The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Modeling of multilevel converters
Open accessAbstract
In this paper, the imbricated cells multilevel converters are studied and modeled from a control viewpoint. These converters make use of several switches connected in a series, which allows using switches with reduced voltage ratings; these low voltage switches have lower conduction losses and can switch at higher frequency. In addition to this feature common to all converters using series connected switches, the control signals of multilevel converters can be phase shifted to increase the apparent switching frequency and improve the dynamic performances of the whole converter. It is shown that a multilevel inverter leg, composed of p pairs of switches and p-1 capacitors, forms a multivariable nonlinear system that cannot be properly modeled by standard methods such as state-space averaging. The transient behavior of this system depends on the current harmonics and their phase shift with the different control signals. A specific model is detailed, studied, and used to illustrate the properties of these converters. In particular, the natural balancing of the voltage across the switches is demonstrated and the time constants involved in this process are determined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A general unified approach to modelling switching-converter power stages
MIDDLEBROOK, R. D., & ĆUK, S. (1977) · International Journal of Electronics · doi:10.1080/00207217708900678 · Cited by 1,424
Generalized averaging method for power conversion circuits
Sanders, S. R., Noworolski, J. M., Liu, X. Z., & Verghese, G. C. (1991) · IEEE Transactions on Power Electronics · doi:10.1109/63.76811 · Cited by 1,205
Multi-Level Choppers for High Voltage Applications
Meynard, T. A., & Foch, H. (1992) · EPE Journal · doi:10.1080/09398368.1992.11463285 · Cited by 494
Self-citationMultilevel converters and derived topologies for high power conversion
Meynard, T. A., & Foch, H. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1995.483327 · Cited by 65
Self-citation
Cited by
The age of multilevel converters arrives
Franquelo, L., Rodriguez, J., Leon, J., Kouro, S., Portillo, R., & Prats, M. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.923519 · Cited by 2,016
Abu-Rub, H., Holtz, J., Rodriguez, J., & Baoming, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043039 · Cited by 1,337
Multilevel Converters: An Enabling Technology for High-Power Applications
Rodriguez, J., Franquelo, L. G., Kouro, S., Leon, J. I., Portillo, R. C., Prats, M. A. M., & Perez, M. A. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2030235 · Cited by 1,196
Multilevel Converters: Fundamental Circuits and Systems
Akagi, H. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2682105 · Cited by 513
Multilevel converters for single-phase grid connected photovoltaic systems-an overview
Calais, M., & Agelidis, V. G. (2002) · IEEE International Symposium on Industrial Electronics. Proceedings. ISIE'98 (Cat. No.98TH8357) · doi:10.1109/isie.1998.707781 · Cited by 380
Metadata
- Authors
- Meynard, T. A., Fadel, M., & Aouda, N.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1997-06
- Volume
- 44
- Issue
- 3
- Pages
- 356-364
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2100048353
- Cited by
- 404
- References
- 4
- FWCI
- 0.50
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling of multilevel converters. https://app.cochat.ai/papers/10.1109/41.585833
- The paper
- Meynard, T. A., Fadel, M., & Aouda, N. (1997). Modeling of multilevel converters. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/41.585833
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.