The DOI matches its Crossref record.
Induction machine condition monitoring with higher order spectra
Abstract
This paper describes a novel method of detecting and unambiguously diagnosing the type and magnitude of three induction machine fault conditions from the single sensor measurement of the radial electromagnetic machine vibration. The detection mechanism is based on the hypothesis that the induction machine can be considered as a simple system, and that the action of the fault conditions are to alter the output of the system in a characteristic and predictable fashion. Further, the change in output and fault condition can be correlated allowing explicit fault identification. Using this technique, there is no requirement for a priori data describing machine fault conditions, the method is equally applicable to both sinusoidally and inverter-fed induction machines and is generally invariant of both the induction machine load and speed. The detection mechanisms are rigorously examined theoretically and experimentally, and it is shown that a robust and reliable induction machine condition-monitoring system has been produced. Further, this technique is developed into a software-based automated commercially applicable system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Amjad, S., Neelakrishnan, S., & Rudramoorthy, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.001 · Cited by 387
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250
Lasurt, I., Stronach, A. F., & Penman, J. (2002) · PeachFuzz 2000. 19th International Conference of the North American Fuzzy Information Processing Society - NAFIPS (Cat. No.00TH8500) · doi:10.1109/nafips.2000.877411 · Cited by 30
Self-citationStator Short Circuits Detection in PMSM by means of Higher Order Spectral Analysis (HOSA)
Rosero, J., Ortega, J., Urresty, J., Cardenas, J., & Romeral, L. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802779 · Cited by 22
Metadata
- Authors
- Arthur, N., & Penman, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2000
- Volume
- 47
- Issue
- 5
- Pages
- 1031-1041
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2102083315
- Cited by
- 170
- References
- 0
- FWCI
- 15.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.