The DOI matches its Crossref record.
A battery state-of-charge indicator for electric wheelchairs
Abstract
Deep-discharge-type lead-acid batteries used in most electric wheelchairs require acurrate battery state-of-charge indication to prevent stranding and to provide economical operation of the wheelchair. A monitoring technique combining the open-circuit voltage and the coulometric measurements had been previously implemented on a microcomputer-based circuit. This adaptive monitoring technique enables the monitor to adjust to different battery sizes as well as the aging process. Several improvements are reported. A technique has been developed to enhance the acurracy and reduce the required rest period of the open-circuit voltage measurement. The open-circuit voltage recovery curve is approximated by two asymptotes on a semilog scale. The open-circuit voltage is then extrapolated from the slope of the first asymptote before it fully stabilizes. The accuracy of the monitor has been verified in field tests, and comparison with a commercial battery monitor shows it to be superior in several respects.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ng, K. S., Moo, C.-S., Chen, Y.-P., & Hsieh, Y.-C. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.021 · Cited by 1,636
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461
Waag, W., Fleischer, C., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.064 · Cited by 1,059
Energy Storage Systems for Automotive Applications
Lukic, S. M., Cao, J., Bansal, R. C., Rodriguez, F., & Emadi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918390 · Cited by 1,025
Sun, F., Hu, X., Zou, Y., & Li, S. (2011) · Energy · doi:10.1016/j.energy.2011.03.059 · Cited by 614
Zheng, F., Xing, Y., Jiang, J., Sun, B., Kim, J., & Pecht, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.010 · Cited by 574
Doerffel, D., & Sharkh, S. A. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.04.030 · Cited by 410
Dai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 405
Advanced Machine Learning Approach for Lithium-Ion Battery State Estimation in Electric Vehicles
Hu, X., Li, S. E., & Yang, Y. (2016) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2512237 · Cited by 375
Li-ion battery SOC estimation method based on the reduced order extended Kalman filtering
Lee, J., Nam, O., & Cho, B. H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.072 · Cited by 331
State of the Art of Lithium-Ion Battery SOC Estimation for Electrical Vehicles
Zhang, R., Xia, B., Li, B., Cao, L., Lai, Y., Zheng, W., Wang, H., & Wang, W. (2018) · Energies · doi:10.3390/en11071820 · Cited by 321
State-of-the-art of battery state-of-charge determination
Pop, V, Bergveld, H. J., Notten, P. H. L., & Regtien, P. P. L. (2005) · Measurement Science and Technology · doi:10.1088/0957-0233/16/12/r01 · Cited by 303
Hu, X., Sun, F., & Zou, Y. (2010) · Energies · doi:10.3390/en3091586 · Cited by 281
Li, J., Klee Barillas, J., Guenther, C., & Danzer, M. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.057 · Cited by 253
Tian, Y., Xia, B., Sun, W., Xu, Z., & Zheng, W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.143 · Cited by 229
Waag, W., & Sauer, D. U. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.001 · Cited by 216
Hu, X., Cao, D., & Egardt, B. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2675920 · Cited by 205
Robustness Evaluation of Extended and Unscented Kalman Filter for Battery State of Charge Estimation
Huang, C., Wang, Z., Zhao, Z., Wang, L., Lai, C. S., & Wang, D. (2018) · IEEE Access · doi:10.1109/access.2018.2833858 · Cited by 140
“A variety of approaches have been proposed to estimate the SOC including coulomb-counting methods [8], machine learning methods [9], and state observer methods [10].”
Method
Metadata
- Authors
- Aylor, J. H., Thieme, A., & Johnso, B. W.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1992
- Volume
- 39
- Issue
- 5
- Pages
- 398-409
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2133108516
- Cited by
- 209
- References
- 0
- FWCI
- 1.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.