The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A 10 b, 20 Msample/s, 35 mW pipeline A/D converter
Abstract
This paper describes a 10 b, 20 Msample/s pipeline A/D converter implemented in 1.2 /spl mu/m CMOS technology which achieves a power dissipation of 35 mW at full speed operation. Circuit techniques used to achieve this level of power dissipation include digital correction to allow the use of dynamic comparators, and optimum scaling of capacitor values through the pipeline. Also, to be compatible with low voltage mixed-signal system environments, a switched capacitor (SC) circuit in each pipeline stage is implemented and operated at 3.3 V with a new high-speed, low-voltage operational amplifier and charge pump circuits. Measured performance includes 0.6 LSB of INL, 59.1 dB of SNDR (Signal-to-Noise-plus-Distortion-Ratio) for 100 kHz input at 20 Msample/s. At Nyquist sampling (10 MHz input) SNDR is 55.0 dB. Differential input range is /spl plusmn/1 V, and measured input referred RMS noise is 220 /spl mu/V. The power dissipation at 1 MS/s is below 3 mW with 58 dB of SNDR.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 13-b 2.5-MHz self-calibrated pipelined A/D converter in 3- mu m CMOS
Lin, Y.-M., Kim, B., & Gray, P. R. (1991) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.75065 · Cited by 201
Self-citationA 10-b 20-MHz 30-mW pipelined interpolating CMOS ADC
Kusumoto, K., Matsuzawa, A., & Murata, K. (1993) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.261992 · Cited by 129
Cited by
Analog-to-digital converter survey and analysis
Walden, R. H. (1999) · IEEE Journal on Selected Areas in Communications · doi:10.1109/49.761034 · Cited by 2,186
A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converter
Abo, A. M., & Gray, P. R. (1999) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.760369 · Cited by 923
Self-citationA 12-bit 75-MS/s pipelined ADC using open-loop residue amplification
Murmann, B., & Boser, B. E. (2003) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2003.819167 · Cited by 524
Kickback noise reduction techniques for CMOS latched comparators
Figueiredo, P. M., & Vital, J. C. (2006) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2006.875308 · Cited by 359
Low Voltage, Low Power, Inverter-Based Switched-Capacitor Delta-Sigma Modulator
Chae, Y., & Han, G. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2010973 · Cited by 333
Metadata
- Authors
- Cho, T. B., & Gray, P. R.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 1995-03
- Volume
- 30
- Issue
- 3
- Pages
- 166-172
- ISSN
- 0018-9200 (ISSN-L)
- OpenAlex
- W2123816021
- Cited by
- 633
- References
- 2
- FWCI
- 13.09
- Type
- journal article
- Language
- fr
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.