cited by 314
Guimarães, N., Pádua, L., Marques, P., Silva, N., Peres, E., & Sousa, J. J. (2020) · Remote Sensing · doi:10.3390/rs12061046 · Cited by 295
Riaño, D. (2003) · Remote Sensing of Environment · doi:10.1016/s0034-4257(03)00098-1 · Cited by 293
Quantifying forest above ground carbon content using LiDAR remote sensing
Patenaude, G., Hill, R. A., Milne, R., Gaveau, D. L. A., Briggs, B. B. J., & Dawson, T. P. (2004) · Remote Sensing of Environment · doi:10.1016/j.rse.2004.07.016 · Cited by 282
Solberg, S., Naesset, E., & Bollandsas, O. M. (2006) · Photogrammetric Engineering & Remote Sensing · doi:10.14358/pers.72.12.1369 · Cited by 269
Silva, C. A., Hudak, A. T., Vierling, L. A., Loudermilk, E. L., O’Brien, J. J., Hiers, J. K., Jack, S. B., Gonzalez-Benecke, C., Lee, H., Falkowski, M. J., et al. (2016) · Canadian Journal of Remote Sensing · doi:10.1080/07038992.2016.1196582 · Cited by 269
Gaveau, D. L. A., & Hill, R. A. (2003) · Canadian Journal of Remote Sensing · doi:10.5589/m03-023 · Cited by 267
Segmenting tree crowns from terrestrial and mobile LiDAR data by exploring ecological theories
Tao, S., Wu, F., Guo, Q., Wang, Y., Li, W., Xue, B., Hu, X., Li, P., Tian, D., Li, C., et al. (2015) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2015.10.007 · Cited by 257
Prediction of understory vegetation cover with airborne lidar in an interior ponderosa pine forest
Wing, B. M., Ritchie, M. W., Boston, K., Cohen, W. B., Gitelman, A., & Olsen, M. J. (2012) · Remote Sensing of Environment · doi:10.1016/j.rse.2012.06.024 · Cited by 150
Metadata
- Authors
- Hyyppa, J., Kelle, O., Lehikoinen, M., & Inkinen, M.
- Venue
- IEEE Transactions on Geoscience and Remote Sensing
- Published
- 2001-05
- Volume
- 39
- Issue
- 5
- Pages
- 969-975
- ISSN
- 0196-2892 (ISSN-L)
- OpenAlex
- W2161746820
- Cited by
- 752
- References
- 5
- FWCI
- 21.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.