The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits
Open accessAbstract
Piezoelectric microelectromechanical systems (PiezoMEMS) are attractive for developing next generation self-powered microsystems. PiezoMEMS promises to eliminate the costly assembly for microsensors/microsystems and provide various mechanisms for recharging the batteries, thereby, moving us closer towards batteryless wireless sensors systems and networks. In order to achieve practical implementation of this technology, a fully assembled energy harvester on the order of a quarter size dollar coin (diameter=24.26 mm, thickness=1.75 mm) should be able to generate about 100 μW continuous power from low frequency ambient vibrations (below 100 Hz). This paper reviews the state-of-the-art in microscale piezoelectric energy harvesting, summarizing key metrics such as power density and bandwidth of reported structures at low frequency input. This paper also describes the recent advancements in piezoelectric materials and resonator structures. Epitaxial growth and grain texturing of piezoelectric materials is being developed to achieve much higher energy conversion efficiency. For embedded medical systems, lead-free piezoelectric thin films are being developed and MEMS processes for these new classes of materials are being investigated. Non-linear resonating beams for wide bandwidth resonance are also reviewed as they would enable wide bandwidth and low frequency operation of energy harvesters. Particle/granule spray deposition techniques such as aerosol-deposition (AD) and granule spray in vacuum (GSV) are being matured to realize the meso-scale structures in a rapid manner. Another important element of an energy harvester is a power management circuit, which should maximize the net energy harvested. Towards this objective, it is essential for the power management circuit of a small-scale energy harvester to dissipate minimal power, and thus it requires special circuit design techniques and a simple maximum power point tracking scheme. Overall, the progress made by the research and industrial community has brought the energy harvesting technology closer to the practical applications in near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals
Park, S.-E., & Shrout, T. R. (1997) · Journal of Applied Physics · doi:10.1063/1.365983 · Cited by 4,157
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
Energy Harvesting Technologies
(2009) · Springer eBooks · doi:10.1007/978-0-387-76464-1 · Cited by 1,910
A piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
Guyomar, D., Badel, A., Lefeuvre, E., & Richard, C. (2005) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2005.1428041 · Cited by 1,049
Thin Film Piezoelectrics for MEMS
Trolier-McKinstry, S., & Muralt, P. (2004) · Journal of Electroceramics · doi:10.1023/b:jecr.0000033998.72845.51 · Cited by 1,023
Dielectric and Piezoelectric Properties of 0.91Pb(Zn1/3Nb2/3)O3-0.09PbTiO3 Single Crystals
Kuwata, J., Uchino, K., & Nomura, S. (1982) · Japanese Journal of Applied Physics · doi:10.1143/jjap.21.1298 · Cited by 1,000
Energy harvesting from the nonlinear oscillations of magnetic levitation
Mann, B. P., & Sims, N. D. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.06.011 · Cited by 972
Cited by
A comprehensive review on the state-of-the-art of piezoelectric energy harvesting
Sezer, N., & Koç, M. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105567 · Cited by 1,480
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“The reader is referred to the comprehensive reviews of MEMS piezoelectric harvesting presented by Saadon and Sidek in 2011 [21], Priya et al in 2017 [263], and Tian et al in 2018 [264] as well as the book by Kottapalli et al in 2019 [265] for a more complete treatment of the field.”
MethodPiezoelectric Biomaterials for Sensors and Actuators
Chorsi, M. T., Curry, E. J., Chorsi, H. T., Das, R., Baroody, J., Purohit, P. K., Ilies, H., & Nguyen, T. D. (2019) · Advanced Materials · doi:10.1002/adma.201802084 · Cited by 865
Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A Systematic Review
Mishra, S., Unnikrishnan, L., Nayak, S. K., & Mohanty, S. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800463 · Cited by 556
Harvesting electrical energy from carbon nanotube yarn twist
Kim, S. H., Haines, C. S., Li, N., Kim, K. J., Mun, T. J., Choi, C., Di, J., Oh, Y. J., Oviedo, J. P., Bykova, J., et al. (2017) · Science · doi:10.1126/science.aam8771 · Cited by 422
Self-citation
Metadata
- Authors
- Priya, S., Song, H.-C., Zhou, Y., Varghese, R., Chopra, A., Kim, S.-G., Kanno, I., Wu, L., Ha, D. S., Ryu, J., & Polcawich, R. G.
- Venue
- Energy Harvesting and Systems
- Publisher
- Walter de Gruyter GmbH
- Published
- 2017-01-01
- Volume
- 4
- Issue
- 1
- Pages
- 3-39
- ISSN
- 2329-8766 (ISSN-L)
- 2329-8774
- OpenAlex
- W2585218234
- Cited by
- 433
- References
- 79
- FWCI
- 27.43
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits. https://app.cochat.ai/papers/10.1515/ehs-2016-0028
- The paper
- Priya, S., Song, H.-C., Zhou, Y., Varghese, R., Chopra, A., Kim, S.-G., Kanno, I., Wu, L., Ha, D. S., Ryu, J., & Polcawich, R. G. (2019). A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits. Energy Harvesting and Systems. https://doi.org/10.1515/ehs-2016-0028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.