The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Iterative feedback tuning: theory and applications
Abstract
We have examined an optimization approach to iterative control design. The important ingredient is that the gradient of the design criterion is computed from measured closed loop data. The approach is thus not model-based. The scheme converges to a stationary point of the design criterion under the assumption of boundedness of the signals in the loop. From a practical viewpoint, the scheme offers several advantages. It is straightforward to apply. It is possible to control the rate of change of the controller in each iteration. The objective can be manipulated between iterations in order to tighten or loosen performance requirements. Certain frequency regions can be emphasized if desired. This direct optimal tuning algorithm is particularly well suited for the tuning of the basic control loops in the process industry, which are typically PID loops. These primary loops are often very badly tuned, making the application of more advanced (for example, multivariable) techniques rather useless. A first requirement in the successful application of advanced control techniques is that the primary loops be tuned properly. This new technique appears to be a very practical way of doing this, with an almost automatic procedure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
System Identification: Theory for the User
Lennart Ljung, A. (1987) · Cited by 17,690
A Stochastic Approximation Method
Robbins, H., & Monro, S. (1951) · The Annals of Mathematical Statistics · doi:10.1214/aoms/1177729586 · Cited by 9,643
PID Controllers: Theory, Design, and Tuning
Åström, K. J., & Hägglund, T. J. (1995) · Lund University Publications (Lund University) · Cited by 4,741
Theory and Practice of Recursive Identification
Lennart Ljung, A., & Söderström, T. (1983) · Lund University Publications (Lund University) · Cited by 3,989
The unfalsified control concept and learning
Safonov, M. G., & Tsao, T.-C. (1997) · IEEE Transactions on Automatic Control · doi:10.1109/9.587340 · Cited by 595
A convergent iterative restricted complexity control design scheme
Hjalmarsson, H., Gunnarsson, S., & Gevers, M. (2002) · Proceedings of 1994 33rd IEEE Conference on Decision and Control · doi:10.1109/cdc.1994.411185 · Cited by 320
Optimal experiment designs with respect to the intended model application
Gevers, M., & Ljung, L. (1986) · Automatica · doi:10.1016/0005-1098(86)90064-6 · Cited by 274
Adaptive control based on explicit criterion minimization
Trulsson, E., & Lennart Ljung, A. (1985) · Automatica · doi:10.1016/0005-1098(85)90075-5 · Cited by 108
Control of nonlinear systems using iterative feedback tuning
Hjalmarsson, H. (1998) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.1998.702994 · Cited by 84
Model-free Tuning of a Robust Regulator for a Flexible Transmission System
Hjalmarsson, H., Gunnarsson, S., & GEVERS, M. R. (1995) · European Journal of Control · doi:10.1016/s0947-3580(95)70018-8 · Cited by 71
Cited by
From model-based control to data-driven control: Survey, classification and perspective
Hou, Z.-S., & Wang, Z. (2013) · Information Sciences · doi:10.1016/j.ins.2012.07.014 · Cited by 1,405
Virtual reference feedback tuning: a direct method for the design of feedback controllers
Campi, M. C., Lecchini, A., & Savaresi, S. M. (2002) · Automatica · doi:10.1016/s0005-1098(02)00032-8 · Cited by 1,110
Handbook of Pi and Pid Controller Tuning Rules
O’Dwyer, A. (2006) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/9781860949104 · Cited by 1,015
Formulas for Data-Driven Control: Stabilization, Optimality, and Robustness
De Persis, C., & Tesi, P. (2020) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2019.2959924 · Cited by 983
A Novel Data-Driven Control Approach for a Class of Discrete-Time Nonlinear Systems
Hou, Z., & Jin, S. (2011) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2010.2093136 · Cited by 796
Metadata
- Venue
- IEEE Control Systems
- Published
- 1998-08
- Volume
- 18
- Issue
- 4
- Pages
- 26-41
- ISSN
- 1066-033X (ISSN-L)
- 1941-000X
- OpenAlex
- W2038436774
- Cited by
- 994
- References
- 10
- FWCI
- 28.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.