The DOI matches its Crossref record.
On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors
Abstract
The introduction reviews the real practical problems of airgap eccentricity in large 3-phase induction motors. On-line monitoring methods for diagnosing airgap eccentricity are also discussed and a state of the art review on the application of current monitoring to detect airgap eccentricity is presented. The limitations of the classical MMF and permeance wave approach for predicting the severity of airgap eccentricity are discussed. The time stepping finite element (FE) method and FFT analysis technique are used as 'analyses tools' to predict the frequency components in the current (Hz and dB) as a function of static airgap eccentricity. Excellent agreement is obtained between the measured and predicted frequency components (Hz) in the current spectra which are a function of static eccentricity. The FE method is also used to predict the magnitude (dB) of these frequency components in the current spectrum with different levels of static airgap eccentricity. These predictions are much closer to the measured values in comparison to previous attempts using the classical MMF and permeance wave approach. The contents of this paper will be of particular interest to the manufacturers and industrial users of three-phase induction motors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Current Signature Analysis to Detect Induction Motor Faults
Thomson, W. T., & Fenger, M. (2001) · IEEE Industry Applications Magazine · doi:10.1109/2943.930988 · Cited by 1,139
Self-citationReview of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Condition monitoring techniques for electrical equipment-a literature survey
Han, Y., & Song, Y. H. (2003) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2002.801425 · Cited by 381
Nandi, S., Ahmed, S., & Toliyat, H. A. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.937205 · Cited by 340
Nandi, S., Ahmed, S., & Toliyat, H. (2001) · IEEE Power Engineering Review · doi:10.1109/mper.2001.4311622 · Cited by 298
Metadata
- Authors
- Thomson, W. T., & Barbour, A.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 1998
- Volume
- 13
- Issue
- 4
- Pages
- 347-357
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2165294818
- Cited by
- 173
- References
- 0
- FWCI
- 1.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors. https://app.cochat.ai/papers/10.1109/60.736320
- The paper
- Thomson, W. T., & Barbour, A. (1998). On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors. IEEE Transactions on Energy Conversion. https://doi.org/10.1109/60.736320
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.