The DOI matches its Crossref record.
Electromechanical coupling and output efficiency of piezoelectric bending actuators
Abstract
Electromechanical coupling mechanisms in piezoelectric bending actuators are discussed in this paper based on the constitutive equations of cantilever bimorph and unimorph actuators. Three actuator characteristic parameters, (e.g., electromechanical coupling coefficient, maximum energy transmission coefficient, and maximum mechanical output energy) are discussed for cantilever bimorph and unimorph actuators. In the case of the bimorph actuator, if the effect of the bonding layer is negligible, these parameters are directly related to the transverse coupling factor lest. In the case of the unimorph actuator, these parameters also depend on the Young's modulus and the thickness of the elastic layer. Maximum values for these parameters can be obtained by choosing proper thickness ratio and Young's modulus ratio of elastic and piezoelectric layers. Calculation results on four unimorph actuators indicate that the use of stiffer elastic material is preferred to increase electromechanical coupling and output mechanical energy in unimorph actuators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
On the Effectiveness of Vibration-based Energy Harvesting
Roundy, S. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05054042 · Cited by 654
A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits
Priya, S., Song, H.-C., Zhou, Y., Varghese, R., Chopra, A., Kim, S.-G., Kanno, I., Wu, L., Ha, D. S., Ryu, J., et al. (2019) · Energy Harvesting and Systems · doi:10.1515/ehs-2016-0028 · Cited by 433
Transient, Biocompatible Electronics and Energy Harvesters Based on ZnO
Dagdeviren, C., Hwang, S., Su, Y., Kim, S., Cheng, H., Gur, O., Haney, R., Omenetto, F. G., Huang, Y., & Rogers, J. A. (2013) · Small · doi:10.1002/smll.201300146 · Cited by 412
Piezoelectric MEMS for energy harvesting
Kim, S.-G., Priya, S., & Kanno, I. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.275 · Cited by 320
Optimal energy density piezoelectric bending actuators
Wood, R. J., Steltz, E., & Fearing, R. S. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.10.024 · Cited by 258
Metadata
- Authors
- Wang, Q.-M., Du, X.-H., Xu, B., & Cross, L. E.
- Venue
- IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
- Published
- 1999-05
- Volume
- 46
- Issue
- 3
- Pages
- 638-646
- ISSN
- 0885-3010 (ISSN-L)
- OpenAlex
- W2171620025
- Cited by
- 245
- References
- 0
- FWCI
- 13.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electromechanical coupling and output efficiency of piezoelectric bending actuators. https://app.cochat.ai/papers/10.1109/58.764850
- The paper
- Wang, Q.-M., Du, X.-H., Xu, B., & Cross, L. E. (1999). Electromechanical coupling and output efficiency of piezoelectric bending actuators. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. https://doi.org/10.1109/58.764850
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.