The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Modeling 1-3 composite piezoelectrics: thickness-mode oscillations
Abstract
A simple physical model of 1-3 composite piezoelectrics is advanced for the material properties that are relevant to thickness-mode oscillations. This model is valid when the lateral spatial scale of the composite is sufficiently fine that the composite can be treated as an effective homogeneous medium. Expressions for the composite's material parameters in terms of the volume fraction of piezoelectric ceramic and the properties of the constituent piezoelectric ceramic and passive polymer are derived. A number of examples illustrate the implications of using piezocomposites in medical ultrasonic imaging transducers. While most material properties of the composite roughly interpolate between their values for pure polymer and pure ceramic, the composite's thickness-mode electromechanical coupling can exceed that of the component ceramic. This enhanced electromechanical coupling stems from partially freeing the lateral clamping of the ceramic in the composite structure. Their higher coupling and lower acoustic impedance recommend composites for medical ultrasonic imaging transducers. The model also reveals that the composite's material properties cannot be optimized simultaneously; tradeoffs must be made. Of most significance is the tradeoff between the desired lower acoustic impedance and the undesired smaller electromechanical coupling that occurs as the volume fraction of piezoceramic is reduced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Connectivity and piezoelectric-pyroelectric composites
Newnham, R. E., Skinner, D. P., & Cross, L. E. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90161-7 · Cited by 1,916
Chan, H. L. W., & Unsworth, J. (1989) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/58.31780 · Cited by 425
Gururaja, T. R., Schulze, W. A., Cross, L. E., Newnham, R. E., Auld, B. A., & Wang, Y. J. (1985) · IEEE Transactions on Sonics and Ultrasonics · doi:10.1109/t-su.1985.31623 · Cited by 364
Self-citation
Cited by
Acoustic band structure of periodic elastic composites
Kushwaha, M. S., Halevi, P., Dobrzynski, L., & Djafari-Rouhani, B. (1993) · Physical Review Letters · doi:10.1103/physrevlett.71.2022 · Cited by 2,937
Ultrasonic arrays for non-destructive evaluation: A review
Drinkwater, B. W., & Wilcox, P. D. (2006) · NDT & E International · doi:10.1016/j.ndteint.2006.03.006 · Cited by 1,147
High performance ferroelectric relaxor-PbTiO3 single crystals: Status and perspective
Zhang, S., & Li, F. (2012) · Journal of Applied Physics · doi:10.1063/1.3679521 · Cited by 966
Theory of acoustic band structure of periodic elastic composites
Kushwaha, M. S., Halevi, P., Martínez, G., Dobrzynski, L., & Djafari-Rouhani, B. (1994) · Physical Review B · doi:10.1103/physrevb.49.2313 · Cited by 888
Zhang, S., Li, F., Jiang, X., Kim, J., Luo, J., & Geng, X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.002 · Cited by 875
Micromechanics predictions of the effective electroelastic moduli of piezoelectric composites
Dunn, M. L., & Taya, M. (1993) · International Journal of Solids and Structures · doi:10.1016/0020-7683(93)90058-f · Cited by 547
Piezoelectric single crystal ultrasonic transducers for biomedical applications
Zhou, Q., Lam, K. H., Zheng, H., Qiu, W., & Shung, K. K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.001 · Cited by 442
A Review of Acoustic Impedance Matching Techniques for Piezoelectric Sensors and Transducers
Rathod, V. T. (2020) · Sensors · doi:10.3390/s20144051 · Cited by 328
Chee, C. Y. K., Tong, L., & Steven, G. P. (1998) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x9800900101 · Cited by 293
Srivastava, S., Schaefer, J. L., Yang, Z., Tu, Z., & Archer, L. A. (2014) · Advanced Materials · doi:10.1002/adma.201303070 · Cited by 290
Inorganic ceramic/polymer ferroelectric composite electrets
Dias, C. J., & Das-Gupta, D. K. (1996) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/94.544188 · Cited by 282
Ultrasound-induced wireless energy harvesting: from materials strategies to functional applications
Jiang, L., Yang, Y., Chen, Y., & Zhou, Q. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105131 · Cited by 131
Metadata
- Authors
- Smith, W. A., & Auld, B. A.
- Venue
- IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
- Published
- 1991-01
- Volume
- 38
- Issue
- 1
- Pages
- 40-47
- ISSN
- 0885-3010 (ISSN-L)
- OpenAlex
- W2132251969
- Cited by
- 832
- References
- 3
- FWCI
- 15.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.