The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Robust servosystem design with two degrees of freedom and its application to novel motion control of robot manipulators
Abstract
A novel robust servosystem design method based on the two-degree-of-freedom (TDOF) controller and its application to advanced motion control for a robot manipulator is proposed. This servosystem is derived from the simple parametrization. The command input response and the closed loop characteristics can be specified independently by using two parameters which belong to the ring of stable and proper rational functions. The sensitivity and the complementary sensitivity functions can be determined straightforwardly through the optimization of the two design parameters. The control performance of the servosystem has been demonstrated. A completely decentralized joint control system for multiaxis robut manipulators has been realized. In particular, various kinds of robot motion controls, such as compliance, force, and hybrid controls, are realized in a unified way based on the robust position control. This servosystem has been implemented using DSP.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Hybrid Position/Force Control of Manipulators
Raibert, M. H., & Craig, J. J. (1981) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3139652 · Cited by 3,015
Impedance Control: An Approach to Manipulation
Hogan, N. (1984) · 1984 American Control Conference · doi:10.23919/acc.1984.4788393 · Cited by 2,929
Compliance and Force Control for Computer Controlled Manipulators
Mason, M. T. (1981) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1981.4308708 · Cited by 1,542
Resolved-acceleration control of mechanical manipulators
Luh, J., Walker, M., & Paul, R. (1980) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1980.1102367 · Cited by 1,203
Adaptive manipulator control: A case study
Slotine, J.-J. E., & Weiping, L. (1988) · IEEE Transactions on Automatic Control · doi:10.1109/9.14411 · Cited by 1,032
Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System
Ohishi, K., Nakao, M., Ohnishi, K., & Miyachi, K. (1987) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1987.350923 · Cited by 614
Robust independent joint controller design for industrial robot manipulators
Hsia, T. C. S., Lasky, T. A., & Guo, Z. (1991) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.103479 · Cited by 240
Adaptive manipulator control a case study
Slotine, J.-J., & Li, W. (2005) · Proceedings. 1987 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1987.1087895 · Cited by 202
Neural controller for adaptive movements with unforeseen payloads
Kuperstein, M., & Wang, J. (1990) · IEEE Transactions on Neural Networks · doi:10.1109/72.80213 · Cited by 64
Independent parametrization of two-degree-of-freedom compensators in general robust tracking systems
Hara, S., & Sugie, T. (1986) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1986.267429 · Cited by 6
Cited by
Disturbance-Observer-Based Control and Related Methods—An Overview
Chen, W.-H., Yang, J., Guo, L., & Li, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2478397 · Cited by 2,985
Improving Disturbance-Rejection Performance Based on an Equivalent-Input-Disturbance Approach
She, J.-H., Fang, M., Ohyama, Y., Hashimoto, H., & Wu, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.905976 · Cited by 579
High-Precision Robust Force Control of a Series Elastic Actuator
Oh, S., & Kong, K. (2017) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2016.2614503 · Cited by 278
Metadata
- Authors
- Umeno, T., Kaneko, T., & Hori, Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1993
- Volume
- 40
- Issue
- 5
- Pages
- 473-485
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2138327849
- Cited by
- 284
- References
- 11
- FWCI
- 3.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.